73 research outputs found
Radiation safety based on the sky shine effect in reactor
In the reactor operation, neutrons and gamma rays are the most dominant radiation.
As protection, lead and concrete shields are built around the reactor. However, the radiation
can penetrate the water shielding inside the reactor pool. This incident leads to the occurrence
of sky shine where a physical phenomenon of nuclear radiation sources was transmitted
panoramic that extends to the environment. The effect of this phenomenon is caused by the
fallout radiation into the surrounding area which causes the radiation dose to increase. High
doses of exposure cause a person to have stochastic effects or deterministic effects. Therefore,
this study was conducted to measure the radiation dose from sky shine effect that scattered
around the reactor at different distances and different height above the reactor platform. In this
paper, the analysis of the radiation dose of sky shine effect was measured using the
experimental metho
Recommended from our members
Network-on-Chip Synchronization
Technology scaling has enabled the number of cores within a System on Chip (SoC) to increase significantly. Globally Asynchronous Locally Synchronous (GALS) systems using Dynamic Voltage and Frequency Scaling (DVFS) operate each of these cores on distinct and dynamic clock domains. The main communication method between these cores is increasingly more likely to be a Network-on-Chip (NoC). Typically, the interfaces between these clock domains experience multi-cycle synchronization latencies due to their use of “brute-force” synchronizers. This dissertation aims to improve the performance of NoCs and thereby SoCs as a whole by reducing this synchronization latency.
First, a survey of NoC improvement techniques is presented. One such improvement technique: a multi-layer NoC, has been successfully simulated. Given how one of the most commonly used techniques is DVFS, a thorough analysis and simulation of brute-force synchronizer circuits in both current and future process technologies is presented. Unfortunately, a multi-cycle latency is unavoidable when using brute-force synchronizers, so predictive synchronizers which require only a single cycle of latency have been proposed.
To demonstrate the impact of these predictive synchronizer circuits at a high level, multi-core system simulations incorporating these circuits have been completed. Multiple forms of GALS NoC configurations have been simulated, including multi-synchronous, NoC-synchronous, and single-synchronizer. Speedup on the SPLASH benchmark suite was measured to directly quantify the performance benefit of predictive synchronizers in a full system. Additionally, Mean Time Between Failures (MTBF) has been calculated for each NoC synchronizer configuration to determine the reliability benefit possible when using predictive synchronizers
Exploration and Design of Power-Efficient Networked Many-Core Systems
Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level.
From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques.
From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented.
Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast
DVFS using clock scheduling for Multicore Systems-on-Chip and Networks-on-Chip
A modern System-on-Chip (SoC) contains processor cores, application-specific process-
ing elements, memory, peripherals, all connected with a high-bandwidth and low-latency
Network-on-Chip (NoC). The downside of such very high level of integration and con-
nectivity is the high power consumption. In CMOS technology this is made of a dynamic
and a static component. To reduce the dynamic component, Dynamic voltage and Fre-
quency Scaling (DVFS) has been adopted. Although DVFS is very effective chip-wide,
the power optimization of complex SoCs calls for a finer grain application of DVFS.
Ideally all the main components of an SoC should be provided with a DVFS controller.
An SoC with a DVFS controller per component with individual DC-DC converters and
PLL/DLL circuits cannot scale in size to hundreds of components, which are in the
research agenda. We present an alternative that will permit such scaling. It is possible
to achieve results close to an optimum DVFS by hopping between few voltage levels
and by an innovative application of clock-gating that we term as clock scheduling. We
obtain an effective clock frequency by periodically killing some clock cycles of a master
clock. We can apply voltage scaling for some of the periodic clock schedules which yield
effective clock 1/2, 1/3, . . . By dithering between few voltages we obtain results close to
an ideal DVFS system in simple pipelined circuits and in a complex example, a NoC’s
switch.
Again in the context of a NoC, we show how clock scheduling and voltage scaling can
be automatically determined by means of a proportional-integral loop controller that
keeps track of the network load. We describe in detail its implementation and all the
circuit-level issues that we found. For a single switch, result shows an advantage of up
to 2X over simple frequency scaling without voltage scaling.
By providing each NoC’s switch with our simple DVFS controller, power saving at
network level can be significantly more than what a a global DVFS controller can get.
In a realistic scenario represented by network traces generated by video applications
(MPEG, PIP, MWD, VoPD), we obtain an average power saving of 33%.
To reduce static power, the Power-Gating (PG) technique is used and consists in switching-
off power supply of unused blocks via pMOS headers or nMOS footers in series with such
blocks. Even though research has been done in this field, the application of PG to NoCs
has not been fully investigated. We show that it is possible to apply PG to the input
buffers of a NoC switch. Their leakage power contributes about 40-50% of total NoC
power, hence reducing such contribution is worthwhile. We partitioned buffers in banks
and apply PG only to inactive banks. With our technique, it is possible to save about
40% in leakage power, without impact on performance
Recommended from our members
Design and performance optimization of asynchronous networks-on-chip
As digital systems continue to grow in complexity, the design of conventional synchronous systems is facing unprecedented challenges. The number of transistors on individual chips is already in the multi-billion range, and a greatly increasing number of components are being integrated onto a single chip. As a consequence, modern digital designs are under strong time-to-market pressure, and there is a critical need for composable design approaches for large complex systems.
