Integrating secure mobile P2P systems and Wireless Sensor Networks

Aquesta tesi tracta de les diferents limitacions trobades a WSN per a habilitar-ne el desplegament en nous escenaris i facilitar la difusió de la informació obtinguda. A un nivell baix, ens centrem en el consum d'energia, mentre que, a un nivell més alt, ens focalitzem en la difusió i la seguretat de la informació. Reduïm el consum d'una mote individual en xarxes amb patrons de trànsit dinàmic mitjançant la definició d'una funció de planificació basada en el conegut controlador PID i allarguem la vida d'una WSN globalment distribuint equitativament el consum energètic de totes les motes, disminuint el nombre d'intervencions necessàries per a canviar bateries i el cost associat. Per tal d'afavorir la difusió de la informació provinent d'una WSN, hem proposat jxSensor, una capa d'integració entre les WSN i el conegut sistema P2P JXTA. Com que tractem informació sensible, hem proposat una capa d'anonimat a JXTA i un mecanisme d'autenticació lleuger per a la seva versió mòbil.Esta tesis trata las diferentes limitaciones encontradas en WSN para habilitar su despliegue en nuevos escenarios, así como facilitar la diseminación de la información obtenida. A bajo nivel, nos centramos en el consumo de energía, mientras que, a un nivel más alto, nos focalizamos en la diseminación y seguridad de la información. Reducimos el consumo de una mota individual en redes con patrones de tráfico dinámico mediante la definición de una función de planificación basada en el conocido controlador PID y alargamos la vida de una WSN globalmente distribuyendo equitativamente el consumo energético de todas las motas, disminuyendo el número de intervenciones requeridas para cambiar baterías y su coste asociado. Para favorecer la diseminación de la información procedente de una WSN hemos propuesto jxSensor, una capa de integración entre las WSN y el conocido sistema P2P JXTA. Como estamos tratando con información sensible, hemos propuesto una capa de anonimato en JXTA y un mecanismo de autenticación ligero para su versión móvil.This thesis addresses different limitations found in WSNs in order to enable their deployment in new scenarios as well as to make it easier to disseminate the gathered information. At a lower level, we concentrate on energy consumption while, at a higher level, we focus on the dissemination and security of information. The consumption of an individual mote in networks with dynamic traffic patterns is reduced by defining a scheduling function based on the well-known PID controller. Additionally, the life of a WSN is extended by equally distributing the consumption of all the motes, which reduces the number of interventions required to replace batteries as well as the associated cost. To help the dissemination of information coming from a WSN we have proposed jxSensor, which is an integration layer between WSNs and the well-known JXTA P2P system. As we are dealing with sensitive information, we have proposed an anonymity layer in JXTA and a light authentication method in its mobile version

Enabling the web of things: facilitating deployment, discovery and resource access to IoT objects using embedded web services

Today, the IETF Constrained Application Protocol (CoAP) is being standardised. CoAP takes the internet of things to the next level: it enables the implementation of RESTful web services on embedded devices, thus enabling the construction of an easily accessible web of things. However, before tiny objects can make themselves available through embedded web services, several manual configuration steps are still needed to integrate a sensor network within an existing networking environment. In this paper, we describe a novel self-organisation solution to facilitate the deployment of constrained networks and enable the discovery, end-to-end connectivity and service usage of these newly deployed sensor nodes. By using embedded web service technology, the need of other protocols on these resource constrained devices is avoided. It allows automatic hierarchical discovery of CoAP servers, resulting in a browsable hierarchy of CoAP servers, which can be accessed both over CoAP and hypertext transfer protocol.The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 258885 (SPITFIRE project), from the iMinds ICON project O’CareCloudS, from a VLIR PhD grant to Isam Ishaq and through an FWO pos tdoc research grant for Eli De Poorter

Enabling the web of things: facilitating deployment, discovery and resource access to IoT objects using embedded web services

Today, the IETF Constrained Application Protocol (CoAP) is being standardised. CoAP takes the internet of things to the next level: it enables the implementation of RESTful web services on embedded devices, thus enabling the construction of an easily accessible web of things. However, before tiny objects can make themselves available through embedded web services, several manual configuration steps are still needed to integrate a sensor network within an existing networking environment. In this paper, we describe a novel self-organisation solution to facilitate the deployment of constrained networks and enable the discovery, end-to-end connectivity and service usage of these newly deployed sensor nodes. By using embedded web service technology, the need of other protocols on these resource constrained devices is avoided. It allows automatic hierarchical discovery of CoAP servers, resulting in a browsable hierarchy of CoAP servers, which can be accessed both over CoAP and hypertext transfer protocol

