Localization Of Sensors In Presence Of Fading And Mobility

The objective of this dissertation is to estimate the location of a sensor through analysis of signal strengths of messages received from a collection of mobile anchors. In particular, a sensor node determines its location from distance measurements to mobile anchors of known locations. We take into account the uncertainty and fluctuation of the RSS as a result of fading and take into account the decay of the RSS which is proportional to the transmitter-receiver distance power raised to the PLE. The objective is to characterize the channel in order to derive accurate distance estimates from RSS measurements and then utilize the distance estimates in locating the sensors. To characterize the channel, two techniques are presented for the mobile anchors to periodically estimate the channel\u27s PLE and fading parameter. Both techniques estimate the PLE by solving an equation via successive approximations. The formula in the first is stated directly from MLE analysis whereas in the second is derived from a simple probability analysis. Then two distance estimates are proposed, one based on a derived formula and the other based on the MLE analysis. Then a location technique is proposed where two anchors are sufficient to uniquely locate a sensor. That is, the sensor narrows down its possible locations to two when collects RSS measurements transmitted by a mobile anchor, then uniquely determines its location when given a distance to the second anchor. Analysis shows the PLE has no effect on the accuracy of the channel characterization, the normalized error in the distance estimation is invariant to the estimated distance, and accurate location estimates can be achieved from a moderate sample of RSS measurements

Intelligent Circuits and Systems

ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society.　 This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering

Radio channel characterisation and system-level modelling for ultra wideband body-centric wireless communications

PhDThe next generation of wireless communication is evolving towards user-centric networks, where constant and reliable connectivity and services are essential. Bodycentric wireless network (BCWN) is the most exciting and emerging 4G technology for short (1-5 m) and very short (below 1 m) range communication systems. It has got numerous applications including healthcare, entertainment, surveillance, emergency, sports and military. The major difference between the BCWN and conventional wireless systems is the radio channel over which the communication takes place. The human body is a hostile medium from the radio propagation perspective and it is therefore important to understand and characterise the effect of the human body on the antenna elements, the radio propagation channel parameters and hence the system performance. In addition, fading is another concern that affects the reliability and quality of the wireless link, which needs to be taken into account for a low cost and reliable wireless communication system for body-centric networks. The complex nature of the BCWN requires operating wireless devices to provide low power requirements, less complexity, low cost and compactness in size. Apart from these characteristics, scalable data rates and robust performance in most fading conditions and jamming environment, even at low signal to noise ratio (SNR) is needed. Ultra-wideband (UWB) technology is one of the most promising candidate for BCWN as it tends to fulfill most of these requirements. The thesis focuses on the characterisation of ultra wideband body-centric radio propagation channel using single and multiple antenna techniques. Apart from channel characterisation, system level modelling of potential UWB radio transceivers for body-centric wireless network is also proposed. Channel models with respect to large scale and delay analysis are derived from measured parameters. Results and analyses highlight the consequences of static and dynamic environments in addition to the antenna positions on the performance of body-centric wireless communication channels. Extensive measurement i campaigns are performed to analyse the significance of antenna diversity to combat the channel fading in body-centric wireless networks. Various diversity combining techniques are considered in this process. Measurement data are also used to predict the performance of potential UWB systems in the body-centric wireless networks. The study supports the significance of single and multiple antenna channel characterisation and modelling in producing suitable wireless systems for ultra low power body-centric wireless networks.University of Engineering and Technology Lahore Pakista

Applications

Volume 3 describes how resource-aware machine learning methods and techniques are used to successfully solve real-world problems. The book provides numerous specific application examples: in health and medicine for risk modelling, diagnosis, and treatment selection for diseases in electronics, steel production and milling for quality control during manufacturing processes in traffic, logistics for smart cities and for mobile communications

Design and validation of a structural health monitoring system for aeronautical structures.

