All optical signal regeneration technique design and real time implementation for different modulation schemes using ultrascale FPGA

The all-optical signal regeneration is a demanding research area for long haul optical communication systems. Electronic signal regeneration is limited due to its real-time infeasibility in terms of data rate and accumulated losses; therefore, all-optical signal regeneration is utilized to overcome these issues. The existing all-optical signal regeneration techniques have not been able to facilitate low power consumption, demonstration of real-time low cost commercial based design systems and application for the optical systems. In this research, a new all-optical signal regeneration technique is developed using single- pump Phase Sensitive Amplification, designed Optical Frequency Locked Model and noise mitigation model. The designed technique consumes less power than existing signal regeneration techniques for 10Gb/s optical degraded signal for different amplitude and phase modulation formats transmitted at different transmission distances between 50 km to 250 km. The designed all-optical signal regeneration technique is realized using numerically and verified using Simulink model. A real-time demonstration and commercial design based application is developed using Xilinx KCU105 UltraScale FPGA. The new all-optical signal regeneration technique has achieved a very low Bit Error Rate (BER) of 10-13 at low received power of -16 dBm averagely for different transmission distances between 50 km to 250 km via simulation and experiment. The new all-optical signal regeneration technique consumes low power of -16dBm, compared to existing all-optical signal regeneration techniques that consumes -9dBm. The new all-optical signal regeneration technique consumes 45% less power; with low BER and low received power compared to existing technique. The new all-optical signal regeneration system offers, real time implementation, live monitoring and commercial based design for Differential Phase Shift keying (DPSK) Non-Return-to-Zero (NRZ), DPSK-Return-to-Zero (RZ), Binary PSK (BPSK), Differential BPSK, Quadrature PSK, Orthogonal Frequency Division Multiplexing (OFDM), Quadrature Amplitude Modulation (QAM), Binary Frequency Shift Keying (BFSK), 8-PSK, and On-Off Keying (OOK)

Demonstrating effective all-optical processing in ultrafast data networks using semiconductor optical amplifiers

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references.The demand for bandwidth in worldwide data networks continues to increase due to growing Internet use and high-bandwidth applications such as video. All-optical signal processing is one promising technique for providing the necessary capacity and offers payload transparency, power consumption which scales efficiently with increasing bit rates, reduced processing latency, and ultrafast performance. In this thesis, we focus on using semiconductor optical amplifier-based logic gates to address both routing and regeneration needs in ultrafast data networks. To address routing needs, we demonstrate a scalable, multi-packet all-optical header processing unit operating at a line rate of 40 Gb/s. For this experiment, we used the ultrafast nonlinear interferometer (UNI) gate, a discrete optical logic gate which has been demonstrated at speeds of 100 Gb/s for bit-wise switching. However, for all-optical switching to become a reality, integration is necessary to significantly reduce the cost of manufacturing, installation, and operation. One promising integrated all-optical logic gate is the semiconductor optical amplifier Mach-Zehnder interferometer (SOA-MZI). This gate has previously been demonstrated capable of up to 80 Gb/s bit-wise switching operation. To enable simple installation and operation of this gate, we developed a performance optimization method which can quickly and accurately pinpoint the optimal operating point of the switch. This eliminates the need for a time-intensive search over a large parameter space and significantly simplifies the operation of the switch. With this method, we demonstrate the ability of a single SOA-MZI logic gate to regenerate ultrafast pulses over 100 passes and 10,000 km in a regenerative loop. Ultimately, all-optical logic gates must be integrated on a single low-cost platform and demonstrated in cascaded, multi-gate operation for increased functionality.(cont.) This requires low-loss monolithic integration. Our approach to this involves an asymmetric twin waveguide (ATG) design. This design also has the potential for high-yields as a result of a high tolerance for fabrication errors. We present our characterization results of ATG waveguides and proposals for future improvements.by Jade P. Wang.Ph.D

Parametric analysis of microwave and laser systems for communication and tracking Quarterly report, 6 Mar. - 6 Jun. 1966

Parametric analysis of microwave and laser systems for communication and tracking - updated reference data for advanced space communication and tracking system

Generation and application of dynamic gratings in optical fibers using stimulated Brillouin scattering