Pervasive service discovery in low-power and lossy networks

Pervasive Service Discovery (SD) in Low-power and Lossy Networks (LLNs) is expected to play a major role in realising the Internet of Things (IoT) vision. Such a vision aims to expand the current Internet to interconnect billions of miniature smart objects that sense and act on our surroundings in a way that will revolutionise the future. The pervasiveness and heterogeneity of such low-power devices requires robust, automatic, interoperable and scalable deployment and operability solutions. At the same time, the limitations of such constrained devices impose strict challenges regarding complexity, energy consumption, time-efficiency and mobility. This research contributes new lightweight solutions to facilitate automatic deployment and operability of LLNs. It mainly tackles the aforementioned challenges through the proposition of novel component-based, automatic and efficient SD solutions that ensure extensibility and adaptability to various LLN environments. Building upon such architecture, a first fully-distributed, hybrid pushpull SD solution dubbed EADP (Extensible Adaptable Discovery Protocol) is proposed based on the well-known Trickle algorithm. Motivated by EADPs’ achievements, new methods to optimise Trickle are introduced. Such methods allow Trickle to encompass a wide range of algorithms and extend its usage to new application domains. One of the new applications is concretized in the TrickleSD protocol aiming to build automatic, reliable, scalable, and time-efficient SD. To optimise the energy efficiency of TrickleSD, two mechanisms improving broadcast communication in LLNs are proposed. Finally, interoperable standards-based SD in the IoT is demonstrated, and methods combining zero-configuration operations with infrastructure-based solutions are proposed. Experimental evaluations of the above contributions reveal that it is possible to achieve automatic, cost-effective, time-efficient, lightweight, and interoperable SD in LLNs. These achievements open novel perspectives for zero-configuration capabilities in the IoT and promise to bring the ‘things’ to all people everywhere

Actas da 10ª Conferência sobre Redes de Computadores

Universidade do MinhoCCTCCentro AlgoritmiCisco SystemsIEEE Portugal Sectio

Discovery and group communication for constrained Internet of Things devices using the Constrained Application Protocol

