The effects of surface modifications of multiwalled carbon nanotubes on their dispersibility in different solvents and poly(ether ether ketone)

The effects of surface modifications of multi-walled carbon nanotubes (MWCNTs) on their dispersibility in different solvents and poly (ether ether ketone) (PEEK) have been studied. MWCNTs were treated by mixed acids to obtain acid-functionalized MWCNTs. The acid-functionalized MWCNTs were modified with different chemical agents separately, such as 1,6-diaminohexane, hexadecyl trimethyl ammonium bromide, silane coupling agent 3-aminopropyltriethoxysilane, anhydrous sulfanilic acid and ethanolamine. MWCNT/PEEK composite films were fabricated in order to explore systematically the dispersibility of differently modified MWCNTs PEEK as well as in different solvents. The morphology and structures of MWCNTs and the compatibility between MWCNTs and PEEK have been investigated. It was observed that the MWCNTs modified with anhydrous sulfanilic acid have an excellent dispersion in the PEEK grafted by sulfonic acid groups and that the MWCNTs modified with ethanolamine are also dispersed well in pure PEEK. The results herein provide useful insights into the development of MWCNT/PEEK composites for a wide variety of applications.Peer reviewe

Improved mechanical and electrical properties in electrospun polyimide/multiwalled carbon nanotubes nanofibrous composites

Highly aligned polyimide (PI) and PI/multi-walled carbon nanotubes (PI/MWCNTs) nanofibrous composites by incorporating poly(ethylene oxide) as the dispersing medium were fabricated using electrospinning technique. The morphology, mechanical, and electrical properties of the electrospun nanofibrous composites were investigated. Scanning electron microscope showed that the functionalized MWCNTs (f-MWCNTs) were well dispersed and oriented along the nanofiber axis. Analysis of electrical properties indicated a remarkable improvement on the alternating current conductivity by introduction of the aligned f-MWCNTs. Besides, with addition of 3 vol.% f-MWCNTs, the obvious enhancement of tensile modulus and strength was achieved. Thus, the electrospun PI/MWCNTs nanofibrous composites have great potential applications in multifunctional engineering materials

Biocompatible polymer-assisted dispersion of multi walled carbon nanotubes in water, application to the investigation of their ecotoxicity using Xenopus laevis amphibian larvae

Carbon nanotubes (CNTs) tend to readily agglomerate and settle down in water, while the adsorption of compounds present in natural aquatic media could enhance their dispersion and stabilization in the water column. We designed a new exposure protocol to compare the biological responses of Xenopus laevis larvae exposed in semi-static conditions to size-reduced agglomerates of multi-walled carbon nanotubes (MWCNTs) in suspension in the water column and/or to larger agglomerates. Suspensions were prepared using a combination of a non-covalent functionalization with a non-toxic polymer (either carboxymethylcellulose, CMC, or gum arabic, GA) and mechanical dispersion methods (mainly ultrasonication). The ingestion of agglomerates which have settled down was incriminated in the disruption of the intestinal transit and the assimilation of nutrients, leading to acute and chronic toxicities at the highest tested concentrations. Rise in mortality, decrease in the growth rate and induction of genotoxicity from low concentrations (1 mg/L in the presence of CMC) were evidenced in presence of suspended MWCNTs in the water column. The biological responses seemed to be modulated when GA, a potential antioxidant, was used. We hypothesized that MWCNTs should interfere mainly at the surface of the gills, acting as a potential respiratory toxicant and generally inducing indirect effects

The functionalization of carbon nanotubes using a batch oscillatory flow reactor

This paper describes an efficient method for the functionalizing of multi-walled carbon nanotubes (MWCNT) using oscillatory flow mixing (OFM). A 3. l batch oscillatory flow reactor (OFR) was designed and constructed for pilot scale functionalization of MWCNT in order to potentially improve their compatibility within a thermoplastic polyphenylene sulphide (PPS) matrix. The OFM batch reactor consisted of a jacketed cylindrical vessel with a vertical axial oscillator that contained a series of baffled mixing plates. MWCNTs dispersed in dimethylformamide (DMF) were introduced into the reactor and a two stage reaction for functionalizing MWCNTs with PPS compatible groups was carried out under oscillation of baffles at elevated temperatures. Fluid mixing observations in the reactor showed that MWCNTs formed a uniform dispersion of aggregated flocs before and during the functionalization reaction. On completion of the reaction and cessation of the oscillation, the aggregated flocs of MWCNT rapidly sedimented at the bottom of the reactor; hence could be collected as a concentrated mass thereby facilitating the separation of functionalized MWCNTs from the solvent. The functionalized MWCNTs were dried and then characterized by transmission electron microscopy, infrared spectroscopy as well as thermal gravimetric analysis in order to investigate the extent of MWCNT functionalization. The characterization results confirmed the effective and relatively uniform functionalization of the MWCNTs despite formation of aggregates, indicating that OFM provides a viable approach for functionalizing MWCNTs

