Consistent joint photometric and geometric image registration

In this paper, we derive a novel robust image alignment technique that performs joint geometric and photometric registration in the total least square sense. The main idea is to use the total least square metrics instead of the ordinary least square metrics, which is commonly used in the literature. While the OLS model indicates that the target image may contain noise and the reference image should be noise-free, this puts a severe limitation on practical registration problems. By introducing the TLS model, which allows perturbations in both images, we can obtain mutually consistent parameters. Experimental results show that our method is indeed much more consistent and accurate in presence of noise compared to existing registration algorithms

Super resolution and dynamic range enhancement of image sequences

Camera producers try to increase the spatial resolution of a camera by reducing size of sites on sensor array. However, shot noise causes the signal to noise ratio drop as sensor sites get smaller. This fact motivates resolution enhancement to be performed through software. Super resolution (SR) image reconstruction aims to combine degraded images of a scene in order to form an image which has higher resolution than all observations. There is a demand for high resolution images in biomedical imaging, surveillance, aerial/satellite imaging and high-definition TV (HDTV) technology. Although extensive research has been conducted in SR, attention has not been given to increase the resolution of images under illumination changes. In this study, a unique framework is proposed to increase the spatial resolution and dynamic range of a video sequence using Bayesian and Projection onto Convex Sets (POCS) methods. Incorporating camera response function estimation into image reconstruction allows dynamic range enhancement along with spatial resolution improvement. Photometrically varying input images complicate process of projecting observations onto common grid by violating brightness constancy. A contrast invariant feature transform is proposed in this thesis to register input images with high illumination variation. Proposed algorithm increases the repeatability rate of detected features among frames of a video. Repeatability rate is increased by computing the autocorrelation matrix using the gradients of contrast stretched input images. Presented contrast invariant feature detection improves repeatability rate of Harris corner detector around %25 on average. Joint multi-frame demosaicking and resolution enhancement is also investigated in this thesis. Color constancy constraint set is devised and incorporated into POCS framework for increasing resolution of color-filter array sampled images. Proposed method provides fewer demosaicking artifacts compared to existing POCS method and a higher visual quality in final image

