Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

PRODUCTIVELY SCALING HARDWARE DESIGNS OVER INCREASING RESOURCES USING A SYSTEMATIC DESIGN ANALYSIS APPROACH

As processor development shifts from strict single core frequency scaling to het- erogeneous resource scaling two important considerations require evaluation. First, how to design systems with an increasing amount of heterogeneous resources, and second, how to maintain a designer’s productivity as the number of possible con- figurations grows. Therefore, it is necessary to determine what useful information can be gathered from existing designs to help predict or identify a design’s potential scalability, as well as, identifying which routine tasks can be automated to improve a designer’s productivity. Moreover, once this information is collected, how can this information be conveyed to the designer such that it can be used to increase overall productivity when implementing the design over increasing amounts of resources? This research looks at various approaches to analyze designs and attempts to distribute an application efficiently across a heterogeneous cluster of computing re- sources through the use of a Systematic Design Analysis flow and an assortment of productivity tools. These tools provide the designer with projections on the amount of resources needed to scale an existing design to a specified performance, as well as, projecting the performance based on a specified amount of resources. This is accomplished through the combination of static HDL profiling, component synthesis resource utilization, and runtime performance monitoring. For evaluation, four case studies are presented to demonstrate the proposed flow’s scalability on a small scale cluster of FPGAs. The results are highly favorable, providing orders of magnitude speedup with minimal intervention from the designer

Design of a low-cost high speed data capture card for the Hubble Sphere Hydrogen Survey

Includes bibliographical references (leaves 101-105).This thesis describes the design and implementation of a low-cost high speed data capture card for the Hubble Sphere Hydrogen Survey (HSHS). The Hubble Space Hydrogen Survey was initiated in an effort to build a low-cost cylindrical radio telescope for an all sky redshift survey with the observational goal to produce a 3-dimensional mapping of the bulk Hubble Sphere using Hydrogen 21cm emissions. This dissertation ï¬ rst investigates the system design to see how each of the user speciï¬ cations set by the planning team could be achieved in terms of design decisions, component selection and schematic capture. The final design. AstroGIG, satisï¬ es the user speciï¬ cations by capturing data up to a full power bandwidth of 1.7GHz with an instantaneous bandwidth of ≤ 250MHz white maximizing the dynamic range. AstroGIG buffers, processes, stores and ï¬ nally transmits the data through a 4-lane PCI-Express interface to a standard PC where the majority of the processing is performed. The system implementation is then described where issues relating to the process of transforming schematics into a physical PCB, and HSHS integration are discussed. The design is veriï¬ ed through Hyperlynx simulations to give a high degree of certainty that physical implementation and production would be successful. Results from tests on the actual hardware characterizing the overall system performance are presented. Conclusions are drawn based on these results and suggestions for future work and design improvements are recommended

Designing Efficient Network Interfaces For System Area Networks

The network is the key component of a Cluster of Workstations/PCs. Its performance, measured in terms of bandwidth and latency, has a great impact on the overall system performance. It quickly became clear that traditional WAN/LAN technology is not too well suited for interconnecting powerful nodes into a cluster. Their poor performance too often slows down communication-intensive applications. This observation led to the birth of a new class of networks called System Area Networks (SAN). The ATOLL network introduces a new optimized architecture for SANs. On a single chip, not one but four network interfaces (NI) have been implemented, together with an on-chip 4x4 full-duplex switch and four link interfaces. This unique "Network on a Chip" architecture is best suited for interconnecting SMP nodes, where multiple CPUs are given an exclusive NI and do not have to share a single interface. It also removes the need for any additional switching hardware, since the four byte-wide full-duplex links can be connected by cables with neighbor nodes in an arbitrary network topology

Integrating simultaneous bi-direction signalling in the test fabric of 3D stacked integrated circuits.

Jennions, Ian K. - Associate SupervisorThe world has seen significant advancements in electronic devices’ capabilities, most notably the ability to embed ultra-large-scale functionalities in lightweight, area and power-efficient devices. There has been an enormous push towards quality and reliability in consumer electronics that have become an indispensable part of human life. Consequently, the tests conducted on these devices at the final stages before these are shipped out to the customers have a very high significance in the research community. However, researchers have always struggled to find a balance between the test time (hence the test cost) and the test overheads; unfortunately, these two are inversely proportional. On the other hand, the ever-increasing demand for more powerful and compact devices is now facing a new challenge. Historically, with the advancements in manufacturing technology, electronic devices witnessed miniaturizing at an exponential pace, as predicted by Moore’s law. However, further geometric or effective 2D scaling seems complicated due to performance and power concerns with smaller technology nodes. One promising way forward is by forming 3D Stacked Integrated Circuits (SICs), in which the individual dies are stacked vertically and interconnected using Through Silicon Vias (TSVs) before being packaged as a single chip. This allows more functionality to be embedded with a reduced footprint and addresses another critical problem being observed in 2D designs: increasingly long interconnects and latency issues. However, as more and more functionality is embedded into a small area, it becomes increasingly challenging to access the internal states (to observe or control) after the device is fabricated, which is essential for testing. This access is restricted by the limited number of Chip Terminals (IC pins and the vertical Through Silicon Vias) that a chip could be fitted with, the power consumption concerns, and the chip area overheads that could be allocated for testing. This research investigates Simultaneous Bi-Directional Signaling (SBS) for use in Test Access Mechanism (TAM) designs in 3D SICs. SBS enables chip terminals to simultaneously send and receive test vectors on a single Chip Terminal (CT), effectively doubling the per-pin efficiency, which could be translated into additional test channels for test time reduction or Chip Terminal reduction for resource efficiency. The research shows that SBS-based test access methods have significant potential in reducing test times and/or test resources compared to traditional approaches, thereby opening up new avenues towards cost-effectiveness and reliability of future electronics.PhD in Manufacturin