A new potential radiosensitizer: ammonium persulfate modified WCNTs

Radiotherapy plays a very important role in cancer treatment. Radiosensitizers have been widely used to enhance the radiosensitivity of cancer cells at given radiations. Here we fabricate multi-walled carbon nanotubes with ammonium persulfate, and get very short samples with 30-50 nanometer length. Cell viability assay show that f-WCNTs induce cell death significantly. We hypothesize that free radicals originated from hydroxyl and carbonyl groups on the surface of f-WCNTs lead cell damage

Nanopores of carbon nanotubes as practical hydrogen storage media

We report on hydrogen desorption mechanisms in the nanopores of multiwalled carbon nanotubes (MWCNTs). The as-grown MWCNTs show continuous walls that do not provide sites for hydrogen storage under ambient conditions. However, after treating the nanotubes with oxygen plasma to create nanopores in the MWCNTs, we observed the appearance of a new hydrogen desorption peak in the 300–350 K range. Furthermore, the calculations of density functional theory and molecular dynamics simulations confirmed that this peak could be attributed to the hydrogen that is physically adsorbed inside nanopores whose diameter is approximately 1 nm. Thus, we demonstrated that 1 nm nanopores in MWCNTs offer a promising route to hydrogen storage media for onboard practical applications

Inhibition-based first-generation electrochemical biosensors: theoretical aspects and application to 2,4-dichlorophenoxy acetic acid detection

In this work, several theoretical aspects involved in the first-generation inhibition-based electrochemical biosensor measurements have been discussed. In particular, we have developed a theoretical-methodological approach for the characterization of the kinetic interaction between alkaline phosphatase (AlP) and 2,4- dichlorophenoxy acetic acid (2,4-D) as representative inhibitor studied by means of cyclic voltammetry and amperometry. Based on these findings, a biosensor for the fast, simple, and inexpensive determination of 2,4-D has been developed. The enzyme has been immobilized on screen-printed electrodes (SPEs). To optimize the biosensor performances, several carbon-based SPEs, namely graphite (G), graphene (GP), and multiwalled carbon nanotubes (MWCNTs), have been evaluated. AlP was immobilized on the electrode surface by means of polyvinyl alcohol with styryl-pyridinium groups (PVA-SbQ) as cross-linking agent. In the presence of ascorbate 2-phosphate (A2P) as substrate, the herbicide has been determined, thanks to its inhibition activity towards the enzyme catalyzing the oxidation of A2P to ascorbic acid (AA). Under optimum experimental conditions, the best performance in terms of catalytic efficiency has been demonstrated by MWCNTs SPE-based biosensor. The inhibition biosensor shows a linearity range towards 2,4-D within 2.1–110 ppb, a LOD of 1 ppb, and acceptable repeatability and stability. This analysis method was applied to fortified lake water samples with recoveries above 90 %. The low cost of this device and its good analytical performances suggest its application for the screening and monitoring of 2,4-D in real matrices

Atomic Layer Deposition-Based Synthesis of Photoactive TiO2 Nanoparticle Chains by Using Carbon Nanotubes as Sacrificial Templates

Highly ordered and self supported anatase TiO2 nanoparticle chains were fabricated by calcining conformally TiO2 coated multi-walled carbon nanotubes (MWCNTs). During annealing, the thin tubular TiO2 coating that was deposited onto the MWCNTs by atomic layer deposition (ALD) was transformed into chains of TiO2 nanoparticles (~12 nm diameter) with an ultrahigh surface area (137 cm2 per cm2 of substrate), while at the same time the carbon from the MWCNTs was removed. Photocatalytic tests on the degradation of acetaldehyde proved that these forests of TiO2 nanoparticle chains are highly photo active under UV light because of their well crystallized anatase phase