The ubiquitous Internet is rapidly spreading to new domains. This expansion of the Internet is comparable in scale to the spread of the Internet in the ’90s. The resulting Internet is now commonly referred to as the Internet of Things (IoT) and is expected to connect about 50 billion devices by the year 2020. This means that in just five years from the time of writing this PhD the number of interconnected devices will exceed the number of humans by sevenfold. It is further expected that the majority of these IoT devices will be resource constrained embedded devices such as sensors and actuators. Sensors collect information about the physical world and inject this information into the virtual world. Next processing and reasoning can occur and decisions can be taken to enact upon the physical world by injecting feedback to actuators. The integration of embedded devices into the Internet introduces new challenges, since many of the existing Internet technologies and protocols were not designed for this class of constrained devices. These devices are typically optimized for low cost and power consumption and thus have very limited power, memory, and processing resources and have long sleep periods. The networks formed by these embedded devices are also constrained and have different characteristics than those typical in todays Internet. These constrained networks have high packet loss, low throughput, frequent topology changes and small useful payload sizes. They are referred to as LLN. Therefore, it is in most cases unfeasible to run standard Internet protocols on this class of constrained devices and/or LLNs. New or adapted protocols that take into consideration the capabilities of the constrained devices and the characteristics of LLNs, are required. In the past few years, there were many efforts to enable the extension of the Internet technologies to constrained devices. Initially, most of these efforts were focusing on the networking layer. However, the expansion of the Internet in the 90s was not due to introducing new or better networking protocols. It was a result of introducing the World Wide Web (WWW), which made it easy to integrate services and applications. One of the essential technologies underpinning the WWW was the Hypertext Transfer Protocol (HTTP). Today, HTTP has become a key protocol in the realization of scalable web services building around the Representational State Transfer (REST) paradigm. The REST architectural style enables the realization of scalable and well-performing services using uniform and simple interfaces. The availability of an embedded counterpart of HTTP and the REST architecture could boost the uptake of the IoT. Therefore, more recently, work started to allow the integration of constrained devices in the Internet at the service level. The Internet Engineering Task Force (IETF) Constrained RESTful Environments (CoRE) working group has realized the REST architecture in a suitable form for the most constrained nodes and networks. To that end the Constrained Application Protocol (CoAP) was introduced, a specialized RESTful web transfer protocol for use with constrained networks and nodes. CoAP realizes a subset of the REST mechanisms offered by HTTP, but is optimized for Machine-to-Machine (M2M) applications. This PhD research builds upon CoAP to enable a better integration of constrained devices in the IoT and examines proposed CoAP solutions theoretically and experimentally proposing alternatives when appropriate. The first part of this PhD proposes a mechanism that facilitates the deployment of sensor networks and enables the discovery, end-to-end connectivity and service usage of newly deployed sensor nodes. The proposed approach makes use of CoAP and combines it with Domain Name System (DNS) in order to enable the use of userfriendly Fully Qualified Domain Names (FQDNs) for addressing sensor nodes. It includes the automatic discovery of sensors and sensor gateways and the translation of HTTP to CoAP, thus making the sensor resources globally discoverable and accessible from any Internet-connected client using either IPv6 addresses or DNS names both via HTTP or CoAP. As such, the proposed approach provides a feasible and flexible solution to achieve hierarchical self-organization with a minimum of pre-configuration. By doing so we minimize costly human interventions and eliminate the need for introducing new protocols dedicated for the discovery and organization of resources. This reduces both cost and the implementation footprint on the constrained devices. The second, larger, part of this PhD focuses on using CoAP to realize communication with groups of resources. In many IoT application domains, sensors or actuators need to be addressed as groups rather than individually, since individual resources might not be sufficient or useful. A simple example is that all lights in a room should go on or off as a result of the user toggling the light switch. As not all IoT applications may need group communication, the CoRE working group did not include it in the base CoAP specification. This way the base protocol is kept as efficient and as simple as possible so it would run on even the most constrained devices. Group communication and other features that might not be needed by all devices are standardized in a set of optional separate extensions. We first examined the proposed CoAP extension for group communication, which utilizes Internet Protocol version 6 (IPv6) multicasts. We highlight its strengths and weaknesses and propose our own complementary solution that uses unicast to realize group communication. Our solution offers capabilities beyond simple group communication. For example, we provide a validation mechanism that performs several checks on the group members, to make sure that combining them together is possible. We also allow the client to request that results of the individual members are processed before they are sent to the client. For example, the client can request to obtain only the maximum value of all individual members. Another important optional extension to CoAP allows clients to continuously observe resources by registering their interest in receiving notifications from CoAP servers once there are changes to the values of the observed resources. By using this publish/subscribe mechanism the client does not need to continuously poll the resource to find out whether it has changed its value. This typically leads to more efficient communication patterns that preserve valuable device and LLN resources. Unfortunately CoAP observe does not work together with the CoAP group communication extension, since the observe extension assumes unicast communication while the group communication extension only support multicast communication. In this PhD we propose to extend our own group communication solution to offer group observation capabilities. By combining group observation with group processing features, it becomes possible to notify the client only about certain changes to the observed group (e.g., the maximum value of all group members has changed). Acknowledging that the use of multicast as well as unicast has strengths and weaknesses we propose to extend our unicast based solution with certain multicast features. By doing so we try to combine the strengths of both approaches to obtain a better overall group communication that is flexible and that can be tailored according to the use case needs. Together, the proposed mechanisms represent a powerful and comprehensive solution to the challenging problem of group communication with constrained devices. We have evaluated the solutions proposed in this PhD extensively and in a variety of forms. Where possible, we have derived theoretical models and have conducted numerous simulations to validate them. We have also experimentally evaluated those solutions and compared them with other proposed solutions using a small demo box and later on two large scale wireless sensor testbeds and under different test conditions. The first testbed is located in a large, shielded room, which allows testing under controlled environments. The second testbed is located inside an operational office building and thus allows testing under normal operation conditions. Those tests revealed performance issues and some other problems. We have provided some solutions and suggestions for tackling those problems. Apart from the main contributions, two other relevant outcomes of this PhD are described in the appendices. In the first appendix we review the most important IETF standardization efforts related to the IoT and show that with the introduction of CoAP a complete set of standard protocols has become available to cover the complete networking stack and thus making the step from the IoT into the Web of Things (WoT). Using only standard protocols makes it possible to integrate devices from various vendors into one bigWoT accessible to humans and machines alike. In the second appendix, we provide an alternative solution for grouping constrained devices by using virtualization techniques. Our approach focuses on the objects, both resource-constrained and non-constrained, that need to cooperate by integrating them into a secured virtual network, named an Internet of Things Virtual Network or IoT-VN. Inside this IoT-VN full end-to-end communication can take place through the use of protocols that take the limitations of the most resource-constrained devices into account. We describe how this concept maps to several generic use cases and, as such, can constitute a valid alternative approach for supporting selected applications

