Maximization of correct decision probability via channel switching over Rayleigh fading channels

In this study, optimal channel switching (time sharing) strategies are investigated under average power and cost constraints in order to maximize the average number of correctly received symbols between a transmitter and a receiver that are connected via multiple additive Gaussian noise channels. The optimal strategy is shown to perform channel switching either among at most three channels with full channel utilization (i.e., no idle periods), or between at most two channels with partial channel utilization. In addition, it is stated that the optimal solution must operate at the maximum average power and the maximum average cost, which facilitates low-complexity approaches for calculating the optimal strategy. For two-channel strategies, an upper bound in terms of the noise standard deviations of the employed channels is provided for the ratio between the optimal power levels. Furthermore, a simple condition depending solely on the systems parameters is derived, under which partial channel utilization cannot be optimal. Numerical examples are presented to demonstrate the validity of the theoretical results. © 2016 IEEE

Maximization of average number of correctly received symbols over multiple channels in the presence of idle periods

In this study, optimal channel switching (time sharing) strategies are investigated under average power and cost constraints for maximizing the average number of correctly received symbols between a transmitter and a receiver that are connected via multiple flat-fading channels with additive Gaussian noise. The optimal strategy is shown to correspond to channel switching either among at most three different channels with full channel utilization (i.e., no idle periods), or between at most two different channels with partial channel utilization. Also, it is stated that the optimal solution must operate at the maximum average power and the maximum average cost, which facilitates low-complexity approaches for obtaining the optimal strategy. For two-channel strategies, an upper bound is derived, in terms of the parameters of the employed channels, on the ratio between the optimal power levels. In addition, theoretical results are derived for characterizing the optimal solution for channel switching between two channels, and for comparing performance of single channel strategies. Sufficient conditions that depend solely on the systems parameters are obtained for specifying when partial channel utilization cannot be optimal. Furthermore, the proposed optimal channel switching problem is investigated for logarithmic cost functions, and various theoretical results are obtained related to the optimal strategy. Numerical examples are presented to illustrate the validity of the theoretical results. © 2016 Elsevier Inc. All rights reserved

Design guidelines for spatial modulation

A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants

The Impact of Channel Feedback on Opportunistic Relay Selection for Hybrid-ARQ in Wireless Networks

This paper presents a decentralized relay selection protocol for a dense wireless network and describes channel feedback strategies that improve its performance. The proposed selection protocol supports hybrid automatic-repeat-request transmission where relays forward parity information to the destination in the event of a decoding error. Channel feedback is employed for refining the relay selection process and for selecting an appropriate transmission mode in a proposed adaptive modulation transmission framework. An approximation of the throughput of the proposed adaptive modulation strategy is presented, and the dependence of the throughput on system parameters such as the relay contention probability and the adaptive modulation switching point is illustrated via maximization of this approximation. Simulations show that the throughput of the proposed selection strategy is comparable to that yielded by a centralized selection approach that relies on geographic information.Comment: 30 pages, 9 figures, submitted to the IEEE Transactions on Vehicular Technology, revised March 200

A Survey of Blind Modulation Classification Techniques for OFDM Signals

Blind modulation classification (MC) is an integral part of designing an adaptive or intelligent transceiver for future wireless communications. Blind MC has several applications in the adaptive and automated systems of sixth generation (6G) communications to improve spectral efficiency and power efficiency, and reduce latency. It will become a integral part of intelligent software-defined radios (SDR) for future communication. In this paper, we provide various MC techniques for orthogonal frequency division multiplexing (OFDM) signals in a systematic way. We focus on the most widely used statistical and machine learning (ML) models and emphasize their advantages and limitations. The statistical-based blind MC includes likelihood-based (LB), maximum a posteriori (MAP) and feature-based methods (FB). The ML-based automated MC includes k-nearest neighbors (KNN), support vector machine (SVM), decision trees (DTs), convolutional neural networks (CNNs), recurrent neural networks (RNNs), and long short-term memory (LSTM) based MC methods. This survey will help the reader to understand the main characteristics of each technique, their advantages and disadvantages. We have also simulated some primary methods, i.e., statistical- and ML-based algorithms, under various constraints, which allows a fair comparison among different methodologies. The overall system performance in terms bit error rate (BER) in the presence of MC is also provided. We also provide a survey of some practical experiment works carried out through National Instrument hardware over an indoor propagation environment. In the end, open problems and possible directions for blind MC research are briefly discussed