Resiliency in numerical algorithm design for extreme scale simulations

This work is based on the seminar titled ‘Resiliency in Numerical Algorithm Design for Extreme Scale Simulations’ held March 1–6, 2020, at Schloss Dagstuhl, that was attended by all the authors. Advanced supercomputing is characterized by very high computation speeds at the cost of involving an enormous amount of resources and costs. A typical large-scale computation running for 48 h on a system consuming 20 MW, as predicted for exascale systems, would consume a million kWh, corresponding to about 100k Euro in energy cost for executing 1023 floating-point operations. It is clearly unacceptable to lose the whole computation if any of the several million parallel processes fails during the execution. Moreover, if a single operation suffers from a bit-flip error, should the whole computation be declared invalid? What about the notion of reproducibility itself: should this core paradigm of science be revised and refined for results that are obtained by large-scale simulation? Naive versions of conventional resilience techniques will not scale to the exascale regime: with a main memory footprint of tens of Petabytes, synchronously writing checkpoint data all the way to background storage at frequent intervals will create intolerable overheads in runtime and energy consumption. Forecasts show that the mean time between failures could be lower than the time to recover from such a checkpoint, so that large calculations at scale might not make any progress if robust alternatives are not investigated. More advanced resilience techniques must be devised. The key may lie in exploiting both advanced system features as well as specific application knowledge. Research will face two essential questions: (1) what are the reliability requirements for a particular computation and (2) how do we best design the algorithms and software to meet these requirements? While the analysis of use cases can help understand the particular reliability requirements, the construction of remedies is currently wide open. One avenue would be to refine and improve on system- or application-level checkpointing and rollback strategies in the case an error is detected. Developers might use fault notification interfaces and flexible runtime systems to respond to node failures in an application-dependent fashion. Novel numerical algorithms or more stochastic computational approaches may be required to meet accuracy requirements in the face of undetectable soft errors. These ideas constituted an essential topic of the seminar. The goal of this Dagstuhl Seminar was to bring together a diverse group of scientists with expertise in exascale computing to discuss novel ways to make applications resilient against detected and undetected faults. In particular, participants explored the role that algorithms and applications play in the holistic approach needed to tackle this challenge. This article gathers a broad range of perspectives on the role of algorithms, applications and systems in achieving resilience for extreme scale simulations. The ultimate goal is to spark novel ideas and encourage the development of concrete solutions for achieving such resilience holistically.Peer Reviewed"Article signat per 36 autors/es: Emmanuel Agullo, Mirco Altenbernd, Hartwig Anzt, Leonardo Bautista-Gomez, Tommaso Benacchio, Luca Bonaventura, Hans-Joachim Bungartz, Sanjay Chatterjee, Florina M. Ciorba, Nathan DeBardeleben, Daniel Drzisga, Sebastian Eibl, Christian Engelmann, Wilfried N. Gansterer, Luc Giraud, Dominik G ̈oddeke, Marco Heisig, Fabienne Jezequel, Nils Kohl, Xiaoye Sherry Li, Romain Lion, Miriam Mehl, Paul Mycek, Michael Obersteiner, Enrique S. Quintana-Ortiz, Francesco Rizzi, Ulrich Rude, Martin Schulz, Fred Fung, Robert Speck, Linda Stals, Keita Teranishi, Samuel Thibault, Dominik Thonnes, Andreas Wagner and Barbara Wohlmuth"Postprint (author's final draft

