Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

An FPGA Architecture and CAD Flow Supporting Dynamically Controlled Power Gating

© 2015 IEEE.Leakage power is an important component of the total power consumption in field-programmable gate arrays (FPGAs) built using 90-nm and smaller technology nodes. Power gating was shown to be effective at reducing the leakage power. Previous techniques focus on turning OFF unused FPGA resources at configuration time; the benefit of this approach depends on resource utilization. In this paper, we present an FPGA architecture that enables dynamically controlled power gating, in which FPGA resources can be selectively powered down at run-time. This could lead to significant overall energy savings for applications having modules with long idle times. We also present a CAD flow that can be used to map applications to the proposed architecture. We study the area and power tradeoffs by varying the different FPGA architecture parameters and power gating granularity. The proposed CAD flow is used to map a set of benchmark circuits that have multiple power-gated modules to the proposed architecture. Power savings of up to 83% are achievable for these circuits. Finally, we study a control system of a robot that is used in endoscopy. Using the proposed architecture combined with clock gating results in up to 19% energy savings in this application

A study on coarse-grained placement and routing for low-power FPGA architecture

制度:新 ; 報告番号:甲3603号 ; 学位の種類:博士(工学) ; 授与年月日:2012/3/15 ; 早大学位記番号:新595

Modelling and Automated Implementation of Optimal Power Saving Strategies in Coarse-Grained Reconfigurable Architectures

This paper focuses on how to efficiently reduce power consumption in coarse-grained reconfigurable designs, to allow their effective adoption in heterogeneous architectures supporting and accelerating complex and highly variable multifunctional applications. We propose a design flow for this kind of architectures that, besides their automatic customization, is also capable of determining their optimal power management support. Power and clock gating implementation costs are estimated in advance, before their physical implementation, on the basis of the functional, technological, and architectural parameters of the baseline design. Experimental results, on 90 and 45 nm CMOS technologies, demonstrate that the proposed approach guides the designer towards optimal implementation

Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

Ultra-Low Leakage, Energy-Efficient Digital Integrated Circuit and System Design

The advances of the complementary metal-oxide-semiconductor (CMOS) technology manufacturing and design over the years have enabled a diverse range of applications across the power consumption, performance, and area (PPA) spectra. Many of the recent and prospective applications rely on the availability of energy-autonomous, miniaturized systems, i.e., ultra-low power (ULP) VLSI systems, which are generally characterized by extreme resource limitations. Some examples of applications are wireless sensing platforms, body-area sensor networks (BASN), biomedical and implantable devices, wearables, hearables, and monitors. Within the context of such applications, the key requirements are long lifetime and miniaturized size (sub-/millimeter-scale). In order to enable both requirements, energy-efficiency is the key metric. It allows for extended battery lifetime and operation with the energy that can be harvested from the environment, and it limits the size (volume) of the energy sources utilized to power these systems. Ultra-low voltage (ULV) operation is a key technique in which the VDD of circuits is reduced from nominal to near or below the threshold voltage of the transistor. It is a powerful knob that has been largely exploited by designers in order to achieve ultra-low power consumption and high energy-efficiency in CMOS. Existing ULP VLSI systems typically operate at a lower supply voltage thereby reducing their energy consumption by one to two orders of magnitude in order to enable the aforementioned applications. While supply voltage scaling is a promising measure for achieving low power and reducing energy consumption, it brings up several challenges. One critical issue is the leakage energy dissipated by the devices, which is magnified in portion to the total energy consumption at ULV. The reason is that, as VDD scales from nominal to near-threshold and sub-threshold, transistors become increasingly slower and they accumulate more leakage (i.e., static) power over longer cycle times. This energy waste accounts for a significant portion of the system's total energy consumption, offsets the gains provided by voltage scaling, defines the minimum energy per operation, and poses a practical limit for the system's energy-efficiency. This thesis presents selected research works on ultra-low leakage, energy-efficient digital integrated circuit design. More specifically, it describes novel and key techniques for minimizing the energy waste of idle/underutilized and always-on hardware. The main goal of such techniques is to push the envelope of energy-efficiency in energy-autonomous, miniaturized VLSI systems. Such techniques are applied to key building blocks of emerging mobile and embedded computing devices resulting in state-of-the-art energy-efficiencies

Coarse-Grained Online Monitoring of BTI Aging by Reusing Power-Gating Infrastructure

In this paper, we present a novel coarse-grained technique for monitoring online the bias temperature instability (BTI) aging of circuits by exploiting their power gating infrastructure. The proposed technique relies on monitoring the discharge time of the virtual-power-network during standby operations, the value of which depends on the threshold voltage of the CMOS devices in a power-gated design (PGD). It does not require any distributed sensors, because the virtual-power-network is already distributed in a PGD. It consists of a hardware block for measuring the discharge time concurrently with normal standby operations and a processing block for estimating the BTI aging status of the PGD according to collected measurements. Through SPICE simulation, we demonstrate that the BTI aging estimation error of the proposed technique is less than 1% and 6.2% for PGDs with static operating frequency and dynamic voltage and frequency scaling, respectively. Its area cost is also found negligible. The power gating minimum idle time (MIT) cost induced by the energy consumed for monitoring the discharge time is evaluated on two scalar machine models using either x86 or ARM instruction sets. It is found less than 1.3× and 1.45× the original power gating MIT, respectively. We validate the proposed technique through accelerated aging experiments conducted with five actual chips that contain an ARM cortex M0 processor, manufactured with a 65 nm CMOS technology

Circuits and Systems Advances in Near Threshold Computing

Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing

Mutual Impact between Clock Gating and High Level Synthesis in Reconfigurable Hardware Accelerators

With the diffusion of cyber-physical systems and internet of things, adaptivity and low power consumption became of primary importance in digital systems design. Reconfigurable heterogeneous platforms seem to be one of the most suitable choices to cope with such challenging context. However, their development and power optimization are not trivial, especially considering hardware acceleration components. On the one hand high level synthesis could simplify the design of such kind of systems, but on the other hand it can limit the positive effects of the adopted power saving techniques. In this work, the mutual impact of different high level synthesis tools and the application of the well known clock gating strategy in the development of reconfigurable accelerators is studied. The aim is to optimize a clock gating application according to the chosen high level synthesis engine and target technology (Application Specific Integrated Circuit (ASIC) or Field Programmable Gate Array (FPGA)). Different levels of application of clock gating are evaluated, including a novel multi level solution. Besides assessing the benefits and drawbacks of the clock gating application at different levels, hints for future design automation of low power reconfigurable accelerators through high level synthesis are also derived