Optical Technologies and Control Methods for Scalable Data Centre Networks

Attributing to the increasing adoption of cloud services, video services and associated machine learning applications, the traffic demand inside data centers is increasing exponentially, which necessitates an innovated networking infrastructure with high scalability and cost-efficiency. As a promising candidate to provide high capacity, low latency, cost-effective and scalable interconnections, optical technologies have been introduced to data center networks (DCNs) for approximately a decade. To further improve the DCN performance to meet the increasing traffic demand by using photonic technologies, two current trends are a)increasing the bandwidth density of the transmission links and b) maximizing IT and network resources utilization through disaggregated topologies and architectures. Therefore, this PhD thesis focuses on introducing and applying advanced and efficient technologies in these two fields to DCNs to improve their performance. On the one hand, at the link level, since the traditional single-mode fiber (SMF) solutions based on wavelength division multiplexing (WDM) over C+L band may fall short in satisfying the capacity, front panel density, power consumption, and cost requirements of high-performance DCNs, a space division multiplexing (SDM) based DCN using homogeneous multi-core fibers (MCFs) is proposed.With the exploited bi-directional model and proposed spectrum allocation algorithms, the proposed DCN shows great benefits over the SMF solution in terms of network capacity and spatial efficiency. In the meanwhile, it is found that the inter-core crosstalk (IC-XT) between the adjacent cores inside the MCF is dynamic rather than static, therefore, the behaviour of the IC-XT is experimentally investigated under different transmission conditions. On the other hand, an optically disaggregated DCN is developed and to ensure the performance of it, different architectures, topologies, resource routing and allocation algorithms are proposed and compared. Compared to the traditional server-based DCN, the resource utilization, scalability and the cost-efficiency are significantly improved

Automated Debugging Methodology for FPGA-based Systems

Electronic devices make up a vital part of our lives. These are seen from mobiles, laptops, computers, home automation, etc. to name a few. The modern designs constitute billions of transistors. However, with this evolution, ensuring that the devices fulfill the designer’s expectation under variable conditions has also become a great challenge. This requires a lot of design time and effort. Whenever an error is encountered, the process is re-started. Hence, it is desired to minimize the number of spins required to achieve an error-free product, as each spin results in loss of time and effort. Software-based simulation systems present the main technique to ensure the verification of the design before fabrication. However, few design errors (bugs) are likely to escape the simulation process. Such bugs subsequently appear during the post-silicon phase. Finding such bugs is time-consuming due to inherent invisibility of the hardware. Instead of software simulation of the design in the pre-silicon phase, post-silicon techniques permit the designers to verify the functionality through the physical implementations of the design. The main benefit of the methodology is that the implemented design in the post-silicon phase runs many order-of-magnitude faster than its counterpart in pre-silicon. This allows the designers to validate their design more exhaustively. This thesis presents five main contributions to enable a fast and automated debugging solution for reconfigurable hardware. During the research work, we used an obstacle avoidance system for robotic vehicles as a use case to illustrate how to apply the proposed debugging solution in practical environments. The first contribution presents a debugging system capable of providing a lossless trace of debugging data which permits a cycle-accurate replay. This methodology ensures capturing permanent as well as intermittent errors in the implemented design. The contribution also describes a solution to enhance hardware observability. It is proposed to utilize processor-configurable concentration networks, employ debug data compression to transmit the data more efficiently, and partially reconfiguring the debugging system at run-time to save the time required for design re-compilation as well as preserve the timing closure. The second contribution presents a solution for communication-centric designs. Furthermore, solutions for designs with multi-clock domains are also discussed. The third contribution presents a priority-based signal selection methodology to identify the signals which can be more helpful during the debugging process. A connectivity generation tool is also presented which can map the identified signals to the debugging system. The fourth contribution presents an automated error detection solution which can help in capturing the permanent as well as intermittent errors without continuous monitoring of debugging data. The proposed solution works for designs even in the absence of golden reference. The fifth contribution proposes to use artificial intelligence for post-silicon debugging. We presented a novel idea of using a recurrent neural network for debugging when a golden reference is present for training the network. Furthermore, the idea was also extended to designs where golden reference is not present