Variable-based multi-module data caches for clustered VLIW processors

Memory structures consume an important fraction of the total processor energy. One solution to reduce the energy consumed by cache memories consists of reducing their supply voltage and/or increase their threshold voltage at an expense in access time. We propose to divide the L1 data cache into two cache modules for a clustered VLIW processor consisting of two clusters. Such division is done on a variable basis so that the address of a datum determines its location. Each cache module is assigned to a cluster and can be set up as a fast power-hungry module or as a slow power-aware module. We also present compiler techniques in order to distribute variables between the two cache modules and generate code accordingly. We have explored several cache configurations using the Mediabench suite and we have observed that the best distributed cache organization outperforms traditional cache organizations by 19%-31% in energy-delay and by 11%-29% in energy-delay. In addition, we also explore a reconfigurable distributed cache, where the cache can be reconfigured on a context switch. This reconfigurable scheme further outperforms the best previous distributed organization by 3%-4%.Peer ReviewedPostprint (published version

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Doctor of Philosophy

dissertationThe embedded system space is characterized by a rapid evolution in the complexity and functionality of applications. In addition, the short time-to-market nature of the business motivates the use of programmable devices capable of meeting the conflicting constraints of low-energy, high-performance, and short design times. The keys to achieving these conflicting constraints are specialization and maximally extracting available application parallelism. General purpose processors are flexible but are either too power hungry or lack the necessary performance. Application-specific integrated circuits (ASICS) efficiently meet the performance and power needs but are inflexible. Programmable domain-specific architectures (DSAs) are an attractive middle ground, but their design requires significant time, resources, and expertise in a variety of specialties, which range from application algorithms to architecture and ultimately, circuit design. This dissertation presents CoGenE, a design framework that automates the design of energy-performance-optimal DSAs for embedded systems. For a given application domain and a user-chosen initial architectural specification, CoGenE consists of a a Compiler to generate execution binary, a simulator Generator to collect performance/energy statistics, and an Explorer that modifies the current architecture to improve energy-performance-area characteristics. The above process repeats automatically until the user-specified constraints are achieved. This removes or alleviates the time needed to understand the application, manually design the DSA, and generate object code for the DSA. Thus, CoGenE is a new design methodology that represents a significant improvement in performance, energy dissipation, design time, and resources. This dissertation employs the face recognition domain to showcase a flexible architectural design methodology that creates "ASIC-like" DSAs. The DSAs are instruction set architecture (ISA)-independent and achieve good energy-performance characteristics by coscheduling the often conflicting constraints of data access, data movement, and computation through a flexible interconnect. This represents a significant increase in programming complexity and code generation time. To address this problem, the CoGenE compiler employs integer linear programming (ILP)-based 'interconnect-aware' scheduling techniques for automatic code generation. The CoGenE explorer employs an iterative technique to search the complete design space and select a set of energy-performance-optimal candidates. When compared to manual designs, results demonstrate that CoGenE produces superior designs for three application domains: face recognition, speech recognition and wireless telephony. While CoGenE is well suited to applications that exhibit a streaming behavior, multithreaded applications like ray tracing present a different but important challenge. To demonstrate its generality, CoGenE is evaluated in designing a novel multicore N-wide SIMD architecture, known as StreamRay, for the ray tracing domain. CoGenE is used to synthesize the SIMD execution cores, the compiler that generates the application binary, and the interconnection subsystem. Further, separating address and data computations in space reduces data movement and contention for resources, thereby significantly improving performance compared to existing ray tracing approaches

Thermal-Aware Compilation for Register Window-Based Embedded Processors

The development of compiler-based mechanisms to optimize the thermal profile of large register files to improve the processor reliability has become an important issue. Thermal hotspots have been known to cause severe reliability issues, while the thermal profile of the devices is also related to the leakage power consumption and the cooling cost. Register window-based architectures provide a relatively large register files. However, such large register files are not designed or utilized for thermal balancing or reliability enhancement. In this paper, we propose a compilation flow that utilizes the register windows to reduce optimize the thermal profile and to reduce the hotspots. As a result, the thermal profile and reliability of the device is clearly improved. Simulation results show that the proposed flow achieves up to 91% reduction of hotspots and 11% reduction of the peak temperature in embedded processors

