Contributions to channel modelling and performance estimation of HAPS-based communication systems regarding IEEE Std 802.16TM

New and future telecommunication networks are and will be broadband type. The existing terrestrial and space radio communication infrastructures might be supplemented by new wireless networks that make and will make use of aeronautics-technology. Our study/contribution is referring to radio communications based on radio stations aboard a stratospheric platform named, by ITU-R, HAPS (High Altitude Platform Station). These new networks have been proposed as an alternative technology within the ITU framework to provide various narrow/broadband communication services. With the possibility of having a payload for Telecommunications in an aircraft or a balloon (HAPS), it can be carried out radio communications to provide backbone connections on ground and to access to broadband points for ground terminals. The latest implies a complex radio network planning. Therefore, the radio coverage analysis at outdoors and indoors becomes an important issue on the design of new radio systems. In this doctoral thesis, the contribution is related to the HAPS application for terrestrial fixed broadband communications. HAPS was hypothesised as a quasi-static platform with height above ground at the so-called stratospheric layer. Latter contribution was fulfilled by approaching via simulations the outdoor-indoor coverage with a simple efficient computational model at downlink mode. This work was assessing the ITU-R recommendations at bands recognised for the HAPS-based networks. It was contemplated the possibility of operating around 2 GHz (1820 MHz, specifically) because this band is recognised as an alternative for HAPS networks that can provide IMT-2000 and IMT-Advanced services. The global broadband radio communication model was composed of three parts: transmitter, channel, and receiver. The transmitter and receiver parts were based on the specifications of the IEEE Std 802.16TM-2009 (with its respective digital transmission techniques for a robust-reliable link), and the channel was subjected to the analysis of radio modelling at the level of HAPS and terrestrial (outdoors plus indoors) parts. For the channel modelling was used the two-state characterisation (physical situations associated with the transmitted/received signals), the state-oriented channel modelling. One of the channel-state contemplated the environmental transmission situation defined by a direct path between transmitter and receiver, and the remaining one regarded the conditions of shadowing. These states were dependent on the elevation angle related to the ray-tracing analysis: within the propagation environment, it was considered that a representative portion of the total energy of the signal was received by a direct or diffracted wave, and the remaining power signal was coming by a specular wave, to last-mentioned waves (rays) were added the scattered and random rays that constituted the diffuse wave. At indoors case, the variations of the transmitted signal were also considering the following matters additionally: the building penetration, construction material, angle of incidence, floor height, position of terminal in the room, and indoor fading; also, these indoors radiocommunications presented different type of paths to reach the receiver: obscured LOS, no LOS (NLOS), and hard NLOS. The evaluation of the feasible performance for the HAPS-to-ground terminal was accomplished by means of thorough simulations. The outcomes of the experiment were presented in terms of BER vs. Eb/N0 plotting, getting significant positive conclusions for these kind of system as access network technology based on HAPS

Investigation of Techniques for Reducing Mobile Communication Systems Harmful Out-Of-Band Emission

Electromagnetic compatibility in the newly designated Long-Term Evolution (LTE) mobile network in the 790–862 MHz frequency band from perspective of interference management between neighbouring services are analysed in the dissertation. Main focal point of this dissertation is on the problems that face LTE networks based on Orthogonal Frequency-Division Multiplexing (OFDM) due to the relatively strong side lobes around the active subcarriers in the main communication channel, which introduces interference effects between LTE stations and other services. The introductory chapter presents the investigated problem, objects of research, importance of the dissertation, describes research methodology, scientific novelty and the defended statements. The situation in the 790–862 MHz frequency band is overviewed regarding most sensitive challenges in the first chapter: LTE stations’ influence on Short-Range Devices (SRD), digital terrestrial TV broadcasting (DVB-T) and aeronautical radio navigation systems (ARNS). The noticeable lack of information is observed regarding SRD and LTE electromagnetic compatibility. The Filter Bank Multicarrier Transmission technique (FBMC) is pro-posed as means to minimize adjacent band interference in the 790–862 MHz frequency band. Main FBMC benefits are presented through comparison with reference case of OFDM. The key advantage of FBMC technique is derived from its low out-of-band leakage, which guarantees minimum harmful interference level between stations using adjacent channels. The harmful interference of LTE mobile stations’ influence on Short-Range Devices operating in the 863–870 MHz frequency band is analysed in the second chapter. Two analysis methods are used in this study: first applying theoretical analysis using Minimum Coupling Loss calculations, then statistical Monte-Carlo in order to verify results obtained in theoretical approach. The third chapter is focused on the experimental analysis to reproduce the situation that was investigated in theoretical analysis chapter. Verification of theoretical analysis by practical measurements confirmed that the LTE user equipment (UE) emissions may affect SRD devices and completely or partially disrupt their communications at distances of up to several meters from LTE UE. The obtained results are summarized and general conclusions are drawn