Structural Health Monitoring (SHM) is an area where the main objective is the verification of the state or the health of the structures in order to ensure proper performance and maintenance cost savings using a sensor network attached to the structure, continuous monitoring and algorithms. Different benefits are derived from the implementation of SHM, some of them are: knowledge about the behavior of the structure under different loads and different environmental changes, knowledge of the current state in order to verify the integrity of the structure and determine whether a structure can work properly or whether it needs to be maintained or replaced and, therefore, to reduce maintenance costs. The paradigm of damage identification (comparison between the data collected from the structure without damages and the current structure in orderto determine if there are any changes) can be tackled as a pattern recognition problem. Some statistical techniques as Principal Component Analysis (PCA) or Independent Component Analysis (ICA) are very useful for this purpose because they allow obtaining the most relevant information from a large amount of variables. This thesis uses an active piezoelectric system to develop statistical data driven approaches for the detection, localization and classification of damages in structures. This active piezoelectric system is permanently attached to the surface of the structure under test in order to apply vibrational excitations and sensing the dynamical responses propagated through the structure at different points. As pattern recognition technique, PCA is used to perform the main task of the proposed methodology: to build a base-line model of the structure without damage and subsequentlyto compare the data from the current structure (under test) with this model. Moreover, different damage indices are calculated to detect abnormalities in the structure under test. Besides, the localization of the damage can be determined by means of the contribution of each sensor to each index. This contribution is calculated by several different methods and their comparison is performed. To classify different damages, the damage detection methodology is extended using a Self-Organizing Map (SOM), which is properly trained and validated to build a pattern baseline model using projections of the data onto the PCAmodel and damage detection indices. This baseline is further used as a reference for blind diagnosis tests of structures. Additionally, PCA is replaced by ICAas pattern recognition technique. A comparison between the two methodologies is performed highlighting advantages and disadvantages. In order to study the performance of the damage classification methodology under different scenarios, the methodology is tested using data from a structure under several different temperatures. The methodologies developed in this work are tested and validated using different structures, in particular an aircraft turbine blade, an aircraft wing skeleton, an aircraft fuselage,some aluminium plates and some composite matarials plates.La monitorización de daños en estructuras (SHM por sus siglas en inglés) es un área que tiene como principal objetivo la verificación del estado o la salud de la estructura con el fin de asegurar el correcto funcionamiento de esta y ahorrar costos de mantenimiento. Para esto se hace uso de sensores que son adheridos a la estructura, monitorización continua y algoritmos. Diferentes beneficios se obtienen de la aplicación de SHM, algunos de ellos son: el conocimiento sobre el desempeño de la estructura cuando esta es sometida a diversas cargas y cambios ambientales, el conocimiento del estado actual de la estructura con el fin de determinar la integridad de la estructura y definir si esta puede trabajar adecuadamente o si por el contrario debe ser reparada o reemplazada con el correspondiente beneficio del ahorro de gastos de mantenimiento. El paradigma de la identificación de daños (comparación entre los datos obtenidos de la estructura sin daños y la estructura en un estado posterior para determinar cambios) puede ser abordado como un problema de reconocimiento de patrones. Algunas técnicas estadísticas tales como Análisis de Componentes Principales (PCA por sus siglas en inglés) o Análisis de Componentes Independientes (ICA por sus siglas en ingles) son muy útiles para este propósito puesto que permiten obtener la información más relevante de una gran cantidad de variables. Esta tesis hace uso de un sistema piezoeléctrico activo para el desarrollo de algoritmos estadísticos de manejo de datos para la detección, localización y clasificación de daños en estructuras. Este sistema piezoeléctrico activo está permanentemente adherido a la superficie de la estructura bajo prueba con el objeto de aplicar señales vibracionales de excitación y recoger las respuestas dinámicas propagadas a través de la estructura en diferentes puntos. Como técnica de reconocimiento de patrones se usa Análisis de Componentes Principales para realizar la tarea principal de la metodología propuesta: construir un modelo PCA base de la estructura sin daño y posteriormente compararlo con los datos de la estructura bajo prueba. Adicionalmente, algunos índices de daños son calculados para detectar anormalidades en la estructura bajo prueba. Para la localización de daños se usan las contribuciones de cada sensor a cada índice, las cuales son calculadas mediante varios métodos de contribución y comparadas para mostrar sus ventajas y desventajas. Para la clasificación de daños, se amplia la metodología de detección añadiendo el uso de Mapas auto-organizados, los cuales son adecuadamente entrenados y validados para construir un modelo patrón base usando proyecciones de los datos sobre el modelo PCA base e índices de detección de daños. Este patrón es usado como referencia para realizar un diagnóstico ciego de la estructura. Adicionalmente, dentro de la metodología propuesta, se utiliza ICA en lugar de PCA como técnica de reconocimiento de patrones. Se incluye también una comparación entre la aplicación de las dos técnicas para mostrar las ventajas y desventajas. Para estudiar el desempeño de la metodología de clasificación de daños bajo diferentes escenarios, esta se prueba usando datos obtenidos de una estructura sometida a diferentes temperaturas. Las metodologías desarrolladas en este trabajo fueron probadas y validadas usando diferentes estructuras, en particular un álabe de turbina, un esqueleto de ala y un fuselaje de avión, así como algunas placas de aluminio y de material compuest

Particle Swarm Optimization

Particle swarm optimization (PSO) is a population based stochastic optimization technique influenced by the social behavior of bird flocking or fish schooling.PSO shares many similarities with evolutionary computation techniques such as Genetic Algorithms (GA). The system is initialized with a population of random solutions and searches for optima by updating generations. However, unlike GA, PSO has no evolution operators such as crossover and mutation. In PSO, the potential solutions, called particles, fly through the problem space by following the current optimum particles. This book represents the contributions of the top researchers in this field and will serve as a valuable tool for professionals in this interdisciplinary field

Networks, Communication, and Computing Vol. 2

Networks, communications, and computing have become ubiquitous and inseparable parts of everyday life. This book is based on a Special Issue of the Algorithms journal, and it is devoted to the exploration of the many-faceted relationship of networks, communications, and computing. The included papers explore the current state-of-the-art research in these areas, with a particular interest in the interactions among the fields

Air Force Institute of Technology Research Report 2006

This report summarizes the research activities of the Air Force Institute of Technology’s Graduate School of Engineering and Management. It describes research interests and faculty expertise; lists student theses/dissertations; identifies research sponsors and contributions; and outlines the procedures for contacting the school. Included in the report are: faculty publications, conference presentations, consultations, and funded research projects. Research was conducted in the areas of Aeronautical and Astronautical Engineering, Electrical Engineering and Electro-Optics, Computer Engineering and Computer Science, Systems and Engineering Management, Operational Sciences, Mathematics, Statistics and Engineering Physics

Applications

Volume 3 describes how resource-aware machine learning methods and techniques are used to successfully solve real-world problems. The book provides numerous specific application examples: in health and medicine for risk modelling, diagnosis, and treatment selection for diseases in electronics, steel production and milling for quality control during manufacturing processes in traffic, logistics for smart cities and for mobile communications

High-Performance Modelling and Simulation for Big Data Applications

This open access book was prepared as a Final Publication of the COST Action IC1406 “High-Performance Modelling and Simulation for Big Data Applications (cHiPSet)“ project. Long considered important pillars of the scientific method, Modelling and Simulation have evolved from traditional discrete numerical methods to complex data-intensive continuous analytical optimisations. Resolution, scale, and accuracy have become essential to predict and analyse natural and complex systems in science and engineering. When their level of abstraction raises to have a better discernment of the domain at hand, their representation gets increasingly demanding for computational and data resources. On the other hand, High Performance Computing typically entails the effective use of parallel and distributed processing units coupled with efficient storage, communication and visualisation systems to underpin complex data-intensive applications in distinct scientific and technical domains. It is then arguably required to have a seamless interaction of High Performance Computing with Modelling and Simulation in order to store, compute, analyse, and visualise large data sets in science and engineering. Funded by the European Commission, cHiPSet has provided a dynamic trans-European forum for their members and distinguished guests to openly discuss novel perspectives and topics of interests for these two communities. This cHiPSet compendium presents a set of selected case studies related to healthcare, biological data, computational advertising, multimedia, finance, bioinformatics, and telecommunications