33 research outputs found
Modeling and simulation of walking robots with 3 dof legs
This paper describes a simulation model for a multilegged locomotion system with 3 dof legs and leg joint actuators having saturation. For that objective the robot prescribed motion is characterized in terms of several locomotion variables. Moreover, the robot body is divided into several segments in order to emulate the behavior of an animal spine. A non-linear spring-dashpot system models the foot-ground interaction, being its parameters computed from studies on soil mechanics. To conclude, the performance of the developed model is evaluated through a set of experiments while the robot leg joints are controlled using a proportional and derivative algorithm.N/
Climbing and Walking Robots
Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study
Fault Tolerant Free Gait and Footstep Planning for Hexapod Robot Based on Monte-Carlo Tree
Legged robots can pass through complex field environments by selecting gaits
and discrete footholds carefully. Traditional methods plan gait and foothold
separately and treat them as the single-step optimal process. However, such
processing causes its poor passability in a sparse foothold environment. This
paper novelly proposes a coordinative planning method for hexapod robots that
regards the planning of gait and foothold as a sequence optimization problem
with the consideration of dealing with the harshness of the environment as leg
fault. The Monte Carlo tree search algorithm(MCTS) is used to optimize the
entire sequence. Two methods, FastMCTS, and SlidingMCTS are proposed to solve
some defeats of the standard MCTS applicating in the field of legged robot
planning. The proposed planning algorithm combines the fault-tolerant gait
method to improve the passability of the algorithm. Finally, compared with
other planning methods, experiments on terrains with different densities of
footholds and artificially-designed challenging terrain are carried out to
verify our methods. All results show that the proposed method dramatically
improves the hexapod robot's ability to pass through sparse footholds
environment
Sabertooth: A High Mobility Quadrupedal Robot Platform
Team Sabertooth aimed to design and realize an innovative high mobility, quadrupedal robot platform capable of delivering a payload over terrain otherwise impassable by wheeled vehicles at a speed of 5 feet per second. The robot uses a spring system in each of its legs for energy efficient locomotion. The 4ft x 3ft x 3ft freestanding four legged robot weighs approximately 300 pounds with an additional payload capacity of 30 pounds. An important feature of the robot is the passive, two degree of freedom body joint which allows flexibility in terms of robot motions for going around tight corners and ascending stairs. A distributed control and software architecture is used for world mapping, path planning and motion control
Sabertooth: A High Mobility Quadrupedal Robot Platform
Team Sabertooth aimed to design and realize an innovative high mobility, quadrupedal robot capable of delivering a payload over terrain impassable by wheeled vehicles at a speed of 5fps. The robot is designed to ascend and descend stairs. The robot uses a spring system in each of its legs for energy efficient locomotion. The 4\u27x3\u27x3\u27 freestanding four legged robot weighs approximately 300lbs with an additional payload capacity of 30lbs. The passive two degree of freedom body joint allows flexibility in terms of robot motion for going around tight corners and ascending stairs. The system integrates sensors for staircase recognition, obstacle avoidance, and distance calculation. A distributed control and software architecture is used for world mapping, path planning and motion control
Development of a Hybrid Powered 2D Biped Walking Machine Designed for Rough Terrain Locomotion
Biped robots hold promise as terrestrial explorers because they require a single discrete foothold to place their next step. However, biped robots are multi-input multi-output dynamically unstable machines. This makes walking on rough terrain difficult at best. Progress has been made with non-periodic rough terrain like stairs or inclines with fully active walking machines. Terrain that requires the walker to change its gait pattern from a standard walk is still problematic. Most walking machines have difficulty detecting or responding to the small perturbations induced by this type of terrain. These small perturbations can lead to unstable gait cycles and possibly a fall. The Intelligent Systems and Automation Lab at the University of Kansas has built a three legged 2D biped walking machine to be used as a test stand for studying rough terrain walking. The specific aim of this research is to investigate how biped walkers can best maintain walking stability when acted upon by small perturbations caused by periodic rough terrain. The first walking machine prototype, referred to as Jaywalker has two main custom actuation systems. The first is the hip ratchet system. It allows the walker to have either a passive or active hip swing. The second is the hybrid parallel ankle actuator. This new actuator uses a pneumatic ram and stepper motor in parallel to produce an easily controlled high torque output. In open loop control it has less than a 1° tracking error and 0.065 RPM velocity error compared to a standard stepper motor. Step testing was conducted using the Jaywalker, with a passive hip, to determine if a walker with significant leg mass could walk without full body actuation. The results of testing show the Jaywalker is ultimately not capable of walking with a passive hip. However, the walking motion is fine until the terminal stance phase. At this point the legs fall quickly towards the ground as the knee extends the shank. This quick step phenomenon is caused by increased speeds and forces about the leg and hip caused by the extension of the shank. This issue can be overcome by fully actuating the hip, or by adding counterbalances to the legs about the hip
