Likelihood-Maximizing-Based Multiband Spectral Subtraction for Robust Speech Recognition

Automatic speech recognition performance degrades significantly when speech is affected by environmental noise. Nowadays, the major challenge is to achieve good robustness in adverse noisy conditions so that automatic speech recognizers can be used in real situations. Spectral subtraction (SS) is a well-known and effective approach; it was originally designed for improving the quality of speech signal judged by human listeners. SS techniques usually improve the quality and intelligibility of speech signal while speech recognition systems need compensation techniques to reduce mismatch between noisy speech features and clean trained acoustic model. Nevertheless, correlation can be expected between speech quality improvement and the increase in recognition accuracy. This paper proposes a novel approach for solving this problem by considering SS and the speech recognizer not as two independent entities cascaded together, but rather as two interconnected components of a single system, sharing the common goal of improved speech recognition accuracy. This will incorporate important information of the statistical models of the recognition engine as a feedback for tuning SS parameters. By using this architecture, we overcome the drawbacks of previously proposed methods and achieve better recognition accuracy. Experimental evaluations show that the proposed method can achieve significant improvement of recognition rates across a wide range of signal to noise ratios

Structural uncertainty identification using mode shape information

This thesis is concerned with efficient uncertainty identification (UI) – namely the nonlinear inverse problem of establishing specific statistical properties of an uncertain structure from a practically-limited supply of low-frequency dynamic response information. An established UI approach (published in 2005) which uses Maximum Likelihood Estimation (MLE) and the Perturbation Method of uncertainty propagation is adopted for the study using (for the first time) mode shape information rather than just natural or resonant frequencies. The thesis develops a method based on the use of selected coefficients in a generalized displacement model i.e. a weighted series of spatially-continuous multiply-differentiable base functions to approximate the structural free-vibration response of an uncertain structure. The focus is placed on the estimation (from relatively small data sets) of the statistical properties of the location of an attached point-mass with normally-distributed position. Simulated data for uncertain point-mass-loaded linear beam and plate structures is initially used to test the method making use of as much exact or closed-form differentiable information as possible to obtain frequencies and mode shapes. In the case of plate structures, extensive use is made of the Rayleigh Ritz method to generate the required response coefficients. This is shown to have significant advantages over alternatives such as the Finite Element method. The approach developed for use with free vibration information is then tested on measured experimental data obtained from an acoustically-forced clamped plate. Structural displacement measurements are taken from the plate using Vibromap 1000, a commercially-available ESPI-based holomodal measurement system capable of wide-field vibration response observation in real-time, or quantitative displacement response measurement. The thesis shows that the developed uncertainty identification method works well for beams and plates using simulated free-vibration dat

A Nonlinear Mixture Autoregressive Model For Speaker Verification

In this work, we apply a nonlinear mixture autoregressive (MixAR) model to supplant the Gaussian mixture model for speaker verification. MixAR is a statistical model that is a probabilistically weighted combination of components, each of which is an autoregressive filter in addition to a mean. The probabilistic mixing and the datadependent weights are responsible for the nonlinear nature of the model. Our experiments with synthetic as well as real speech data from standard speech corpora show that MixAR model outperforms GMM, especially under unseen noisy conditions. Moreover, MixAR did not require delta features and used 2.5x fewer parameters to achieve comparable or better performance as that of GMM using static as well as delta features. Also, MixAR suffered less from overitting issues than GMM when training data was sparse. However, MixAR performance deteriorated more quickly than that of GMM when evaluation data duration was reduced. This could pose limitations on the required minimum amount of evaluation data when using MixAR model for speaker verification

Acoustic Adaptation to Dynamic Background Conditions with Asynchronous Transformations

This paper proposes a framework for performing adaptation to complex and non-stationary background conditions in Automatic Speech Recognition (ASR) by means of asynchronous Constrained Maximum Likelihood Linear Regression (aCMLLR) transforms and asynchronous Noise Adaptive Training (aNAT). The proposed method aims to apply the feature transform that best compensates the background for every input frame. The implementation is done with a new Hidden Markov Model (HMM) topology that expands the usual left-to-right HMM into parallel branches adapted to different background conditions and permits transitions among them. Using this, the proposed adaptation does not require ground truth or previous knowledge about the background in each frame as it aims to maximise the overall log-likelihood of the decoded utterance. The proposed aCMLLR transforms can be further improved by retraining models in an aNAT fashion and by using speaker-based MLLR transforms in cascade for an efficient modelling of background effects and speaker. An initial evaluation in a modified version of the WSJCAM0 corpus incorporating 7 different background conditions provides a benchmark in which to evaluate the use of aCMLLR transforms. A relative reduction of 40.5% in Word Error Rate (WER) was achieved by the combined use of aCMLLR and MLLR in cascade. Finally, this selection of techniques was applied in the transcription of multi-genre media broadcasts, where the use of aNAT training, aCMLLR transforms and MLLR transforms provided a relative improvement of 2–3%

Temporally Varying Weight Regression for Speech Recognition

Ph.DDOCTOR OF PHILOSOPH

Métodos discriminativos para la optimización de modelos en la Verificación del Hablante