Optimizing energy-efficiency for multi-core packet processing systems in a compiler framework

Network applications become increasingly computation-intensive and the amount of traffic soars unprecedentedly nowadays. Multi-core and multi-threaded techniques are thus widely employed in packet processing system to meet the changing requirement. However, the processing power cannot be fully utilized without a suitable programming environment. The compilation procedure is decisive for the quality of the code. It can largely determine the overall system performance in terms of packet throughput, individual packet latency, core utilization and energy efficiency. The thesis investigated compilation issues in networking domain first, particularly on energy consumption. And as a cornerstone for any compiler optimizations, a code analysis module for collecting program dependency is presented and incorporated into a compiler framework. With that dependency information, a strategy based on graph bi-partitioning and mapping is proposed to search for an optimal configuration in a parallel-pipeline fashion. The energy-aware extension is specifically effective in enhancing the energy-efficiency of the whole system. Finally, a generic evaluation framework for simulating the performance and energy consumption of a packet processing system is given. It accepts flexible architectural configuration and is capable of performingarbitrary code mapping. The simulation time is extremely short compared to full-fledged simulators. A set of our optimization results is gathered using the framework

Improving Energy Efficiency of Application-Specific Instruction-Set Processors

Present-day consumer mobile devices seem to challenge the concept of embedded computing by bringing the equivalent of supercomputing power from two decades ago into hand-held devices. This challenge, however, is well met by pushing the boundaries of embedded computing further into areas previously monopolised by Application-Specific Integrated Circuits (ASICs). Furthermore, in areas traditionally associated with embedded computing, an increase in the complexity of algorithms and applications requires a continuous rise in availability of computing power and energy efficiency in order to fit within the same, or smaller, power budget. It is, ultimately, the amount of energy the application execution consumes that dictates the usefulness of a programmable embedded system, in comparison with implementation of an ASIC.This Thesis aimed to explore the energy efficiency overheads of Application-Specific InstructionSet Processors (ASIPs), a class of embedded processors aiming to compete with ASICs. While an ASIC can be designed to provide precise performance and energy efficiency required by a specific application without unnecessary overheads, the cost of design and verification, as well as the inability to upgrade or modify, favour more flexible programmable solutions. The ASIP designs can match the computing performance of the ASIC for specific applications. What is left, therefore, is achieving energy efficiency of a similar order of magnitude.In the past, one area of ASIP design that has been identified as a major consumer of energy is storage of temporal values produced during computation – the Register File (RF), with the associated interconnection network to transport those values between registers and computational Function Units (FUs). In this Thesis, the energy efficiency of RF and interconnection network is studied using the Transport Triggered Architectures (TTAs) template. Specifically, compiler optimisations aiming at reducing the traffic of temporal values between RF and FUs are presented in this Thesis. Bypassing of the temporal value, from the output of the FU which produces it directly in the input ports of the FUs that require it to continue with the computation, saves multiple RF reads. In addition, if all the uses of such a temporal value can be bypassed, the RF write can be eliminated as well. Such optimisations result in a simplification of the RF, via a reduction in the actual number of registers present or a reduction in the number of read and write ports in the RF and improved energy efficiency. In cases where the limited number of the simultaneous RF reads or writes cause a performance bottleneck, such optimisations result in performance improvements leading to faster execution times, therefore, allowing for execution at lower clock frequencies resulting in additional energy savings.Another area of the ASIP design consuming a significant amount of energy is the instruction memory subsystem, which is the artefact required for the programmability of the embedded processor. As this subsystem is not present in ASIC, the energy consumed for storing an application program and reading it from the instruction memories to control processor execution is an overhead that needs to be minimised. In this Thesis, one particular tool to improve the energy efficiency of the instruction memory subsystem – instruction buffer – is examined. While not trivially obvious, the presence of buffers for storing loop bodies, or parts of them, results in a reduced number of reads from the instruction memories. As a result, memories can be put to lower power state leading to lower overall energy consumption, pending energy-efficient buffer implementation. Specifically, an energy-efficient implementation of the instruction buffer is presented in this Thesis, together with analysis tools to identify candidate loops and assess their suitability for storing in the instruction buffer.The studies presented in this Thesis show that the energy overheads associated with the use of embedded processors, in comparison to ad-hoc ASIC solutions, are manageable when carefully considered during the design of an embedded system for a particular application, or application domain. Finally, the methods presented in this Thesis do not restrict the reprogrammability of the embedded system

