Network layer security: Design for a cross layer architecture

Traditional modular layering schemes have served a major part in the development of a variety of protocols. However, as the physical layer impairments become more unpredictable, a cross layer design (CLD) which is dynamic in nature provides better performance. CLD introduces new challenges in protocol design as well as in the area of security. Using numerical analysis, we show that a link layer design employing header compression and cross layer signalling to protect protocol headers can limit packet discarding. This paper also reviews the IPsec protocol and describes how IPsec can be modified for cross layer architecture. © 2007 IEEE

Design Aspects of a Testbed for an IPv6-Based Future Network for Aeronautical Safety and Non-Safety Communication

Mineralogy & gem

Control and Non-Payload Communications (CNPC) Prototype Radio - Generation 2 Security Flight Test Report

NASA Glenn Research Center (GRC), in cooperation with Rockwell Collins, is working to develop a prototype Control and Non-Payload Communications (CNPC) radio platform as part of NASA Integrated Systems Research Program's (ISRP) Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. A primary focus of the project is to work with the Federal Aviation Administration (FAA) and industry standards bodies to build and demonstrate a safe, secure, and efficient CNPC architecture that can be used by industry to evaluate the feasibility of deploying a system using these technologies in an operational capacity. GRC has been working in conjunction with these groups to assess threats, identify security requirements, and to develop a system of standards-based security controls that can be applied to the GRC prototype CNPC architecture as a demonstration platform. The proposed security controls were integrated into the GRC flight test system aboard our S-3B Viking surrogate aircraft and several network tests were conducted during a flight on November 15th, 2014 to determine whether the controls were working properly within the flight environment. The flight test was also the first to integrate Robust Header Compression (ROHC) as a means of reducing the additional overhead introduced by the security controls and Mobile IPv6. The effort demonstrated the complete end-to-end secure CNPC link in a relevant flight environment

Control and Non-Payload Communications (CNPC) Prototype Radio - Generation 2 Security Architecture Lab Test Report

NASA Glenn Research Center, in cooperation with Rockwell Collins, is working to develop a prototype Control and Non-Payload Communications (CNPC) radio platform as part of NASA Integrated Systems Research Program's (ISRP) Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. A primary focus of the project is to work with the FAA and industry standards bodies to build and demonstrate a safe, secure, and efficient CNPC architecture that can be used by industry to evaluate the feasibility of deploying a system using these technologies in an operational capacity. GRC has been working in conjunction with these groups to assess threats, identify security requirements, and to develop a system of standards-based security controls that can be applied to the current GRC prototype CNPC architecture as a demonstration platform. The security controls were integrated into a lab test bed mock-up of the Mobile IPv6 architecture currently being used for NASA flight testing, and a series of network tests were conducted to evaluate the security overhead of the controls compared to the baseline CNPC link without any security. The aim of testing was to evaluate the performance impact of the additional security control overhead when added to the Mobile IPv6 architecture in various modes of operation. The statistics collected included packet captures at points along the path to gauge packet size as the sample data traversed the CNPC network, round trip latency, jitter, and throughput. The effort involved a series of tests of the baseline link, a link with Robust Header Compression (ROHC) and without security controls, a link with security controls and without ROHC, and finally a link with both ROHC and security controls enabled. The effort demonstrated that ROHC is both desirable and necessary to offset the additional expected overhead of applying security controls to the CNPC link

The Shrink-Wrapped VPN Node

The wide availability of public domain IPsec implementations allows the creation of VPNs based on low-cost platforms. However, setting up a VPN node involves a lot of work such as the creation of IPsec Security Associations and associated tunnels, including the necessary management of keys. Moreover, routing and firewall facilities must be provided to ensure the isolation of the members of the VPN from the public Internet. In this paper we present a drop-in VPN node that is compact, low-cost and requires little administration or maintenance. We discuss the features and advantages of our system. Next, we demonstrate how this system was used for the creation of a VPN linking networks within the University campus with others located in outside locations (e.g. other companies, home networks etc.) Finally, we present our evaluation of the work performed and describe our future plans

A new security extension for SCTP

In 2000, the Signaling Transport (SIGTRAN) working group of the IETF defined the Stream Control Transmission Protocol (SCTP) as a new transport protocol. SCTP is a new multi-purpose reliable transport protocol. Due to its various features and easy extensibility it is a valid option not only for already standardised applications but also in many new application scenarios. SCTP has several advantages over TCP and UDP. The analysis of already standardised as well as potential SCTP application scenarios clearly indicates that secure end-to-end transport is one of the crucial requirements for SCTP in the future. Up to now there exist two standardised SCTP security solutions which are called TLS over SCTP [37] and SCTP over IPSec [12]. The goal of this thesis was to evaluate existing SCTP security solutions and find an optimised and efficient security solution. Several drawbacks of the standardised SCTP security solutions identified during the analysis are mainly related to features distinguishing SCTP from TCP and UDP. To avoid these drawbacks a new security solution for SCTP, called Secure SCTP (S-SCTP), is proposed which integrates the cryptographic functions into SCTP. One main requirement was that S-SCTP should be fully compatible with standard SCTP while additionally providing strong security i.e. data confidentiality, integrity and authentication. This also means that all features, options and extensions available for standard SCTP have to be supported. Furthermore, S-SCTP should have advantages with respect to performance over all parameter ranges of SCTP and be user-friendly. To specify the S-SCTP protocol extension several new control messages and new message parameters have been defined. Furthermore, procedures for initialisation, rekeying, and termination of secure sessions have been specified and modelled in SDL. Based on an SCTP implementation available in our group and an open source implementation of TLS, TLS over SCTP and S-SCTP have been implemented. These implementations as well as an SCTP over IPSec configuration were used to do comparative performance studies in a lab testbed. These experiments show that the S-SCTP concept achieves its design goals. It supports all features and current extensions of SCTP. Furthermore, it avoids the inefficiencies of the other solutions over a wide range of application scenarios and protocol parameter settings

IETF standardization in the field of the Internet of Things (IoT): a survey

Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities

Security for the signaling plane of the SIP protocol

VOIP protocols are gaining greater acceptance amongst both users and service providers. This thesis will aim to examine aspects related to the security of signaling plane of the SIP protocol, one of the most widely used VOIP protocols. Firstly, I will analyze the critical issues related to SIP, then move on to discuss both current and possible future solutions, and finally an assessment of the impact on the performance of HTTP digest authentication, IPsec and TLS, the three main methods use