Digital Stack Photography and Its Applications

<p>This work centers on digital stack photography and its applications.</p><p>A stack of images refer, in a broader sense, to an ensemble of</p><p>associated images taken with variation in one or more than one various </p><p>values in one or more parameters in system configuration or setting.</p><p>An image stack captures and contains potentially more information than</p><p>any of the constituent images. Digital stack photography (DST)</p><p>techniques explore the rich information to render a synthesized image</p><p>that oversteps the limitation in a digital camera's capabilities.</p><p>This work considers in particular two basic DST problems, which had</p><p>been challenging, and their applications. One is high-dynamic-range</p><p>(HDR) imaging of non-stationary dynamic scenes, in which the stacked</p><p>images vary in exposure conditions. The other</p><p>is large scale panorama composition from multiple images. In this</p><p>case, the image components are related to each other by the spatial</p><p>relation among the subdomains of the same scene they covered and</p><p>captured jointly. We consider the non-conventional, practical and</p><p>challenge situations where the spatial overlap among the sub-images is</p><p>sparse (S), irregular in geometry and imprecise from the designed</p><p>geometry (I), and the captured data over the overlap zones are noisy</p><p>(N) or lack of features. We refer to these conditions simply as the</p><p>S.I.N. conditions.</p><p>There are common challenging issues with both problems. For example,</p><p>both faced the dominant problem with image alignment for</p><p>seamless and artifact-free image composition. Our solutions to the</p><p>common problems are manifested differently in each of the particular</p><p>problems, as a result of adaption to the specific properties in each</p><p>type of image ensembles. For the exposure stack, existing</p><p>alignment approaches struggled to overcome three main challenges:</p><p>inconsistency in brightness, large displacement in dynamic scene and</p><p>pixel saturation. We exploit solutions in the following three</p><p>aspects. In the first, we introduce a model that addresses and admits</p><p>changes in both geometric configurations and optical conditions, while</p><p>following the traditional optical flow description. Previous models</p><p>treated these two types of changes one or the other, namely, with</p><p>mutual exclusions. Next, we extend the pixel-based optical flow model</p><p>to a patch-based model. There are two-fold advantages. A patch has</p><p>texture and local content that individual pixels fail to present. It</p><p>also renders opportunities for faster processing, such as via</p><p>two-scale or multiple-scale processing. The extended model is then</p><p>solved efficiently with an EM-like algorithm, which is reliable in the</p><p>presence of large displacement. Thirdly, we present a generative</p><p>model for reducing or eliminating typical artifacts as a side effect</p><p>of an inadequate alignment for clipped pixels. A patch-based texture</p><p>synthesis is combined with the patch-based alignment to achieve an</p><p>artifact free result.</p><p>For large-scale panorama composition under the S.I.N. conditions, we</p><p>have developed an effective solution scheme that significantly reduces</p><p>both processing time and artifacts. Previously existing approaches can</p><p>be roughly categorized as either geometry-based composition or feature</p><p>based composition. In the former approach, one relies on precise</p><p>knowledge of the system geometry, by design and/or calibration. It</p><p>works well with a far-away scene, in which case there is only limited</p><p>variation in projective geometry among the sub-images. However, the</p><p>system geometry is not invariant to physical conditions such as</p><p>thermal variation, stress variation and etc.. The composition with</p><p>this approach is typically done in the spatial space. The other</p><p>approach is more robust to geometric and optical conditions. It works</p><p>surprisingly well with feature-rich and stationary scenes, not well</p><p>with the absence of recognizable features. The composition based on</p><p>feature matching is typically done in the spatial gradient domain. In</p><p>short, both approaches are challenged by the S.I.N. conditions. With</p><p>certain snapshot data sets obtained and contributed by Brady et al, </p><p>these methods either fail in composition or render images with</p><p>visually disturbing artifacts. To overcome the S.I.N. conditions, we</p><p>have reconciled these two approaches and made successful and</p><p>complementary use of both priori and approximate information about</p><p>geometric system configuration and the feature information from the</p><p>image data. We also designed and developed a software architecture</p><p>with careful extraction of primitive function modules that can be</p><p>efficiently implemented and executed in parallel. In addition to a</p><p>much faster processing speed, the resulting images are clear and</p><p>sharper at the overlapping zones, without typical ghosting artifacts.</p>Dissertatio

Variational image fusion

The main goal of this work is the fusion of multiple images to a single composite that offers more information than the individual input images. We approach those fusion tasks within a variational framework. First, we present iterative schemes that are well-suited for such variational problems and related tasks. They lead to efficient algorithms that are simple to implement and well-parallelisable. Next, we design a general fusion technique that aims for an image with optimal local contrast. This is the key for a versatile method that performs well in many application areas such as multispectral imaging, decolourisation, and exposure fusion. To handle motion within an exposure set, we present the following two-step approach: First, we introduce the complete rank transform to design an optic flow approach that is robust against severe illumination changes. Second, we eliminate remaining misalignments by means of brightness transfer functions that relate the brightness values between frames. Additional knowledge about the exposure set enables us to propose the first fully coupled method that jointly computes an aligned high dynamic range image and dense displacement fields. Finally, we present a technique that infers depth information from differently focused images. In this context, we additionally introduce a novel second order regulariser that adapts to the image structure in an anisotropic way.Das Hauptziel dieser Arbeit ist die Fusion mehrerer Bilder zu einem Einzelbild, das mehr Informationen bietet als die einzelnen Eingangsbilder. Wir verwirklichen diese Fusionsaufgaben in einem variationellen Rahmen. Zunächst präsentieren wir iterative Schemata, die sich gut für solche variationellen Probleme und verwandte Aufgaben eignen. Danach entwerfen wir eine Fusionstechnik, die ein Bild mit optimalem lokalen Kontrast anstrebt. Dies ist der Schlüssel für eine vielseitige Methode, die gute Ergebnisse für zahlreiche Anwendungsbereiche wie Multispektralaufnahmen, Bildentfärbung oder Belichtungsreihenfusion liefert. Um Bewegungen in einer Belichtungsreihe zu handhaben, präsentieren wir folgenden Zweischrittansatz: Zuerst stellen wir die komplette Rangtransformation vor, um eine optische Flussmethode zu entwerfen, die robust gegenüber starken Beleuchtungsänderungen ist. Dann eliminieren wir verbleibende Registrierungsfehler mit der Helligkeitstransferfunktion, welche die Helligkeitswerte zwischen Bildern in Beziehung setzt. Zusätzliches Wissen über die Belichtungsreihe ermöglicht uns, die erste vollständig gekoppelte Methode vorzustellen, die gemeinsam ein registriertes Hochkontrastbild sowie dichte Bewegungsfelder berechnet. Final präsentieren wir eine Technik, die von unterschiedlich fokussierten Bildern Tiefeninformation ableitet. In diesem Kontext stellen wir zusätzlich einen neuen Regularisierer zweiter Ordnung vor, der sich der Bildstruktur anisotrop anpasst