Since the invention of optical fiber cable data transmission using light has become ubiquitous in the past years. Nonlinear optical effects, which are hardly noticed in our daily life, have become crucial and highly influential for the design and performance of advance high-capacity systems. Future optical systems will definitely require signal processing operations to be performed on data signals “on the fly” solely in the optical domain. Brillouin scattering is currently one of the most prominent nonlinear effects in optical fibers, as it has found many applications in various fields of photonics, such as slow light, new high coherent sources, filters, optical fiber sensing, etc. In this thesis we investigate a novel phenomenon based on Stimulated Brillouin Scattering, which is called dynamic Brillouin grating (DBG). Investigating the process of DBG generation in optical fibers we propose several new approaches to realize new tools for signal processing of the optical signal by using phonon-photon interactions. First an analytical model is proposed to describe localized DBG generation in optical fibers using three coupled equations for Stimulated Brillouin Scattering. Based on this model we can show how the grating is generated and which shape it has in time when two pump pulses are used with optical frequency difference equal to the Brillouin shift of the fiber. Moreover optical phase conjugation is also theoretically predicted for the optical wave reflected from DBG. Several applications of Dynamic Brillouin grating are identified and investigated. An optical signal delay line or buffer is proposed and experimentally demonstrated using DBG principle. Storage of an input optical pulse is achieved by changing the position of the localized DBG inside the fiber. Here DBG acts as a Bragg reflector for the optical pulse and change in DBG position defines the time-of-flight of the input and reflected pulse. Single pulse delays can be dynamically controlled with a buffer capacity ranging from several picoseconds to more than one microsecond. Such delays show that DBG based signal delay lines can easily outperform slow light based delay lines in terms of delay-bandwidth product. Optical delay of pulse trains is also achieved, but with maximum limited amount of delay governed by the acoustic wave decay constant, which in standard silica fibers is around 10-12 ns. Moreover microwave photonic signals can be also delayed using DBG demonstrating true time delay. In this configuration, the reflection bandwidth of the DBG defines the maximum operational radio frequency. Relation of the DBG bandwidth as a function of its length was measured and it was determined that DBG exhibits similar properties as weak uniform fiber Bragg grating (FBG). Another application of the DBG gratings is demonstrated by exploiting this phenomenon to realize microwave photonic filters. For the first time, two-, three- and four-tap microwave photonic filter configurations are realized based on DBG. Free spectral range and IV tcartsbA stop band central frequencies of the proposed microwave filters can be easily tuned by adjusting the properties and positions of DBGs. Dynamic gratings generated by amplitude modulated pump waves are used to realize optical differentiation, integration and time reversal of input optical signals. Performed experiments demonstrate that a DBG based signal processor performs operations on the complex amplitude of the input optical wave. The DBG based integrator offers high flexibility in terms of operational wavelength and variable integration time, which can be controlled by changing the DBG length. For the first time, new operations of true time reversal of several bit sequences are performed using dynamic Brillouin grating. To overcome the problem of the decay of the localized acoustic grating, a novel method based on phase modulation by pseudo-random bit sequence (PRBS) is proposed, which allows generation of localized and stationary DBG at random positions inside the fiber. Such a method opens up new possibilities for signal control, and for optical fiber sensing. Advantages and limitations of the PRBS technique in terms of signal-to-noise ratio are discussed. It is experimentally verified that PRBS generation of DBG is highly attractive for the operations on optical signals where time averaging is possible, such as in the fields of microwave photonics and distributed fiber sensing. On the other hand, it was experimentally verified that realization of the optical buffer for continuous digital data using the PRBS technique is difficult due to the substantial amount of instantaneous noise. A separate chapter of this thesis is devoted to the application of DBG to the field of distributed fiber sensing. A DBG based distributed temperature and stress sensor in polarization maintaining fibers has been realized, showing 1 cm spatial resolution, which is - to the best of our knowledge - first time, demonstrated using a pulsed-based Brillouin sensor. The demonstration is performed in a 20 m fiber, but the sensing range of the proposed DBG based sensor can be expanded up to several hundred meters. In addition, it is shown that the demonstrated spatial resolution is not the ultimate limit, and a finer spatial resolution can be achieved by simply reducing the probe pulse duration. Another Brillouin distributed temperature and stress sensor is proposed based on the DBG principle. Here DBG is generated by modulating the phases of a continuous Brillouin pump and probe waves by common PRBS with unipolar encoding and modulation speeds faster than phonon lifetime. By choosing the proper parameters of PRBS, only one localized and permanent dynamic Brillouin grating is placed inside the sensing fiber. Distributed measurements of temperature or strain are accomplished by scanning the position of the DBG inside the fiber and determining the Brillouin resonance condition at each position. Using this technique, a random access sensor with 1 cm spatial resolution is demonstrated over a 40 m standard single mode fiber. In the proposed scheme the spatial resolution can be easily changed by changing the bit duration of the PRBS, while the measurement range is controlled by the length of the PRBS sequence

Journal of Telecommunications and Information Technology, 2000, nr 1,2

kwartalni

Application of advanced on-board processing concepts to future satellite communications systems

An initial definition of on-board processing requirements for an advanced satellite communications system to service domestic markets in the 1990's is presented. An exemplar system architecture with both RF on-board switching and demodulation/remodulation baseband processing was used to identify important issues related to system implementation, cost, and technology development

NASA patent abstracts bibliography: A continuing bibliography. Section 2: Indexes (supplement 45)

A subject index is provided for over 5600 patents and patent applications for the period May 1969 through June 1994. Additional indexes list personal authors, corporate authors, contract numbers, NASA case numbers, U.S. patent class numbers, U.S. patent numbers, and NASA accession numbers

NASA patent abstracts bibliography: A continuing bibliography. Section 2: Indexes (supplement 43)

A subject index is provided for over 5400 patents and patent applications for the period May 1969 through June 1993. Additional indexes list personal authors, corporate authors, contract numbers, NASA case numbers, U.S. patent class numbers, U.S. patent numbers, and NASA accession numbers

NASA patent abstracts bibliography: A continuing bibliography. Section 2: Indexes (supplement 42)

A subject index is provided for over 4900 patents and patent applications for the period May 1969 through December 1992. Additional indexes list personal authors, corporate authors, contract numbers, NASA case numbers, U.S. patent class numbers, U.S. patent numbers, and NASA accession numbers