An automated OpenCL FPGA compilation framework targeting a configurable, VLIW chip multiprocessor

Modern system-on-chips augment their baseline CPU with coprocessors and accelerators to increase overall computational capacity and power efficiency, and thus have evolved into heterogeneous systems. Several languages have been developed to enable this paradigm shift, including CUDA and OpenCL. This thesis discusses a unified compilation environment to enable heterogeneous system design through the use of OpenCL and a customised VLIW chip multiprocessor (CMP) architecture, known as the LE1. An LLVM compilation framework was researched and a prototype developed to enable the execution of OpenCL applications on the LE1 CPU. The framework fully automates the compilation flow and supports work-item coalescing to better utilise the CPU cores and alleviate the effects of thread divergence. This thesis discusses in detail both the software stack and target hardware architecture and evaluates the scalability of the proposed framework on a highly precise cycle-accurate simulator. This is achieved through the execution of 12 benchmarks across 240 different machine configurations, as well as further results utilising an incomplete development branch of the compiler. It is shown that the problems generally scale well with the LE1 architecture, up to eight cores, when the memory system becomes a serious bottleneck. Results demonstrate superlinear performance on certain benchmarks (x9 for the bitonic sort benchmark with 8 dual-issue cores) with further improvements from compiler optimisations (x14 for bitonic with the same configuration

Thermal-Aware Compilation for System-on-Chip Processing Architectures

The development of compiler-based mechanisms to reduce the percentage of hotspots and optimize the thermal profile of large register files has become an important issue. Thermal hotspots have been known to cause severe reliability issues, while the thermal profile of the devices is also related to the leakage power consumption and the cooling cost. In this paper we propose several compilation techniques that, based on an efficient register allocation mechanism, reduce the percentage of hotspots in the register file and uniformly distribute the heat. As a result, the thermal profile and reliability of the device is clearly improved. Simulation results show that the proposed flow achieved 91% reduction of hotspots and 11% reduction of the peak temperature

Performance and Memory Space Optimizations for Embedded Systems

Embedded systems have three common principles: real-time performance, low power consumption, and low price (limited hardware). Embedded computers use chip multiprocessors (CMPs) to meet these expectations. However, one of the major problems is lack of efficient software support for CMPs; in particular, automated code parallelizers are needed. The aim of this study is to explore various ways to increase performance, as well as reducing resource usage and energy consumption for embedded systems. We use code restructuring, loop scheduling, data transformation, code and data placement, and scratch-pad memory (SPM) management as our tools in different embedded system scenarios. The majority of our work is focused on loop scheduling. Main contributions of our work are: We propose a memory saving strategy that exploits the value locality in array data by storing arrays in a compressed form. Based on the compressed forms of the input arrays, our approach automatically determines the compressed forms of the output arrays and also automatically restructures the code. We propose and evaluate a compiler-directed code scheduling scheme, which considers both parallelism and data locality. It analyzes the code using a locality parallelism graph representation, and assigns the nodes of this graph to processors.We also introduce an Integer Linear Programming based formulation of the scheduling problem. We propose a compiler-based SPM conscious loop scheduling strategy for array/loop based embedded applications. The method is to distribute loop iterations across parallel processors in an SPM-conscious manner. The compiler identifies potential SPM hits and misses, and distributes loop iterations such that the processors have close execution times. We present an SPM management technique using Markov chain based data access. We propose a compiler directed integrated code and data placement scheme for 2-D mesh based CMP architectures. Using a Code-Data Affinity Graph (CDAG) to represent the relationship between loop iterations and array data, it assigns the sets of loop iterations to processing cores and sets of data blocks to on-chip memories. We present a memory bank aware dynamic loop scheduling scheme for array intensive applications.The goal is to minimize the number of memory banks needed for executing the group of loop iterations