Discovery and Group Communication for Constrained Internet of Things Devices using the Constrained Application Protocol

The ubiquitous Internet is rapidly spreading to new domains. This expansion of the Internet is comparable in scale to the spread of the Internet in the ’90s. The resulting Internet is now commonly referred to as the Internet of Things (IoT) and is expected to connect about 50 billion devices by the year 2020. This means that in just five years from the time of writing this PhD the number of interconnected devices will exceed the number of humans by sevenfold. It is further expected that the majority of these IoT devices will be resource constrained embedded devices such as sensors and actuators. Sensors collect information about the physical world and inject this information into the virtual world. Next processing and reasoning can occur and decisions can be taken to enact upon the physical world by injecting feedback to actuators. The integration of embedded devices into the Internet introduces new challenges, since many of the existing Internet technologies and protocols were not designed for this class of constrained devices. These devices are typically optimized for low cost and power consumption and thus have very limited power, memory, and processing resources and have long sleep periods. The networks formed by these embedded devices are also constrained and have different characteristics than those typical in todays Internet. These constrained networks have high packet loss, low throughput, frequent topology changes and small useful payload sizes. They are referred to as LLN. Therefore, it is in most cases unfeasible to run standard Internet protocols on this class of constrained devices and/or LLNs. New or adapted protocols that take into consideration the capabilities of the constrained devices and the characteristics of LLNs, are required. In the past few years, there were many efforts to enable the extension of the Internet technologies to constrained devices. Initially, most of these efforts were focusing on the networking layer. However, the expansion of the Internet in the 90s was not due to introducing new or better networking protocols. It was a result of introducing the World Wide Web (WWW), which made it easy to integrate services and applications. One of the essential technologies underpinning the WWW was the Hypertext Transfer Protocol (HTTP). Today, HTTP has become a key protocol in the realization of scalable web services building around the Representational State Transfer (REST) paradigm. The REST architectural style enables the realization of scalable and well-performing services using uniform and simple interfaces. The availability of an embedded counterpart of HTTP and the REST architecture could boost the uptake of the IoT. Therefore, more recently, work started to allow the integration of constrained devices in the Internet at the service level. The Internet Engineering Task Force (IETF) Constrained RESTful Environments (CoRE) working group has realized the REST architecture in a suitable form for the most constrained nodes and networks. To that end the Constrained Application Protocol (CoAP) was introduced, a specialized RESTful web transfer protocol for use with constrained networks and nodes. CoAP realizes a subset of the REST mechanisms offered by HTTP, but is optimized for Machine-to-Machine (M2M) applications. This PhD research builds upon CoAP to enable a better integration of constrained devices in the IoT and examines proposed CoAP solutions theoretically and experimentally proposing alternatives when appropriate. The first part of this PhD proposes a mechanism that facilitates the deployment of sensor networks and enables the discovery, end-to-end connectivity and service usage of newly deployed sensor nodes. The proposed approach makes use of CoAP and combines it with Domain Name System (DNS) in order to enable the use of userfriendly Fully Qualified Domain Names (FQDNs) for addressing sensor nodes. It includes the automatic discovery of sensors and sensor gateways and the translation of HTTP to CoAP, thus making the sensor resources globally discoverable and accessible from any Internet-connected client using either IPv6 addresses or DNS names both via HTTP or CoAP. As such, the proposed approach provides a feasible and flexible solution to achieve hierarchical self-organization with a minimum of pre-configuration. By doing so we minimize costly human interventions and eliminate the need for introducing new protocols dedicated for the discovery and organization of resources. This reduces both cost and the implementation footprint on the constrained devices. The second, larger, part of this PhD focuses on using CoAP to realize communication with groups of resources. In many IoT application domains, sensors or actuators need to be addressed as groups