Enabling Technologies for Internet of Things: Licensed and Unlicensed Techniques

The Internet of Things (IoT) is a novel paradigm which is shaping the evolution of the future Internet. According to the vision underlying the IoT, the next step in increasing the ubiquity of the Internet, after connecting people anytime and everywhere, is to connect inanimate objects. By providing objects with embedded communication capabilities and a common addressing scheme, a highly distributed and ubiquitous network of seamlessly connected heterogeneous devices is formed, which can be fully integrated into the current Internet and mobile networks, thus allowing for the development of new intelligent services available anytime, anywhere, by anyone and anything. Such a vision is also becoming known under the name of Machine-to-Machine (M2M), where the absence of human interaction in the system dynamics is further emphasized. A massive number of wireless devices will have the ability to connect to the Internat through the IoT framework. With the accelerating pace of marketing such framework, the new wireless communications standards are studying/proposing solutions to incorporate the services needed for the IoT. However, with an estimate of 30 billion connected devices, a lot of challenges are facing the current wireless technology. In our research, we address a variety of technology candidates for enabling such a massive framework. Mainly, we focus on the nderlay cognitive radio networks as the unlicensed candidate for IoT. On the other hand, we look into the current efforts done by the standardization bodies to accommodate the requirements of the IoT into the current cellular networks. Specifically, we survey the new features and the new user equipment categories added to the physical layer of the LTE-A. In particular, we study the performance of a dual-hop cognitive radio network sharing the spectrum of a primary network in an underlay fashion. In particular, the cognitive network consists of a source, a destination, and multiple nodes employed as amplify-and-forward relays. To improve the spectral efficiency, all relays are allowed to instantaneously transmit to the destination over the same frequency band. We present the optimal power allocation that maximizes the received signal-to-noise ratio (SNR) at the destination while satisfying the interference constrains of the primary network. The optimal power allocation is obtained through an eigen-solution of a channel-dependent matrix, and is shown to transform the transmission over the non-orthogonal relays into parallel channels. Furthermore, while the secondary destination is equipped with multiple antennas, we propose an antenna selection scheme to select the antenna with the highest SNR. To this end, we propose a clustering scheme to subgroup the available relays and use antenna selection at the receiver to extract the same diversity order. We show that random clustering causes the system to lose some of the available degrees of freedom. We provide analytical expression of the outage probability of the system for the random clustering and the proposed maximum-SNR clustering scheme with antenna selection. In addition, we adapt our design to increase the energy-efficiency of the overall network without significant loss in the data rate. In the second part of this thesis, we will look into the current efforts done by the standardization bodies to accommodate the equirements of the IoT into the current cellular networks. Specifically, we present the new features and the new user equipment categories added to the physical layer of the LTE-A. We study some of the challenges facing the LTE-A when dealing with Machine Type communications (MTC). Specifically, the MTC Physical Downlink control channel (MPDCCH) is among the newly introduced features in the LTE-A that carries the downlink control information (DCI) for MTC devices. Correctly decoding the PDCCH, mainly depends on the channel estimation used to compensate for the channel errors during transmission, and the choice of such technique will affect both the complexity and the performance of the user equipment. We propose and assess the performance of a simple channel estimation technique depends in essence on the Least Squares (LS) estimates of the pilots signal and linear interpolations for low-Doppler channels associated with the MTC application

