3,676 research outputs found
Design and analysis of robust controllers for directional drilling tools
Directional drilling is a very important tool for the development of oil and gas deposits.
Attitude control which enables directional drilling for the efficient placement of the directional drilling tools in petroleum producing zones is reviewed along with the various
engineering requirements or constraints. This thesis explores a multivariable attitude governing plant model as formulated in Panchal et al. (2010) which is used for developing
robust control techniques. An inherent input and measurement delay which accounts for
the plant's dead-time is included in the design of the controllers. A Smith Predictor controller is developed for reducing the effect of this dead-time. The developed controllers
are compared for performance and robustness using structured singular value analysis and
also for their performance indicated by the transient response of the closed loop models. Results for the transient non-linear simulation of the proposed controllers are also
presented. The results obtained indicate that the objectives are satisfactorily achieved
Structural Design of Composite Nonlinear Feedback Control for Nonminimum Phase Linear Systems with Input Saturation
The general design procedure of composite nonlinear feedback (CNF) control does not consider the structure information of the system. As a result, the tuning of the nonlinear feedback gain is very difficult, especially for nonminimum phase systems. In this paper, a novel design method is proposed to construct a CNF control law by using the structure information of the system in a special coordinate basis (SCB) form. First, the system is transformed into the SCB form, in which the system is divided into three parts, i.e., stable zero dynamics part, unstable zero dynamics part, and integration part. For a nonminimuni phase linear system, a virtual linear feedback gain is designed to stabilize the unstable zero dynamics. With this virtual gain, the system can be transformed to an integration system which is connected to a stable system. Then, the CNF control law is tuned only for the integration part of the system. Since the target system is an integration system, the proposed method simplifies the tuning of the nonlinear function in the CNF design
Controllers, observers, and applications thereof
Controller scaling and parameterization are described. Techniques that can be improved by employing the scaling and parameterization include, but are not limited to, controller design, tuning and optimization. The scaling and parameterization methods described here apply to transfer function based controllers, including PID controllers. The parameterization methods also apply to state feedback and state observer based controllers, as well as linear active disturbance rejection (ADRC) controllers. Parameterization simplifies the use of ADRC. A discrete extended state observer (DESO) and a generalized extended state observer (GESO) are described. They improve the performance of the ESO and therefore ADRC. A tracking control algorithm is also described that improves the performance of the ADRC controller. A general algorithm is described for applying ADRC to multi-input multi-output systems. Several specific applications of the control systems and processes are disclosed
Nonovershooting and nonundershooting exact output regulation
We consider the classic problem of exact output regulation for a linear time invariant plant. Under the assumption that either a state feedback or measurement feedback output regulator exists, we give design methods to obtain a regulator that avoids overshoot and undershoot in the transient response
Composite nonlinear feedback control for systems with actuator saturation - Towards improved tracking performance
Ph.DDOCTOR OF PHILOSOPH
Recommended from our members
High performance disturbance observer based control system design for permanent magnet synchronous AC machine applications
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonAn electrical machine is one of the main workforces in different industries and serves them in various applications. Machine drive control design involves many technical issues for efficient and robust exploitation. Over several decades, Permanent Magnet Synchronous Motor (PMSM) is getting preferred for industrial applications over its counterpart Squirrel Cage Induction Motor (SCIM) drive, because of their higher efficiency, power density, and higher torque to inertia ratio.
In the prospective that PMSM drives are considered the drives of the future, there are still technical challenges and issues related to PMSM control. Many studies have been devoted to PMSM control in the past, but there are still some open research areas that bring worldwide researchers’ interests back to PMSM drive control. One of the approaches that may facilitate better performance, higher efficiency, and robust and reliable work of the control system is the disturbance observer-based control (DOBC) with linear and nonlinear output feedback control for PM synchronous machine applications. DOBC is adopted due to its ability to reject external and internal disturbances with improving tracking performance in the variable speed wind energy conversion system (WECS) to maximize power extraction. The high order disturbance observer (HODO) is utilized to estimate the aerodynamic torque-based wind speed without the use of a traditional anemometer, which reduces the overall cost and improves the reliability of the whole system. Also, this method has been designed to improve the angular shaft speed tracking of the PMSM system under load torque disturbance and speed variations.