La creciente necesidad de sistemas de autenticación seguros ha motivado el interés de algoritmos efectivos de Verificación de Hablante (VH). Dicha necesidad de algoritmos de alto rendimiento, capaces de obtener tasas de error bajas, ha abierto varias ramas de investigación. En este trabajo proponemos investigar, desde un punto de vista discriminativo, un conjunto de metodologías para mejorar el desempeño del estado del arte de los sistemas de VH. En un primer enfoque investigamos la optimización de los hiper-parámetros para explícitamente considerar el compromiso entre los errores de falsa aceptación y falso rechazo. El objetivo de la optimización se puede lograr maximizando el área bajo la curva conocida como ROC (Receiver Operating Characteristic) por sus siglas en inglés. Creemos que esta optimización de los parámetros no debe de estar limitada solo a un punto de operación y una estrategia más robusta es optimizar los parámetros para incrementar el área bajo la curva, AUC (Area Under the Curve por sus siglas en inglés) de modo que todos los puntos sean maximizados. Estudiaremos cómo optimizar los parámetros utilizando la representación matemática del área bajo la curva ROC basada en la estadística de Wilcoxon Mann Whitney (WMW) y el cálculo adecuado empleando el algoritmo de descendente probabilístico generalizado. Además, analizamos el efecto y mejoras en métricas como la curva detection error tradeoff (DET), el error conocido como Equal Error Rate (EER) y el valor mínimo de la función de detección de costo, minimum value of the detection cost function (minDCF) todos ellos por sue siglas en inglés. En un segundo enfoque, investigamos la señal de voz como una combinación de atributos que contienen información del hablante, del canal y el ruido. Los sistemas de verificación convencionales entrenan modelos únicos genéricos para todos los casos, y manejan las variaciones de estos atributos ya sea usando análisis de factores o no considerando esas variaciones de manera explícita. Proponemos una nueva metodología para particionar el espacio de los datos de acuerdo a estas carcterísticas y entrenar modelos por separado para cada partición. Las particiones se pueden obtener de acuerdo a cada atributo. En esta investigación mostraremos como entrenar efectivamente los modelos de manera discriminativa para maximizar la separación entre ellos. Además, el diseño de algoritimos robustos a las condiciones de ruido juegan un papel clave que permite a los sistemas de VH operar en condiciones reales. Proponemos extender nuestras metodologías para mitigar los efectos del ruido en esas condiciones. Para nuestro primer enfoque, en una situación donde el ruido se encuentre presente, el punto de operación puede no ser solo un punto, o puede existir un corrimiento de forma impredecible. Mostraremos como nuestra metodología de maximización del área bajo la curva ROC es más robusta que la usada por clasificadores convencionales incluso cuando el ruido no está explícitamente considerado. Además, podemos encontrar ruido a diferentes relación señal a ruido (SNR) que puede degradar el desempeño del sistema. Así, es factible considerar una descomposición eficiente de las señales de voz que tome en cuenta los diferentes atributos como son SNR, el ruido y el tipo de canal. Consideramos que en lugar de abordar el problema con un modelo unificado, una descomposición en particiones del espacio de características basado en atributos especiales puede proporcionar mejores resultados. Esos atributos pueden representar diferentes canales y condiciones de ruido. Hemos analizado el potencial de estas metodologías que permiten mejorar el desempeño del estado del arte de los sistemas reduciendo el error, y por otra parte controlar los puntos de operación y mitigar los efectos del ruido

Subspace Gaussian mixture models for automatic speech recognition

In most of state-of-the-art speech recognition systems, Gaussian mixture models (GMMs) are used to model the density of the emitting states in the hidden Markov models (HMMs). In a conventional system, the model parameters of each GMM are estimated directly and independently given the alignment. This results a large number of model parameters to be estimated, and consequently, a large amount of training data is required to fit the model. In addition, different sources of acoustic variability that impact the accuracy of a recogniser such as pronunciation variation, accent, speaker factor and environmental noise are only weakly modelled and factorized by adaptation techniques such as maximum likelihood linear regression (MLLR), maximum a posteriori adaptation (MAP) and vocal tract length normalisation (VTLN). In this thesis, we will discuss an alternative acoustic modelling approach — the subspace Gaussian mixture model (SGMM), which is expected to deal with these two issues better. In an SGMM, the model parameters are derived from low-dimensional model and speaker subspaces that can capture phonetic and speaker correlations. Given these subspaces, only a small number of state-dependent parameters are required to derive the corresponding GMMs. Hence, the total number of model parameters can be reduced, which allows acoustic modelling with a limited amount of training data. In addition, the SGMM-based acoustic model factorizes the phonetic and speaker factors and within this framework, other source of acoustic variability may also be explored. In this thesis, we propose a regularised model estimation for SGMMs, which avoids overtraining in case that the training data is sparse. We will also take advantage of the structure of SGMMs to explore cross-lingual acoustic modelling for low-resource speech recognition. Here, the model subspace is estimated from out-domain data and ported to the target language system. In this case, only the state-dependent parameters need to be estimated which relaxes the requirement of the amount of training data. To improve the robustness of SGMMs against environmental noise, we propose to apply the joint uncertainty decoding (JUD) technique that is shown to be efficient and effective. We will report experimental results on the Wall Street Journal (WSJ) database and GlobalPhone corpora to evaluate the regularisation and cross-lingual modelling of SGMMs. Noise compensation using JUD for SGMM acoustic models is evaluated on the Aurora 4 database