Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks

Exploiting the power of multiplicity: a holistic survey of network-layer multipath

The Internet is inherently a multipath network: For an underlying network with only a single path, connecting various nodes would have been debilitatingly fragile. Unfortunately, traditional Internet technologies have been designed around the restrictive assumption of a single working path between a source and a destination. The lack of native multipath support constrains network performance even as the underlying network is richly connected and has redundant multiple paths. Computer networks can exploit the power of multiplicity, through which a diverse collection of paths is resource pooled as a single resource, to unlock the inherent redundancy of the Internet. This opens up a new vista of opportunities, promising increased throughput (through concurrent usage of multiple paths) and increased reliability and fault tolerance (through the use of multiple paths in backup/redundant arrangements). There are many emerging trends in networking that signify that the Internet's future will be multipath, including the use of multipath technology in data center computing; the ready availability of multiple heterogeneous radio interfaces in wireless (such as Wi-Fi and cellular) in wireless devices; ubiquity of mobile devices that are multihomed with heterogeneous access networks; and the development and standardization of multipath transport protocols such as multipath TCP. The aim of this paper is to provide a comprehensive survey of the literature on network-layer multipath solutions. We will present a detailed investigation of two important design issues, namely, the control plane problem of how to compute and select the routes and the data plane problem of how to split the flow on the computed paths. The main contribution of this paper is a systematic articulation of the main design issues in network-layer multipath routing along with a broad-ranging survey of the vast literature on network-layer multipathing. We also highlight open issues and identify directions for future work

Decisive analysis of current state of the art in congestion aware and control routing models in ad hoc networks

An important aspect that portrays a crucial position in the ad hoc network routing is congestion. Almost every research analysis is en-route in adapting this key factor in addressing congestion. This problem cannot be totally addressed by the regular TCP protocol based networks, keeping in view the special assets which include multi hop sharing etc, which is difficult to ascertain in ad hoc networks. Many attempts have been made and are in progress by researchers to provide unique solutions to the above mentioned problems. This paper projects a vital study on jamming aware and different routing standards that have been dealt with in recent times

Interference - minimized multipath routing with congestion control in wireless sensor network for multimedia streaming

Master'sMASTER OF ENGINEERIN

Comprehensive Survey Congestion Control Mechanisms in Wireless Sensor Networks:Comprehensive Survey

Wireless sensor network (WSN) occupies the top rank of the widely used networks for gathering different type of information from different averments. WSN has nodes with limited resources so congestion can cause a critical damage to such network where it limited resources can be exhausted. Many approaches has been proposed to deal with this problem. In this paper, different proposed algorithm for congestion detection, notification, mitigation and avoidance has been listed and discussed. These algorithms has been investigated by presenting its advantages and disadvantages. This paper provides a robust background for readers and researches for wireless sensor networks congestion control approaches. Keywords: WSN, Congestion Control, congestion mitigation, congestion detection, sink channel load, buffer load

Video streaming in urban vehicular environments: Junction-aware multipath approach

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. In multipath video streaming transmission, the selection of the best vehicle for video packet forwarding considering the junction area is a challenging task due to the several diversions in the junction area. The vehicles in the junction area change direction based on the different diversions, which lead to video packet drop. In the existing works, the explicit consideration of different positions in the junction areas has not been considered for forwarding vehicle selection. To address the aforementioned challenges, a Junction-Aware vehicle selection for Multipath Video Streaming (JA-MVS) scheme has been proposed. The JA-MVS scheme considers three different cases in the junction area including the vehicle after the junction, before the junction and inside the junction area, with an evaluation of the vehicle signal strength based on the signal to interference plus noise ratio (SINR), which is based on the multipath data forwarding concept using greedy-based geographic routing. The performance of the proposed scheme is evaluated based on the Packet Loss Ratio (PLR), Structural Similarity Index (SSIM) and End-to-End Delay (E2ED) metrics. The JA-MVS is compared against two baseline schemes, Junction-Based Multipath Source Routing (JMSR) and the Adaptive Multipath geographic routing for Video Transmission (AMVT), in urban Vehicular Ad-Hoc Networks (VANETs)

Interference-aware multipath video streaming in vehicular environments

The multipath transmission is one of the suitable transmission methods for high data rate oriented communication such as video streaming. Each video packets are split into smaller frames for parallel transmission via different paths. One path may interfere with another path due to these parallel transmissions. The multipath oriented interference is due to the route coupling which is one of the major challenges in vehicular traffic environments. The route coupling increases channel contention resulting in video packet collision. In this context, this paper proposes an Interference-aware Multipath Video Streaming (I-MVS) framework focusing on link and node disjoint optimal paths. Specifically, a multipath vehicular network model is derived. The model is utilized to develop interference-aware video streaming method considering angular driving statistics of vehicles. The quality of video streaming links is measured based on packet error rate considering non-circular transmission range oriented shadowing effects. Algorithms are developed as a complete operational I-MVS framework. The comparative performance evaluation attests the benefit of the proposed framework considering various video streaming related metrics

Energy Aware Multipath Routing in Wireless Sensor Networks

Wireless Sensor Networks(WSNs) are made of sensor nodes with restricted battery life and transmission capability. In this work we propose an energy efficient multipath routing algorithm in WSN. This protocol is designed to improve the latency, resiliency and efficiency through discovering multiple paths from the source to the destination. It has a sink initiated Route Discovery process with the location information of the source known to the sink. There are two types of nodes which are used here one is primary and the other is alternate. At the end of the route formation one primary path and multiple number of alternate paths are built,and, all nodes except the primary are put to sleep mode which helps us to save energy and generate a collision free path, the primary path is used to transmit the data from source to the sink and if the route disrupts, the next best alternate route is used for the purpose and if no path exists between the source and destination then process starts from the beginning. Our simulation finds the latency, packet delivery ratio, average control packet overhead and total energy consumed. The proposed protocol has 12% (approx.) less control packet overhead in comparison to MR2 and LIEMRO,5% less average energy consumption in comparison to MR2 and 28% less average energy consumption in comparison to LIEMRO. Regarding latency the proposed protocol has similar result to MR2 but in comparison to LIEMRO the algorithm is 24% faster. Lastly in case of Packet Delivery Ratio the proposed protocol gives 5% better result in comparison to MR2 and, 12% better result in comparison to LIEMRO on an average

Towards video streaming in IoT environments: vehicular communication perspective

Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues