Design and Analysis of Multiplexer based Approximate Adder for Low Power Applications

Low power consumption is crucial for error-acceptable multimedia devices, with picture compression approaches leveraging various digital processing architectures and algorithms. Humans can assemble useful information from partially inaccurate outputs in many multimedia applications. As a result, producing exact outputs is not required. The demand for an exact outcome is fading because new innovative systems are forgiving of faults. In the domain where error-tolerance is accepted, approximate computing is a new paradigm that relaxes the requirement for an accurate modeling while offering power, time, and delay benefits. Adders are an essential arithmetic module for regulating power and memory usage in digital systems. The recent implementation and use of approximate adders have been supported by trade-off characteristics such as delay, lower power consumption. This study examines the delay and power consumption of conventional and approximate adders. Also, a simple, fast, and power-efficient multiplexer-based approximate adder is proposed, and its performance outperforms the adders compared with existing adders. The proposed adder can be utilized in error-tolerant and various digital signal processing applications where exact results are not required. The proposed and existing adders are designed using EDA software for the performance calculations. With a delay of 81 pS, the proposed adder circuit reduces power consumption compared to the exact one. The experiment shows that the designed approximate adder can be used to implement circuits for image processing systems because it has a smaller delay and uses less energy

Approximate Computing in Coarse Grained Reconfigurable Architecture

Approximate computing has emerged as a new computing paradigm capable of reducing the power requirements for or accelerating some workloads. Due to cascading error and the nature of binary arithmetic, it is difficult to predict the exact effects that approximation may have on an error tolerant workload. In this work, we implemented configurable levels of approximation into a Coarse Grained Reconfigurable Architecture (CGRA) to study the effects of error tolerant algorithms on an approximate CGRA. We will use the CGRA Compilation Framework which simulates a CGRA using gem5, and we will implement the approximate hardware using multiple different approximate arithmetic modules included in Low Power Approximate Computing Library. Finally, we will perform a hardware level simulation on approximate modules to estimate the reduction in power from using approximate hardware

A Study on Efficient Designs of Approximate Arithmetic Circuits

Approximate computing is a popular field where accuracy is traded with energy. It can benefit applications such as multimedia, mobile computing and machine learning which are inherently error resilient. Error introduced in these applications to a certain degree is beyond human perception. This flexibility can be exploited to design area, delay and power efficient architectures. However, care must be taken on how approximation compromises the correctness of results. This research work aims to provide approximate hardware architectures with error metrics and design metrics analyzed and their effects in image processing applications. Firstly, we study and propose unsigned array multipliers based on probability statistics and with approximate 4-2 compressors, full adders and half adders. This work deals with a new design approach for approximation of multipliers. The partial products of the multiplier are altered to introduce varying probability terms. Logic complexity of approximation is varied for the accumulation of altered partial products based on their probability. The proposed approximation is utilized in two variants of 16-bit multipliers. Synthesis results reveal that two proposed multipliers achieve power savings of 72% and 38% respectively compared to an exact multiplier. They have better precision when compared to existing approximate multipliers. Mean relative error distance (MRED) figures are as low as 7.6% and 0.02% for the proposed approximate multipliers, which are better than the previous state-of-the-art works. Performance of the proposed multipliers is evaluated with geometric mean filtering application, where one of the proposed models achieves the highest peak signal to noise ratio (PSNR). Second, approximation is proposed for signed Booth multiplication. Approximation is introduced in partial product generation and partial product accumulation circuits. In this work, three multipliers (ABM-M1, ABM-M2, and ABM-M3) are proposed in which the modified Booth algorithm is approximated. In all three designs, approximate Booth partial product generators are designed with different variations of approximation. The approximations are performed by reducing the logic complexity of the Booth partial product generator, and the accumulation of partial products is slightly modified to improve circuit performance. Compared to the exact Booth multiplier, ABM-M1 achieves up to 15% reduction in power consumption with an MRED value of 7.9 × 10-4. ABM-M2 has power savings of up to 60% with an MRED of 1.1 × 10-1. ABM-M3 has power savings of up to 50% with an MRED of 3.4 × 10-3. Compared to existing approximate Booth multipliers, the proposed multipliers ABM-M1 and ABM-M3 achieve up to a 41% reduction in power consumption while exhibiting very similar error metrics. Image multiplication and matrix multiplication are used as case studies to illustrate the high performance of the proposed approximate multipliers. Third, distributed arithmetic based sum of products units approximation is analyzed. Sum of products units are key elements in many digital signal processing applications. Three approximate sum of products models which are based on distributed arithmetic are proposed. They are designed for different levels of accuracy. First model of approximate sum of products achieves an improvement up to 64% on area and 70% on power, when compared to conventional unit. Other two models provide an improvement of 32% and 48% on area and 54% and 58% on power, respectively, with a reduced error rate compared to the first model. Third model achieves MRED and normalized mean error distance (NMED) as low as 0.05% and 0.009%. Performance of approximate units is evaluated with a noisy image smoothing application, where the proposed models are capable of achieving higher PSNR than existing state of the art techniques. Fourth, approximation is applied in division architecture. Two approximation models are proposed for restoring divider. In the first design, approximation is performed at circuit level, where approximate divider cells are utilized in place of exact ones by simplifying the logic equations. In the second model, restoring divider is analyzed strategically and number of restoring divider cells are reduced by finding the portions of divisor and dividend with significant information. An approximation factor $p$ is used in both designs. In model 1, the design with p=8 has a 58% reduction in both area and power consumption compared to exact design, with a Q-MRED of 1.909 × 10-2 and Q-NMED of 0.449 × 10-2. The second model with an approximation factor p=4 has 54% area savings and 62% power savings compared to exact design. The proposed models are found to have better error metrics compared to existing designs, with better performance at similar error values. A change detection image processing application is used for real time assessment of proposed and existing approximate dividers and one of the models achieves a PSNR of 54.27 dB