In the past two decades, networks-on-chip (NoC’s) have been a highly active research area. In a NoC-based system, functional blocks are first designed individually and may run at different clock rates. These modules are then connected through a structured network for on-chip global communication. However, due to the rigidity of centrally-clocked NoC’s, there have been bottlenecks of system scalability, energy and performance, which cannot be easily solved with synchronous approaches. As a result, there has been significant recent interest in combing the notion of asynchrony with NoC designs. Since the NoC approach inherently separates the communication infrastructure, and its timing, from computational elements, it is a natural match for an asynchronous paradigm. Asynchronous NoC’s, therefore, enable a modular and extensible system composition for an ‘object-orient’ design style.
The thesis aims to significantly advance the state-of-art and viability of asynchronous and globally-asynchronous locally-synchronous (GALS) networks-on-chip, to enable high-performance and low-energy systems. The proposed asynchronous NoC’s are nearly entirely based on standard cells, which eases their integration into industrial design flows. The contributions are instantiated in three different directions.
First, practical acceleration techniques are proposed for optimizing the system latency, in order to break through the latency bottleneck in the memory interfaces of many on-chip parallel processors. Novel asynchronous network protocols are proposed, along with concrete NoC designs. A new concept, called ‘monitoring network’, is introduced. Monitoring networks are lightweight shadow networks used for fast-forwarding anticipated traffic information, ahead of the actual packet traffic. The routers are therefore allowed to initiate and perform arbitration and channel allocation in advance. The technique is successfully applied to two topologies which belong to two different categories – a variant mesh-of-trees (MoT) structure and a 2D-mesh topology. Considerable and stable latency improvements are observed across a wide range of traffic patterns, along with moderate throughput gains.
Second, for the first time, a high-performance and low-power asynchronous NoC router is compared directly to a leading commercial synchronous counterpart in an advanced industrial technology. The asynchronous router design shows significant performance improvements, as well as area and power savings. The proposed asynchronous router integrates several advanced techniques, including a low-latency circular FIFO for buffer design, and a novel end-to-end credit-based virtual channel (VC) flow control. In addition, a semi-automated design flow is created, which uses portions of a standard synchronous tool flow.
Finally, a high-performance multi-resource asynchronous arbiter design is developed. This small but important component can be directly used in existing asynchronous NoC’s for performance optimization. In addition, this standalone design promises use in opening up new NoC directions, as well as for general use in parallel systems. In the proposed arbiter design, the allocation of a resource to a client is divided into several steps. Multiple successive client-resource pairs can be selected rapidly in pipelined sequence, and the completion of the assignments can overlap in parallel.
In sum, the thesis provides a set of advanced design solutions for performance optimization of asynchronous and GALS networks-on-chip. These solutions are at different levels, from network protocols, down to router- and component-level optimizations, which can be directly applied to existing basic asynchronous NoC designs to provide a leap in performance improvement
Dynamic Voltage and Frequency Scaling for Wireless Network-on-Chip
Previously, research and design of Network-on-Chip (NoC) paradigms where mainly focused on improving the performance of the interconnection networks. With emerging wide range of low-power applications and energy constrained high-performance applications, it is highly desirable to have NoCs that are highly energy efficient without incurring performance penalty. In the design of high-performance massive multi-core chips, power and heat have become dominant constrains. Increased power consumption can raise chip temperature, which in turn can decrease chip reliability and performance and increase cooling costs.
It was proven that Small-world Wireless Network-on-Chip (SWNoC) architecture which replaces multi-hop wire-line path in a NoC by high-bandwidth single hop long range wireless links, reduces the overall energy dissipation when compared to wire-line mesh-based NoC architecture. However, the overall energy dissipation of the wireless NoC is still dominated by wire-line links and switches (buffers).
Dynamic Voltage Scaling is an efficient technique for significant power savings in microprocessors. It has been proposed and deployed in modern microprocessors by exploiting the variance in processor utilization. On a Network-on-Chip paradigm, it is more likely that the wire-line links and buffers are not always fully utilized even for different applications. Hence, by exploiting these characteristics of the links and buffers over different traffic, DVFS technique can be incorporated on these switches and wire-line links for huge power savings.
In this thesis, a history based DVFS mechanism is proposed. This mechanism uses the past utilization of the wire-line links & buffers to predict the future traffic and accordingly tune the voltage and frequency for the links and buffers dynamically for each time window. This mechanism dynamically minimizes the power consumption while substantially maintaining a high performance over the system. Performance analysis on these DVFS enabled Wireless NoC shows that, the overall energy dissipation is improved by around 40% when compared Small-world Wireless NoCs
- …