rather than individually, since individual resources might not be sufficient or useful. A simple example is that all lights in a room should go on or off as a result of the user toggling the light switch. As not all IoT applications may need group communication, the CoRE working group did not include it in the base CoAP specification. This way the base protocol is kept as efficient and as simple as possible so it would run on even the most constrained devices. Group communication and other features that might not be needed by all devices are standardized in a set of optional separate extensions. We first examined the proposed CoAP extension for group communication, which utilizes Internet Protocol version 6 (IPv6) multicasts. We highlight its strengths and weaknesses and propose our own complementary solution that uses unicast to realize group communication. Our solution offers capabilities beyond simple group communication. For example, we provide a validation mechanism that performs several checks on the group members, to make sure that combining them together is possible. We also allow the client to request that results of the individual members are processed before they are sent to the client. For example, the client can request to obtain only the maximum value of all individual members. Another important optional extension to CoAP allows clients to continuously observe resources by registering their interest in receiving notifications from CoAP servers once there are changes to the values of the observed resources. By using this publish/subscribe mechanism the client does not need to continuously poll the resource to find out whether it has changed its value. This typically leads to more efficient communication patterns that preserve valuable device and LLN resources. Unfortunately CoAP observe does not work together with the CoAP group communication extension, since the observe extension assumes unicast communication while the group communication extension only support multicast communication. In this PhD we propose to extend our own group communication solution to offer group observation capabilities. By combining group observation with group processing features, it becomes possible to notify the client only about certain changes to the observed group (e.g., the maximum value of all group members has changed). Acknowledging that the use of multicast as well as unicast has strengths and weaknesses we propose to extend our unicast based solution with certain multicast features. By doing so we try to combine the strengths of both approaches to obtain a better overall group communication that is flexible and that can be tailored according to the use case needs. Together, the proposed mechanisms represent a powerful and comprehensive solution to the challenging problem of group communication with constrained devices. We have evaluated the solutions proposed in this PhD extensively and in a variety of forms. Where possible, we have derived theoretical models and have conducted numerous simulations to validate them. We have also experimentally evaluated those solutions and compared them with other proposed solutions using a small demo box and later on two large scale wireless sensor testbeds and under different test conditions. The first testbed is located in a large, shielded room, which allows testing under controlled environments. The second testbed is located inside an operational office building and thus allows testing under normal operation conditions. Those tests revealed performance issues and some other problems. We have provided some solutions and suggestions for tackling those problems. Apart from the main contributions, two other relevant outcomes of this PhD are described in the appendices. In the first appendix we review the most important IETF standardization efforts related to the IoT and show that with the introduction of CoAP a complete set of standard protocols has become available to cover the complete networking stack and thus making the step from the IoT into the Web of Things (WoT). Using only standard protocols makes it possible to integrate devices from various vendors into one bigWoT accessible to humans and machines alike. In the second appendix, we provide an alternative solution for grouping constrained devices by using virtualization techniques. Our approach focuses on the objects, both resource-constrained and non-constrained, that need to cooperate by integrating them into a secured virtual network, named an Internet of Things Virtual Network or IoT-VN. Inside this IoT-VN full end-to-end communication can take place through the use of protocols that take the limitations of the most resource-constrained devices into account. We describe how this concept maps to several generic use cases and, as such, can constitute a valid alternative approach for supporting selected applications

