Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references.The demand for bandwidth in worldwide data networks continues to increase due to growing Internet use and high-bandwidth applications such as video. All-optical signal processing is one promising technique for providing the necessary capacity and offers payload transparency, power consumption which scales efficiently with increasing bit rates, reduced processing latency, and ultrafast performance. In this thesis, we focus on using semiconductor optical amplifier-based logic gates to address both routing and regeneration needs in ultrafast data networks. To address routing needs, we demonstrate a scalable, multi-packet all-optical header processing unit operating at a line rate of 40 Gb/s. For this experiment, we used the ultrafast nonlinear interferometer (UNI) gate, a discrete optical logic gate which has been demonstrated at speeds of 100 Gb/s for bit-wise switching. However, for all-optical switching to become a reality, integration is necessary to significantly reduce the cost of manufacturing, installation, and operation. One promising integrated all-optical logic gate is the semiconductor optical amplifier Mach-Zehnder interferometer (SOA-MZI). This gate has previously been demonstrated capable of up to 80 Gb/s bit-wise switching operation. To enable simple installation and operation of this gate, we developed a performance optimization method which can quickly and accurately pinpoint the optimal operating point of the switch. This eliminates the need for a time-intensive search over a large parameter space and significantly simplifies the operation of the switch. With this method, we demonstrate the ability of a single SOA-MZI logic gate to regenerate ultrafast pulses over 100 passes and 10,000 km in a regenerative loop. Ultimately, all-optical logic gates must be integrated on a single low-cost platform and demonstrated in cascaded, multi-gate operation for increased functionality.(cont.) This requires low-loss monolithic integration. Our approach to this involves an asymmetric twin waveguide (ATG) design. This design also has the potential for high-yields as a result of a high tolerance for fabrication errors. We present our characterization results of ATG waveguides and proposals for future improvements.by Jade P. Wang.Ph.D