Scaling and Resilience in Numerical Algorithms for Exascale Computing

The first Petascale supercomputer, the IBM Roadrunner, went online in 2008. Ten years later, the community is now looking ahead to a new generation of Exascale machines. During the decade that has passed, several hundred Petascale capable machines have been installed worldwide, yet despite the abundance of machines, applications that scale to their full size remain rare. Large clusters now routinely have 50.000+ cores, some have several million. This extreme level of parallelism, that has allowed a theoretical compute capacity in excess of a million billion operations per second, turns out to be difficult to use in many applications of practical interest. Processors often end up spending more time waiting for synchronization, communication, and other coordinating operations to complete, rather than actually computing. Component reliability is another challenge facing HPC developers. If even a single processor fail, among many thousands, the user is forced to restart traditional applications, wasting valuable compute time. These issues collectively manifest themselves as low parallel efficiency, resulting in waste of energy and computational resources. Future performance improvements are expected to continue to come in large part due to increased parallelism. One may therefore speculate that the difficulties currently faced, when scaling applications to Petascale machines, will progressively worsen, making it difficult for scientists to harness the full potential of Exascale computing. The thesis comprises two parts. Each part consists of several chapters discussing modifications of numerical algorithms to make them better suited for future Exascale machines. In the first part, the use of Parareal for Parallel-in-Time integration techniques for scalable numerical solution of partial differential equations is considered. We propose a new adaptive scheduler that optimize the parallel efficiency by minimizing the time-subdomain length without making communication of time-subdomains too costly. In conjunction with an appropriate preconditioner, we demonstrate that it is possible to obtain time-parallel speedup on the nonlinear shallow water equation, beyond what is possible using conventional spatial domain-decomposition techniques alone. The part is concluded with the proposal of a new method for constructing Parallel-in-Time integration schemes better suited for convection dominated problems. In the second part, new ways of mitigating the impact of hardware failures are developed and presented. The topic is introduced with the creation of a new fault-tolerant variant of Parareal. In the chapter that follows, a C++ Library for multi-level checkpointing is presented. The library uses lightweight in-memory checkpoints, protected trough the use of erasure codes, to mitigate the impact of failures by decreasing the overhead of checkpointing and minimizing the compute work lost. Erasure codes have the unfortunate property that if more data blocks are lost than parity codes created, the data is effectively considered unrecoverable. The final chapter contains a preliminary study on partial information recovery for incomplete checksums. Under the assumption that some meta knowledge exists on the structure of the data encoded, we show that the data lost may be recovered, at least partially. This result is of interest not only in HPC but also in data centers where erasure codes are widely used to protect data efficiently

System software techniques to enhance reliability of modern platforms

192

Algorithmic approaches to enhancing and exploiting application-level error tolerance

As late-CMOS process scaling leads to increasingly variable circuits/logic and as most post-CMOS technologies in sight appear to have largely stochastic characteristics, hardware reliability has become a first-order design concern. To make matters worse, emerging computing systems are becoming increasingly power constrained. Traditional hardware/software approaches are likely to be impractical for these power constrained systems due to their heavy reliance on redundant, worstcase, and conservative designs. The primary goal of this research has been to investigate how we can leverage inherent application and algorithm characteristics (e.g. natural error resilience, spatial and temporal reuse, and fault containment) to build more efficient robust systems. This dissertation research describes algorithmic approaches that leverage application and algorithm-awareness for building such systems. These approaches include (a) application-specific techniques for low-overhead fault detection, (b) an algorithmic approach for error correction using localization, (c) selection of scientific computing solver schemes to leverage application-level error resilience, and (d) a numerical optimization-based methodology for converting applications into a more error tolerant form. This dissertation shows that application and algorithm-awareness can significantly increase the robustness of computing systems, while also reducing the cost of meeting reliability targets

Software for Exascale Computing - SPPEXA 2016-2019

This open access book summarizes the research done and results obtained in the second funding phase of the Priority Program 1648 "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) presented at the SPPEXA Symposium in Dresden during October 21-23, 2019. In that respect, it both represents a continuation of Vol. 113 in Springer’s series Lecture Notes in Computational Science and Engineering, the corresponding report of SPPEXA’s first funding phase, and provides an overview of SPPEXA’s contributions towards exascale computing in today's sumpercomputer technology. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest

Proceedings of the 22nd Conference on Formal Methods in Computer-Aided Design – FMCAD 2022

The Conference on Formal Methods in Computer-Aided Design (FMCAD) is an annual conference on the theory and applications of formal methods in hardware and system verification. FMCAD provides a leading forum to researchers in academia and industry for presenting and discussing groundbreaking methods, technologies, theoretical results, and tools for reasoning formally about computing systems. FMCAD covers formal aspects of computer-aided system design including verification, specification, synthesis, and testing

Proceedings of the 22nd Conference on Formal Methods in Computer-Aided Design – FMCAD 2022

The Conference on Formal Methods in Computer-Aided Design (FMCAD) is an annual conference on the theory and applications of formal methods in hardware and system verification. FMCAD provides a leading forum to researchers in academia and industry for presenting and discussing groundbreaking methods, technologies, theoretical results, and tools for reasoning formally about computing systems. FMCAD covers formal aspects of computer-aided system design including verification, specification, synthesis, and testing

Proceedings of the 21st Conference on Formal Methods in Computer-Aided Design – FMCAD 2021

The Conference on Formal Methods in Computer-Aided Design (FMCAD) is an annual conference on the theory and applications of formal methods in hardware and system verification. FMCAD provides a leading forum to researchers in academia and industry for presenting and discussing groundbreaking methods, technologies, theoretical results, and tools for reasoning formally about computing systems. FMCAD covers formal aspects of computer-aided system design including verification, specification, synthesis, and testing