Error-resilient performance of Dirac video codec over packet-erasure channel

Video transmission over the wireless or wired network requires error-resilient mechanism since compressed video bitstreams are sensitive to transmission errors because of the use of predictive coding and variable length coding. This paper investigates the performance of a simple and low complexity error-resilient coding scheme which combines source and channel coding to protect compressed bitstream of wavelet-based Dirac video codec in the packet-erasure channel. By partitioning the wavelet transform coefficients of the motion-compensated residual frame into groups and independently processing each group using arithmetic and Forward Error Correction (FEC) coding, Dirac could achieves the robustness to transmission errors by giving the video quality which is gracefully decreasing over a range of packet loss rates up to 30% when compared with conventional FEC only methods. Simulation results also show that the proposed scheme using multiple partitions can achieve up to 10 dB PSNR gain over its existing un-partitioned format. This paper also investigates the error-resilient performance of the proposed scheme in comparison with H.264 over packet-erasure channel

MASCOT : metadata for advanced scalable video coding tools : final report

The goal of the MASCOT project was to develop new video coding schemes and tools that provide both an increased coding efficiency as well as extended scalability features compared to technology that was available at the beginning of the project. Towards that goal the following tools would be used: - metadata-based coding tools; - new spatiotemporal decompositions; - new prediction schemes. Although the initial goal was to develop one single codec architecture that was able to combine all new coding tools that were foreseen when the project was formulated, it became clear that this would limit the selection of the new tools. Therefore the consortium decided to develop two codec frameworks within the project, a standard hybrid DCT-based codec and a 3D wavelet-based codec, which together are able to accommodate all tools developed during the course of the project

A family of stereoscopic image compression algorithms using wavelet transforms

With the standardization of JPEG-2000, wavelet-based image and video compression technologies are gradually replacing the popular DCT-based methods. In parallel to this, recent developments in autostereoscopic display technology is now threatening to revolutionize the way in which consumers are used to enjoying the traditional 2-D display based electronic media such as television, computer and movies. However, due to the two-fold bandwidth/storage space requirement of stereoscopic imaging, an essential requirement of a stereo imaging system is efficient data compression. In this thesis, seven wavelet-based stereo image compression algorithms are proposed, to take advantage of the higher data compaction capability and better flexibility of wavelets. [Continues.

A family of stereoscopic image compression algorithms using wavelet transforms

With the standardization of JPEG-2000, wavelet-based image and video compression technologies are gradually replacing the popular DCT-based methods. In parallel to this, recent developments in autostereoscopic display technology is now threatening to revolutionize the way in which consumers are used to enjoying the traditional 2D display based electronic media such as television, computer and movies. However, due to the two-fold bandwidth/storage space requirement of stereoscopic imaging, an essential requirement of a stereo imaging system is efficient data compression. In this thesis, seven wavelet-based stereo image compression algorithms are proposed, to take advantage of the higher data compaction capability and better flexibility of wavelets. In the proposed CODEC I, block-based disparity estimation/compensation (DE/DC) is performed in pixel domain. However, this results in an inefficiency when DWT is applied on the whole predictive error image that results from the DE process. This is because of the existence of artificial block boundaries between error blocks in the predictive error image. To overcome this problem, in the remaining proposed CODECs, DE/DC is performed in the wavelet domain. Due to the multiresolution nature of the wavelet domain, two methods of disparity estimation and compensation have been proposed. The first method is performing DEJDC in each subband of the lowest/coarsest resolution level and then propagating the disparity vectors obtained to the corresponding subbands of higher/finer resolution. Note that DE is not performed in every subband due to the high overhead bits that could be required for the coding of disparity vectors of all subbands. This method is being used in CODEC II. In the second method, DEJDC is performed m the wavelet-block domain. This enables disparity estimation to be performed m all subbands simultaneously without increasing the overhead bits required for the coding disparity vectors. This method is used by CODEC III. However, performing disparity estimation/compensation in all subbands would result in a significant improvement of CODEC III. To further improve the performance of CODEC ill, pioneering wavelet-block search technique is implemented in CODEC IV. The pioneering wavelet-block search technique enables the right/predicted image to be reconstructed at the decoder end without the need of transmitting the disparity vectors. In proposed CODEC V, pioneering block search is performed in all subbands of DWT decomposition which results in an improvement of its performance. Further, the CODEC IV and V are able to perform at very low bit rates(< 0.15 bpp). In CODEC VI and CODEC VII, Overlapped Block Disparity Compensation (OBDC) is used with & without the need of coding disparity vector. Our experiment results showed that no significant coding gains could be obtained for these CODECs over CODEC IV & V. All proposed CODECs m this thesis are wavelet-based stereo image coding algorithms that maximise the flexibility and benefits offered by wavelet transform technology when applied to stereo imaging. In addition the use of a baseline-JPEG coding architecture would enable the easy adaptation of the proposed algorithms within systems originally built for DCT-based coding. This is an important feature that would be useful during an era where DCT-based technology is only slowly being phased out to give way for DWT based compression technology. In addition, this thesis proposed a stereo image coding algorithm that uses JPEG-2000 technology as the basic compression engine. The proposed CODEC, named RASTER is a rate scalable stereo image CODEC that has a unique ability to preserve the image quality at binocular depth boundaries, which is an important requirement in the design of stereo image CODEC. The experimental results have shown that the proposed CODEC is able to achieve PSNR gains of up to 3.7 dB as compared to directly transmitting the right frame using JPEG-2000

Research and developments of Dirac video codec

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video data over the bandwidth limited erroneous channels is another important issue. To enable a video codec for broadcasting application, it is required to implement the corresponding coding tools (e.g. error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and hence their specifications are not defined in the standard. In Dirac as well, the original codec is optimized for storage purpose only and so, several non-normative part of the encoding tools are still required in order to be able to use in other types of application. Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient coding method used here is a simple and low complex coding scheme which provides the error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet erasure wired network. The scheme combines source and channel coding approach where error-resilient source coding is achieved by data partitioning in the wavelet transformed domain and channel coding is achieved through the application of either Rate-Compatible Punctured Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the Internet broadcasting application. But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the 2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the optimum QF of the current encoding frame for a given target bitrate, R. In some applications like video conferencing, real-time encoding and decoding with minimum delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder is the most time consuming stage. So, reducing the complexity of the motion estimation stage will certainly give one step closer to the real-time application. So, as a partial contribution toward realtime application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of motion estimation. The same strategy was implemented in both Dirac and H.264 in order to investigate its performance on different codecs. Together with this fast ME strategy, a method which is called partial cost function calculation in order to further reduce down the computational load of the cost function calculation was presented. The calculation is based upon the pre-defined set of patterns which were chosen in such a way that they have as much maximum coverage as possible over the whole block. In summary, this research work has contributed to the error-resilient transmission of compressed bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this, the final phase of the research has partially contributed toward the real-time application of the Dirac video codec by implementing a fast motion estimation strategy together with partial cost function calculation idea.BBC R&D and Brunel University

Overview of Image Processing and Various Compression Schemes

Image processing is key research among researchers. Compression of images are required when need of transmission or storage of images. Demand of multimedia growth, contributes to insufficient bandwidth of network and memory storage device. Advance imaging requires capacity of extensive amounts of digitized information. Therefore data compression is more required for reducing data redundancy to save more hardware space and transmission bandwidth. Various techniques are given for image compression. Some of which are discussed in this paper