Performance evaluation of a 40 GHz broadband cellular system

Doutoramento em Engenharia ElectrónicaO trabalho apresentado nesta tese enquadra-se na área das comunicações móveis celulares e tem subjacente a utilização de um protótipo de um sistema de comunicações móveis de banda larga desenvolvido no âmbito do projecto Europeu SAMBA. Este protótipo apresenta como principais características inovadoras as taxas de transmissão, a frequência de operação, a mobilidade e os protocolos de handover rádio. Inicialmente são descritos aspectos relacionados com a evolução das comunicações móveis ao longo do tempo e apresentados conceitos teóricos fundamentais para compreender o comportamento do canal rádio móvel e os mecanismos de propagação. São identificados os tipos de desvanecimento e descritos os vários parâmetros que permitem caracterizar o canal rádio. A descrição do impacto do desvanecimento e as formas de o mitigar são apresentadas para contextualizar o trabalho desenvolvido em termos da especificação do protótipo e as opções escolhidas. As características globais do protótipo são apresentadas o que inclui a descrição do interface rádio, da arquitectura, dos módulos de RF, dos módulos de processamento de banda base, protocolos e algoritmo de transferência rádio. O protótipo foi avaliado em vários cenários com diferentes características. No cenário exterior foi analisada uma rua urbana típica do tipo canyon. Em termos de configuração do sistema foram consideradas e analisadas várias alturas da Estação Base, anglos de inclinação das antenas, várias velocidades da Terminal Móvel, operação com e sem linha de vista e a penetração do sinal rádio em ruas transversais. No cenário interior foram realizados testes similares e medidas relativas às transferências que só foram executadas para este cenário por questões logísticas. Numa primeira abordagem foi analisada a cobertura oferecida por cada célula e posteriormente activada a funcionalidade de transferência. Foram também efectuados estudos com uma única Estação Base cobrindo toda a área. Em termos de caracterização do canal rádio em banda larga são apresentadas medidas da resposta impulsiva para dois cenários interiores e complementados por outros estudos via simulação utilizando uma ferramenta de ray tracing. Nas medidas foi utilizado um método de medição do canal no domínio da frequência. A relação entre o Espalhamento do Atraso e a Banda de Coerência em diferentes cenários foi analisada em detalhe e feita a verificação em termos da violação do limite teórico de Fleury. Como consequência dos tópicos abordados, esta tese apresenta um estudo abrangente de aspectos relacionados com o comportamento do canal rádio na faixa dos 40 GHz e a análise das opções técnicas do protótipo em termos do seu desempenho no âmbito dos sistemas de comunicações móveis 4G.The work presented in this thesis addresses the area of mobile cellular broadband communications and encompasses the utilization of a prototype developed in the framework of the European project SAMBA. This prototype has as main innovative characteristics the transmission rates, the frequency band of operation, the mobility and the radio handover protocols. Initially are described aspects related with the historical evolution of the mobile communications and presented fundamental theoretical concepts to understand the behaviour of the radio channel and the propagation mechanisms. The different types of fading are identified as well as the various parameters that allow the characterisation of the radio channel. The fading impact and its mitigation techniques are presented to contextualise the work developed in terms of the specification of the features implemented in the prototype and the options available. The global characteristic of the prototype are presented namely the radio interface, the architecture, the RF modules, the baseband modules, protocols and the algorithm for the radio handover. The prototype was evaluated in various scenarios with different characteristics. In the outdoor scenario a canyon type street was analysed. Several heights of the Base Station, antenna tilting angles, Mobile Terminal velocities, operation in line-of-sight and non line-of-sight and the penetration of the signal in a transversal street. In the indoor scenario similar measurements were performed. The handover feature was analysed just for this scenario due to logistic reasons. In a first phase the coverage provided by each Base Station was analysed and subsequently activated the handover functionality. Studies using a single Base Station to cover the whole pavilion were also performed. In terms of broadband analysis, channel impulse response measurements were performed using a frequency domain technique in two scenarios and complemented by others analysed only using a ray tracing simulation tool. The relationship between the radio channel Delay Spread and the Coherence Bandwidth was analysed in different scenarios and the possible violation of the Fleury lower bond checked. As a consequence of the several topics covered in this thesis, a deep study of the aspects related with the behaviour of the radio channel in the 40 GHz band and the performance of the technical options implemented in the prototype is presented in the framework of 4G mobile communication systems