The model-based linear and nonlinear feedback control are used in the proposed control systems. The sliding mode control (SMC) with switching output feedback control law and integral SMC with linear feedback and state-dependent Riccati equation (SDRE) based approaches have been designed for the systems. The SDRE control accounts for the nonlinear multivariable structure of the WECS and is approximated with Taylor series expansion terms. The chattering inherited from SMC is eliminated by the continuous approximation technique. The sliding mode is guaranteed by eliminating the reaching mode in the proposed integral SMC. The model-free cascaded linear feedback control system based on the proportional-integral (PI) controllers use a back-calculation algorithm anti-windup scheme. The proposed speed controllers are synthesized with HODO to compensate for the external disturbance, model uncertainty, noise, and modelling errors. Moreover, servomechanism-based SDRE control, a near-optimal control system is designed to suppress the model uncertainty and noise without the use of disturbance observers.
The proposed control systems for PMSM speed regulation have demonstrated a significant improvement in the angular shaft speed-tracking performance at the transients. Their performances have been tested under speed, load torque variations, and model uncertainty. For example, HODO-based SMC with switching output feedback control law (SOFCL) has demonstrated improvement by more than 78% than the PI-PI control system of the PMSM. The performance of the HODOs-based Integral SMC with SDRE nonlinear feedback is improved by 80.5% under external disturbance, model uncertainty, and noise than Integral SMC with linear feedback in the WECS. The HODO-based SDRE control with servomechanism has shown an 80.2% improvement of mean absolute percentage error under disturbances than Integral SMC with linear feedback in the WECS. The PMSM speed tracking performance of the proposed HODO-based discrete-time PI-PI control system with back-calculation algorithm anti-windup scheme is improved by 87.29% and 90.2% in the speed commands and load torque disturbance variations scenarios respectively. The simulations for testing the proposed control system of the PMSM system and WECS have been implemented in Matlab/Simulink environment. The PMSM speed control experimental results have been obtained with Lucas-Nuelle DSP-based rapid control prototyping kit.Center for International Program “Bolashak” of the Ministry of Education and Science Republic of Kazakhsta
Speed Control of DC Motor using Composite Nonlinear Feedback Control
This paper presents the design of the composite nonlinear feedback (CNF) control law for DC motor speed control. First, a linear feedback control law is designed such that the closed-loop system under this linear control law has small damping ratio. Then, a nonlinear feedback part is designed based on this linear feedback law. The nonlinear function of the nonlinear feedback part is tuned by formulating the parameter tuning problem into a minimization problem. The minimization problem is solved by Hooke-Jeeves algorithm. The well designed CNF control law results in a satisfied transient performance with small overshoot, and fast rising time and settling time
Robust nonlinear control of vectored thrust aircraft
An interdisciplinary program in robust control for nonlinear systems with applications to a variety of engineering problems is outlined. Major emphasis will be placed on flight control, with both experimental and analytical studies. This program builds on recent new results in control theory for stability, stabilization, robust stability, robust performance, synthesis, and model reduction in a unified framework using Linear Fractional Transformations (LFT's), Linear Matrix Inequalities (LMI's), and the structured singular value micron. Most of these new advances have been accomplished by the Caltech controls group independently or in collaboration with researchers in other institutions. These recent results offer a new and remarkably unified framework for all aspects of robust control, but what is particularly important for this program is that they also have important implications for system identification and control of nonlinear systems. This combines well with Caltech's expertise in nonlinear control theory, both in geometric methods and methods for systems with constraints and saturations
- …