1,271 research outputs found
Connecting the World of Embedded Mobiles: The RIOT Approach to Ubiquitous Networking for the Internet of Things
The Internet of Things (IoT) is rapidly evolving based on low-power compliant
protocol standards that extend the Internet into the embedded world. Pioneering
implementations have proven it is feasible to inter-network very constrained
devices, but had to rely on peculiar cross-layered designs and offer a
minimalistic set of features. In the long run, however, professional use and
massive deployment of IoT devices require full-featured, cleanly composed, and
flexible network stacks.
This paper introduces the networking architecture that turns RIOT into a
powerful IoT system, to enable low-power wireless scenarios. RIOT networking
offers (i) a modular architecture with generic interfaces for plugging in
drivers, protocols, or entire stacks, (ii) support for multiple heterogeneous
interfaces and stacks that can concurrently operate, and (iii) GNRC, its
cleanly layered, recursively composed default network stack. We contribute an
in-depth analysis of the communication performance and resource efficiency of
RIOT, both on a micro-benchmarking level as well as by comparing IoT
communication across different platforms. Our findings show that, though it is
based on significantly different design trade-offs, the networking subsystem of
RIOT achieves a performance equivalent to that of Contiki and TinyOS, the two
operating systems which pioneered IoT software platforms
Goodbye, ALOHA!
©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft
Survey of Spectrum Sharing for Inter-Technology Coexistence
Increasing capacity demands in emerging wireless technologies are expected to
be met by network densification and spectrum bands open to multiple
technologies. These will, in turn, increase the level of interference and also
result in more complex inter-technology interactions, which will need to be
managed through spectrum sharing mechanisms. Consequently, novel spectrum
sharing mechanisms should be designed to allow spectrum access for multiple
technologies, while efficiently utilizing the spectrum resources overall.
Importantly, it is not trivial to design such efficient mechanisms, not only
due to technical aspects, but also due to regulatory and business model
constraints. In this survey we address spectrum sharing mechanisms for wireless
inter-technology coexistence by means of a technology circle that incorporates
in a unified, system-level view the technical and non-technical aspects. We
thus systematically explore the spectrum sharing design space consisting of
parameters at different layers. Using this framework, we present a literature
review on inter-technology coexistence with a focus on wireless technologies
with equal spectrum access rights, i.e. (i) primary/primary, (ii)
secondary/secondary, and (iii) technologies operating in a spectrum commons.
Moreover, we reflect on our literature review to identify possible spectrum
sharing design solutions and performance evaluation approaches useful for
future coexistence cases. Finally, we discuss spectrum sharing design
challenges and suggest future research directions
JamLab: Augmenting Sensornet Testbeds with Realistic and Controlled Interference Generation
Radio interference drastically affects the performance of sensor-net communications, leading to packet loss and reduced energy-efficiency. As an increasing number of wireless devices operates on the same ISM frequencies, there is a strong need for understanding and debugging the performance of existing sensornet protocols under interference. Doing so requires a low-cost flexible testbed infrastructure that allows the repeatable generation of a wide range of interference patterns. Unfortunately, to date, existing sensornet testbeds lack such capabilities, and do not permit to study easily the coexistence problems between devices sharing the same frequencies. This paper addresses the current lack of such an infrastructure by using off-the-shelf sensor motes to record and playback interference patterns as well as to generate customizable and repeat-able interference in real-time. We propose and develop JamLab: a low-cost infrastructure to augment existing sensornet testbeds with accurate interference generation while limiting the overhead to a simple upload of the appropriate software. We explain how we tackle the hardware limitations and get an accurate measurement and regeneration of interference, and we experimentally evaluate the accuracy of JamLab with respect to time, space, and intensity. We further use JamLab to characterize the impact of interference on sensornet MAC protocols
Smart Grid Communications: Overview of Research Challenges, Solutions, and Standardization Activities
Optimization of energy consumption in future intelligent energy networks (or
Smart Grids) will be based on grid-integrated near-real-time communications
between various grid elements in generation, transmission, distribution and
loads. This paper discusses some of the challenges and opportunities of
communications research in the areas of smart grid and smart metering. In
particular, we focus on some of the key communications challenges for realizing
interoperable and future-proof smart grid/metering networks, smart grid
security and privacy, and how some of the existing networking technologies can
be applied to energy management. Finally, we also discuss the coordinated
standardization efforts in Europe to harmonize communications standards and
protocols.Comment: To be published in IEEE Communications Surveys and Tutorial
A Case for Time Slotted Channel Hopping for ICN in the IoT
Recent proposals to simplify the operation of the IoT include the use of
Information Centric Networking (ICN) paradigms. While this is promising,
several challenges remain. In this paper, our core contributions (a) leverage
ICN communication patterns to dynamically optimize the use of TSCH (Time
Slotted Channel Hopping), a wireless link layer technology increasingly popular
in the IoT, and (b) make IoT-style routing adaptive to names, resources, and
traffic patterns throughout the network--both without cross-layering. Through a
series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware,
we find that our approach is fully robust against wireless interference, and
almost halves the energy consumed for transmission when compared to CSMA. Most
importantly, our adaptive scheduling prevents the time-slotted MAC layer from
sacrificing throughput and delay
- …