Scaling Up Delay Tolerant Networking

Delay Tolerant Networks (DTN) introduce a networking paradigm based on store, carry and forward. This makes DTN ideal for situations where nodes experience intermittent connectivity due to movement, less than ideal infrastructure, sparse networks or other challenging environmental conditions. Standardization efforts focused around the Bundle Protoocol (BP) (RFC 5050) aim to provide a generic set of protocols and technologies to build DTNs. However, there are several challenges when trying to apply the BP to the Internet as a whole that are tackled in this thesis: There is no DTN routing mechanism that can work in Internet-scale networks. Similarly, available discovery mechanisms for opportunistic contacts do not scale to the Internet. This work presents a solution offering pull-based name resolution that is able to represent the flat unstructured BP namespace in a distributed data structure and leaves routing through the Internet to the underlying IP layer. A second challenge is the large amount of data stored by DTN nodes in large-scale applications. Reconciling two large sets of data during an opportunistic contact without any previous state in a space efficient manner is a non-trivial problem. This thesis will present a very robust solution that is almost as efficient as Bloom filters while being able to avoid false positives that would prevent full reconciliation of the sets. Lastly, when designing networks that are based on agents willing to carry information, incentives are an important factor. This thesis proposes a financially sustainable system to incentive users to participate in a DTN with their private smartphones. A user study is conducted to get a lead on the main motivational factors that let people participate in a DTN. The study gives some insight under what conditions relying on continuous motivation and cooperation from private users is a reasonable assumption when designing a DTN.Delay Tolerant Networks (DTN) sind ein Konzept für Netzwerke, das auf der Idee beruht, Datenpakete bei Bedarf längere Zeit zu speichern und vor der Weiterleitung an einen anderen Knoten physikalisch zu transportieren. Diese Vorgehensweise erlaubt den Einsatz von DTN in Netzen, die häufige Unterbrechungen aufweisen. Mit dem Bundle Protocol (BP) (RFC 5050) wird ein Satz von Standardprotokollen für DTNs entwickelt. Wenn man das BP im Internet einsetzen möchte ergeben sich einige Herausforderungen: Es existiert kein DTN Routingverfahren, das skalierbar genug ist um im Internet eingesetzt zu werden. Das Gleiche trifft auf verfügbare Discovery Mechanismen für opportunistische Netze zu. In dieser Arbeit wird ein verteilter, reaktiver Mechanismus zur Namensauflösung im DTN vorgestellt, der den flachen, unstrukturierten Namensraum des BP abbilden kann und es ermöglicht das Routing komplett der IP Schicht zu überlassen. Eine weitere Herausforderung ist die große Menge an Nachrichten, die Knoten puffern müssen. Die effiziente Synchronisierung von zwei Datensets während eines opportunistischen Kontaktes, ohne Zustandsinformationen, ist ein komplexes Problem. Diese Arbeit schlägt einen robusten Algorithmus vor, der die Effizienz eines Bloom Filters hat, dabei jedoch die False Positives vermeidet, die normalerweise eine komplette Synchronisation verhindern würden. Ein DTN basiert darauf, dass Teilnehmer Daten puffern und transportieren. Wenn diese Teilnehmer z.B. private User mit Smarpthones sind, ist es essentiell diese Benutzer zu einer dauerhaften Teilnahme am Netzwerk zu motivieren. In dieser Arbeit wird ein finanziell tragfähiges System entwickelt, welches Benutzer für eine Teilnahme am DTN belohnt. Eine Benutzerstudie wurde durchgeführt, um herauszufinden, welche Faktoren Benutzer motivieren und unter welchen Umständen davon auszugehen ist, dass Benutzer wenn man das BP im Internet einsetzen möchte dauerhaft in einem DTN kooperieren und Resourcen zur Verfügung stellen

Managing Device and Platform Heterogeneity through the Web of Things

The chaotic growth of the IoT determined a fragmented landscape with a huge number of devices, technologies, and platforms available on the market, and consequential issues of interoperability on many system deployments. The Web of Things (WoT) architecture recently proposed by the W3C consortium constitutes a novel solution to enable interoperability across IoT Platforms and application domains. At the same time, in order to see an effective improvement, a wide adoption of the W3C WoT solutions from the academic and industrial communities is required; this translates into the need of accurate and complete support tools to ease the deployment of W3C WoT applications, as well as reference guidelines about how to enable the WoT on top of existing IoT scenarios and how to deploy WoT scenarios from scratch. In this thesis, we bring three main contributions for filling such gap: (1) we introduce the WoT Store, a novel platform for managing and easing the deployment of Things and applications on the W3C WoT, and additional strategies for bringing old legacy IoT systems into the WoT. The WoT Store allows the dynamic discovery of the resources available in the environment, i.e. the Things, and to interact with each of them through a dashboard by visualizing their properties, executing commands, or observing the notifications produced. (2) We map three different IoT scenarios to WoT scenarios: a generic heterogeneous environmental monitoring scenario, a structural health monitoring scenario and an Industry4.0 scenario. (3) We make proposals to improve both the W3C standard and the node-wot software stack design: in the first case, new vocabularies are needed in order to handle particular protocols employed in industrial scenarios, while in the second case we present some contributions required for the dynamic instantiation and the migration of Web Things and WoT services in a cloud-to-edge continuum environment