Design of Static Segment Adder for Approximating Computing Applications

The digital VLSI design needs to attain high performance with desired reliability range. The high performance involves low power, area efficiency and high speed. This paper proposes a design of High speed energy efficient static segment adder (SSA) to enhance the overall performance based on approximation technique. Static segmentation includes both accurate and inaccurate part. The normal full adder performs accurate part and the carry select adder is used for inaccurate part. By using static segmentation the approximate computation is done. Approximate computing is a computation which generates “good enough” result rather than totally accurate result. Image processing is accomplished using SSA design. In this process 99.4% whole computational accuracy for 16 bit addition and also for 8 bit addition can be achieved

Design and Evaluation of Approximate Logarithmic Multipliers for Low Power Error-Tolerant Applications

In this work, the designs of both non-iterative and iterative approximate logarithmic multipliers (LMs) are studied to further reduce power consumption and improve performance. Non-iterative approximate LMs (ALMs) that use three inexact mantissa adders, are presented. The proposed iterative approximate logarithmic multipliers (IALMs) use a set-one adder in both mantissa adders during an iteration; they also use lower-part-or adders and approximate mirror adders for the final addition. Error analysis and simulation results are also provided; it is found that the proposed approximate LMs with an appropriate number of inexact bits achieve a higher accuracy and lower power consumption than conventional LMs using exact units. Compared with conventional LMs with exact units, the normalized mean error distance (NMED) of 16-bit approximate LMs is decreased by up to 18% and the power-delay product (PDP) has a reduction of up to 37%. The proposed approximate LMs are also compared with previous approximate multipliers; it is found that the proposed approximate LMs are best suitable for applications allowing larger errors, but requiring lower energy consumption and low power. Approximate Booth multipliers fit applications with less stringent power requirements, but also requiring smaller errors. Case studies for error-tolerant computing applications are provided

A Survey on Approximate Multiplier Designs for Energy Efficiency: From Algorithms to Circuits

Given the stringent requirements of energy efficiency for Internet-of-Things edge devices, approximate multipliers, as a basic component of many processors and accelerators, have been constantly proposed and studied for decades, especially in error-resilient applications. The computation error and energy efficiency largely depend on how and where the approximation is introduced into a design. Thus, this article aims to provide a comprehensive review of the approximation techniques in multiplier designs ranging from algorithms and architectures to circuits. We have implemented representative approximate multiplier designs in each category to understand the impact of the design techniques on accuracy and efficiency. The designs can then be effectively deployed in high-level applications, such as machine learning, to gain energy efficiency at the cost of slight accuracy loss.Comment: 38 pages, 37 figure