Variational image fusion

The main goal of this work is the fusion of multiple images to a single composite that offers more information than the individual input images. We approach those fusion tasks within a variational framework. First, we present iterative schemes that are well-suited for such variational problems and related tasks. They lead to efficient algorithms that are simple to implement and well-parallelisable. Next, we design a general fusion technique that aims for an image with optimal local contrast. This is the key for a versatile method that performs well in many application areas such as multispectral imaging, decolourisation, and exposure fusion. To handle motion within an exposure set, we present the following two-step approach: First, we introduce the complete rank transform to design an optic flow approach that is robust against severe illumination changes. Second, we eliminate remaining misalignments by means of brightness transfer functions that relate the brightness values between frames. Additional knowledge about the exposure set enables us to propose the first fully coupled method that jointly computes an aligned high dynamic range image and dense displacement fields. Finally, we present a technique that infers depth information from differently focused images. In this context, we additionally introduce a novel second order regulariser that adapts to the image structure in an anisotropic way.Das Hauptziel dieser Arbeit ist die Fusion mehrerer Bilder zu einem Einzelbild, das mehr Informationen bietet als die einzelnen Eingangsbilder. Wir verwirklichen diese Fusionsaufgaben in einem variationellen Rahmen. Zunächst präsentieren wir iterative Schemata, die sich gut für solche variationellen Probleme und verwandte Aufgaben eignen. Danach entwerfen wir eine Fusionstechnik, die ein Bild mit optimalem lokalen Kontrast anstrebt. Dies ist der Schlüssel für eine vielseitige Methode, die gute Ergebnisse für zahlreiche Anwendungsbereiche wie Multispektralaufnahmen, Bildentfärbung oder Belichtungsreihenfusion liefert. Um Bewegungen in einer Belichtungsreihe zu handhaben, präsentieren wir folgenden Zweischrittansatz: Zuerst stellen wir die komplette Rangtransformation vor, um eine optische Flussmethode zu entwerfen, die robust gegenüber starken Beleuchtungsänderungen ist. Dann eliminieren wir verbleibende Registrierungsfehler mit der Helligkeitstransferfunktion, welche die Helligkeitswerte zwischen Bildern in Beziehung setzt. Zusätzliches Wissen über die Belichtungsreihe ermöglicht uns, die erste vollständig gekoppelte Methode vorzustellen, die gemeinsam ein registriertes Hochkontrastbild sowie dichte Bewegungsfelder berechnet. Final präsentieren wir eine Technik, die von unterschiedlich fokussierten Bildern Tiefeninformation ableitet. In diesem Kontext stellen wir zusätzlich einen neuen Regularisierer zweiter Ordnung vor, der sich der Bildstruktur anisotrop anpasst