Bio-Inspired Robotics
Modern robotic technologies have enabled robots to operate in a variety of unstructured and dynamically-changing environments, in addition to traditional structured environments. Robots have, thus, become an important element in our everyday lives. One key approach to develop such intelligent and autonomous robots is to draw inspiration from biological systems. Biological structure, mechanisms, and underlying principles have the potential to provide new ideas to support the improvement of conventional robotic designs and control. Such biological principles usually originate from animal or even plant models, for robots, which can sense, think, walk, swim, crawl, jump or even fly. Thus, it is believed that these bio-inspired methods are becoming increasingly important in the face of complex applications. Bio-inspired robotics is leading to the study of innovative structures and computing with sensory–motor coordination and learning to achieve intelligence, flexibility, stability, and adaptation for emergent robotic applications, such as manipulation, learning, and control. This Special Issue invites original papers of innovative ideas and concepts, new discoveries and improvements, and novel applications and business models relevant to the selected topics of ``Bio-Inspired Robotics''. Bio-Inspired Robotics is a broad topic and an ongoing expanding field. This Special Issue collates 30 papers that address some of the important challenges and opportunities in this broad and expanding field
Recommended from our members
Control Implementation of Dynamic Locomotion on Compliant, Underactuated, Force-Controlled Legged Robots with Non-Anthropomorphic Design
The control of locomotion on legged robots traditionally involves a robot that takes a standard legged form, such as the anthropomorphic humanoid, the dog-like quadruped, or the bird-like biped. Additionally, these systems will often be actuated with position-controlled servos or series-elastic actuators that are connected through rigid links. This work investigates the control implementation of dynamic, force-controlled locomotion on a family of legged systems that significantly deviate from these classic paradigms by incorporating modern, state-of-the-art proprioceptive actuators on uniquely configured compliant legs that do not closely resemble those found in nature. The results of this work can be used to better inform how to implement controllers on legged systems without stiff, position-controlled actuators, and also provide insight on how intelligently designed mechanical features can potentially simplify the control of complex, nonlinear dynamical systems like legged robots. To this end, this work presents the approach to control for a family of non-anthropomorphic bipedal robotic systems which are developed both in simulation and with physical hardware. The first is the Non-Anthropomorphic Biped, Version 1 (NABi-1) that features position-controlled joints along with a compliant foot element on a minimally actuated leg, and is controlled using simple open-loop trajectories based on the Zero Moment Point. The second system is the second version of the non-anthropomorphic biped (NABi-2) which utilizes the proprioceptive Back-drivable Electromagnetic Actuator for Robotics (BEAR) modules for actuation and fully realizes feedback-based force controlled locomotion. These systems are used to highlight both the strengths and weaknesses of utilizing proprioceptive actuation in systems, and suggest the tradeoffs that are made when using force control for dynamic locomotion. These systems also present case studies for different approaches to system design when it comes to bipedal legged robots
Climbing and Walking Robots
With the advancement of technology, new exciting approaches enable us to render mobile robotic systems more versatile, robust and cost-efficient. Some researchers combine climbing and walking techniques with a modular approach, a reconfigurable approach, or a swarm approach to realize novel prototypes as flexible mobile robotic platforms featuring all necessary locomotion capabilities. The purpose of this book is to provide an overview of the latest wide-range achievements in climbing and walking robotic technology to researchers, scientists, and engineers throughout the world. Different aspects including control simulation, locomotion realization, methodology, and system integration are presented from the scientific and from the technical point of view. This book consists of two main parts, one dealing with walking robots, the second with climbing robots. The content is also grouped by theoretical research and applicative realization. Every chapter offers a considerable amount of interesting and useful information