Performance analysis of an efficient montgomery multiplier using 7nm FinFET and junctionless FinFET

The digital multipliers are the assertive sources of power exhaustion in the modern digital systems. To perform most efficient arithmetic based calculations, Montgomery multiplication can be one of the best alternatives for other conventional methods in digital architecture as high-speed multipliers are desired for its remarkable performance. The main drawback of the digital multipliers is that power exhaustion is very high when compared to the other elements of the digital circuit. Shift register is the one of the most important component in a digital multiplier which consumes comparatively higher power than the other components. Shift registers contains a series of D-flip flops to store the digital data. In order to obtain a notable improvement in terms of power consumption at the chip level, the flip-flop can be modified to achieve the reduction of average power in the multiplier. The Fin-Field Effect Transistor (FinFET) is a promising candidate to overcome fundamental limitations of its Silicon based alternative MOSFET. However, there seems to be an increase in leakage power and delay. The Junctionless FinFET with uniform doping in the channel proves to offer a better performance in terms of overall speed, power consumption and power delay product. The architecture has been designed in 7nm FinFET and JL-FinFET in Synopsys HSpice and Silvaco TCAD. The results of the Montgomery Multiplier affirms that the overall energy is improved by 55% and speed of the device by 35% as compared to the existing Montgomery Multiplier

Low Power Design Techniques for Digital Logic Circuits.

With the rapid increase in the density and the size of chips and systems, area and power dissipationbecome critical concern in Very Large Scale Integrated (VLSI) circuit design. Low powerdesign techniques are essential for today's VLSI industry. The history of symbolic logic and sometypical techniques for finite state machine (FSM) logic synthesis are reviewed.The state assignment is used to optimize area and power dissipation for FSMs. Two costfunctions, targeting area and power, are presented. The Genetic Algorithm (GA) is used to searchfor a good state assignment to minimize the cost functions. The algorithm has been implementedin C. The program can produce better results than NOVA, which is integrated into SIS by DCBerkeley, and other publications both in area and power tested by MCNC benchmarks.Flip-flops are the core components of FSMs. The reduction of power dissipation from flip-flopscan save power for digital systems significantly. Three new kinds of flip-flops, called differentialCMOS single edge-triggered flip-flop with clock gating, double edge-triggered and multiple valuedflip-flops employing multiple valued clocks, are proposed. All circuits are simulated using PSpice.Most researchers have focused on developing low-power techniques in AND/OR or NAND& NOR based circuits. The low power techniques for AND /XOR based circuits are still intheir early stage of development. To implement a complex function involving many inputs,a form of decomposition into smaller subfunctions is required such that the subfunctions fitinto the primitive elements to be used in the implementation. Best polarity based XOR gatedecomposition technique has been developed, which targets low power using Huffman algorithm.Compared to the published results, the proposed method shows considerable improvement inpower dissipation. Further, Boolean functions can be expressed by Fixed Polarity Reed-Muller(FPRM) forms. Based on polarity transformation, an algorithm is developed and implementedin C language which can find the best polarity for power and area optimization. Benchmarkexamples of up to 21 inputs run on a personal computer are given

Power Reductions with Energy Recovery Using Resonant Topologies

The problem of power densities in system-on-chips (SoCs) and processors has become more exacerbated recently, resulting in high cooling costs and reliability issues. One of the largest components of power consumption is the low skew clock distribution network (CDN), driving large load capacitance. This can consume as much as 70% of the total dynamic power that is lost as heat, needing elaborate sensing and cooling mechanisms. To mitigate this, resonant clocking has been utilized in several applications over the past decade. An improved energy recovering reconfigurable generalized series resonance (GSR) solution with all the critical support circuitry is developed in this work. This LC resonant clock driver is shown to save about 50% driver power (\u3e40% overall), on a 22nm process node and has 50% less skew than a non-resonant driver at 2GHz. It can operate down to 0.2GHz to support other energy savings techniques like dynamic voltage and frequency scaling (DVFS). As an example, GSR can be configured for the simpler pulse series resonance (PSR) operation to enable further power saving for double data rate (DDR) applications, by using de-skewing latches instead of flip-flop banks. A PSR based subsystem for 40% savings in clocking power with 40% driver active area reduction xii is demonstrated. This new resonant driver generates tracking pulses at each transition of clock for dual edge operation across DVFS. PSR clocking is designed to drive explicit-pulsed latches with negative setup time. Simulations using 45nm IBM/PTM device and interconnect technology models, clocking 1024 flip-flops show the reductions, compared to non-resonant clocking. DVFS range from 2GHz/1.3V to 200MHz/0.5V is obtained. The PSR frequency is set \u3e3× the clock rate, needing only 1/10th the inductance of prior-art LC resonance schemes. The skew reductions are achieved without needing to increase the interconnect widths owing to negative set-up times. Applications in data circuits are shown as well with a 90nm example. Parallel resonant and split-driver non-resonant configurations as well are derived from GSR. Tradeoffs in timing performance versus power, based on theoretical analysis, are compared for the first time and verified. This enables synthesis of an optimal topology for a given application from the GSR

Radiation Hardened by Design Methodologies for Soft-Error Mitigated Digital Architectures

abstract: Digital architectures for data encryption, processing, clock synthesis, data transfer, etc. are susceptible to radiation induced soft errors due to charge collection in complementary metal oxide semiconductor (CMOS) integrated circuits (ICs). Radiation hardening by design (RHBD) techniques such as double modular redundancy (DMR) and triple modular redundancy (TMR) are used for error detection and correction respectively in such architectures. Multiple node charge collection (MNCC) causes domain crossing errors (DCE) which can render the redundancy ineffectual. This dissertation describes techniques to ensure DCE mitigation with statistical confidence for various designs. Both sequential and combinatorial logic are separated using these custom and computer aided design (CAD) methodologies. Radiation vulnerability and design overhead are studied on VLSI sub-systems including an advanced encryption standard (AES) which is DCE mitigated using module level coarse separation on a 90-nm process with 99.999% DCE mitigation. A radiation hardened microprocessor (HERMES2) is implemented in both 90-nm and 55-nm technologies with an interleaved separation methodology with 99.99% DCE mitigation while achieving 4.9% increased cell density, 28.5 % reduced routing and 5.6% reduced power dissipation over the module fences implementation. A DMR register-file (RF) is implemented in 55 nm process and used in the HERMES2 microprocessor. The RF array custom design and the decoders APR designed are explored with a focus on design cycle time. Quality of results (QOR) is studied from power, performance, area and reliability (PPAR) perspective to ascertain the improvement over other design techniques. A radiation hardened all-digital multiplying pulsed digital delay line (DDL) is designed for double data rate (DDR2/3) applications for data eye centering during high speed off-chip data transfer. The effect of noise, radiation particle strikes and statistical variation on the designed DDL are studied in detail. The design achieves the best in class 22.4 ps peak-to-peak jitter, 100-850 MHz range at 14 pJ/cycle energy consumption. Vulnerability of the non-hardened design is characterized and portions of the redundant DDL are separated in custom and auto-place and route (APR). Thus, a range of designs for mission critical applications are implemented using methodologies proposed in this work and their potential PPAR benefits explored in detail.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

The Design of a single chip 8x8 ATM switch in 0.5 micrometers CMOS VLSI

This thesis illustrates the design of a single chip Asynchronous Transfer Mode (ATM) protocol switch using Very Large Scale Integration (VLSI). The ATM protocol is the data communications protocol used in the implementation of the Broadband Integrated Services Digital Network (B-ISDN), A number of switch architecture are first studied and a new architecture is developed based on optimizing performance and practicality of implementation in VLSI. A fully interconnected switch architecture is implemented by permanently connecting every input port to all the output ports. An output buffering scheme is used to handle cells that cannot be routed right away. This new architecture is caned the High Performance (HiPer) Switch Architecture. The performance of the architecture is simulated using a C++ model. Simulation results for a randomly distributed traffic pattern with a 90% probability of cells arriving in a time slot produces a Cell Loss Ratio of 1.Ox 10^-8 with output buffers that can hold 64 cells. The device is then modeled in VHDL to verify its functionality. Finally the layout of an 8x8 switch is produced using a 0.5 micrometer CMOS VLSI process and simulations of that circuit show that a peak throughput of 200 Mbps per output port can be achieve

Design-for-delay-testability techniques for high-speed digital circuits

The importance of delay faults is enhanced by the ever increasing clock rates and decreasing geometry sizes of nowadays' circuits. This thesis focuses on the development of Design-for-Delay-Testability (DfDT) techniques for high-speed circuits and embedded cores. The rising costs of IC testing and in particular the costs of Automatic Test Equipment are major concerns for the semiconductor industry. To reverse the trend of rising testing costs, DfDT is\ud getting more and more important

A time-based energy-efficient analog-to-digital converter

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (leaves 123-129).Dual-slope converters use time to perform analog-to-digital conversion but require 2N+1 clock cycles to achieve N bits of precision. We describe a novel algorithm that also uses time to perform analog-to-digital conversion but requires 5N clock cycles to achieve N bits of precision via a successive sub-ranging technique. The algorithm requires one asynchronous comparator, two capacitors, one current source, and a state machine. Amplification of two is achieved without the use of an explicit amplifier by simply doing things twice in time. The use of alternating Voltage-to-Time and Time-to-Voltage conversions provides natural error cancellation of comparator offset and delay, 1/f noise, and switching charge-injection. The use of few components and an effcient mechanism for amplification and error cancellation allow for energy-effcient operation: In a 0.35 [mu]m implementation, we were able to achieve 12 bits of DNL limited precision or 11 bits of thermal noise-limited precision at a sampling frequency of 31.25kHz with 75 [mu] W of total analog and digital power consumption. These numbers yield a thermal noise-limited energy-efficiency of 1.17pJ per quantization level making it one of the most energy-effcient converters to date in the 10 to 12 bit precision range.(cont.) This converter could be useful in low-power hearing aids after analog gain control has been performed on a microphone front-end. An 8 bit audio version of our converter in a 0.18 [mu] m process consumes 960nW and yields an energy-efficiency of 0.12pJ per quantization level, perhaps the lowest ever reported. This converter may be useful in biomedical and sensor-network applications where energy-efficiency is paramount. Our algorithm has inherent advantages in time-to-digital conversion. It can be generalized to easily digitize power-law functions of its input, and it can be used in an interleaved architecture if higher speed is desired.by Heemin Yi Yang.Ph.D

NASA Space Engineering Research Center Symposium on VLSI Design

The NASA Space Engineering Research Center (SERC) is proud to offer, at its second symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories and the electronics industry. These featured speakers share insights into next generation advances that will serve as a basis for future VLSI design. Questions of reliability in the space environment along with new directions in CAD and design are addressed by the featured speakers