Distributed Fiber Ultrasonic Sensor and Pattern Recognition Analytics

Ultrasound interrogation and structural health monitoring technologies have found a wide array of applications in the health care, aerospace, automobile, and energy sectors. To achieve high spatial resolution, large array electrical transducers have been used in these applications to harness sufficient data for both monitoring and diagnoses. Electronic-based sensors have been the standard technology for ultrasonic detection, which are often expensive and cumbersome for use in large scale deployments. Fiber optical sensors have advantageous characteristics of smaller cross-sectional area, humidity-resistance, immunity to electromagnetic interference, as well as compatibility with telemetry and telecommunications applications, which make them attractive alternatives for use as ultrasonic sensors. A unique trait of fiber sensors is its ability to perform distributed acoustic measurements to achieve high spatial resolution detection using a single fiber. Using ultrafast laser direct-writing techniques, nano-reflectors can be induced inside fiber cores to drastically improve the signal-to-noise ratio of distributed fiber sensors. This dissertation explores the applications of laser-fabricated nano-reflectors in optical fiber cores for both multi-point intrinsic Fabry–Perot (FP) interferometer sensors and a distributed phase-sensitive optical time-domain reflectometry (φ-OTDR) to be used in ultrasound detection. Multi-point intrinsic FP interferometer was based on swept-frequency interferometry with optoelectronic phase-locked loop that interrogated cascaded FP cavities to obtain ultrasound patterns. The ultrasound was demodulated through reassigned short time Fourier transform incorporating with maximum-energy ridges tracking. With tens of centimeters cavity length, this approach achieved 20kHz ultrasound detection that was finesse-insensitive, noise-free, high-sensitivity and multiplex-scalability. The use of φ-OTDR with enhanced Rayleigh backscattering compensated the deficiencies of low inherent signal-to-noise ratio (SNR). The dynamic strain between two adjacent nano-reflectors was extracted by using 3×3 coupler demodulation within Michelson interferometer. With an improvement of over 35 dB SNR, this was adequate for the recognition of the subtle differences in signals, such as footstep of human locomotion and abnormal acoustic echoes from pipeline corrosion. With the help of artificial intelligence in pattern recognition, high accuracy of events’ identification can be achieved in perimeter security and structural health monitoring, with further potential that can be harnessed using unsurprised learning

Contributions to the development of distributed sensors based on stimulated Brillouin scattering

RESUMEN: El objetivo principal de esta tesis es contribuir al desarrollo y la mejora del rendimiento de los sensores distribuidos basados en la dispersión Brillouin. Durante el desarrollo de este trabajo se han considerado diferentes áreas de mejora. En primer lugar, se han propuesto diversas configuraciones experimentales para superar algunas de las limitaciones típicas que tienen estos sensores, como son los efectos no locales en los sensores BOTDA o la aparición de sub-picos en el espectro de ganancia de Brillouin en sistemas basados en el dominio de frecuencia. Otro objetivo principal de este trabajo es aplicar diferentes enfoques de procesado para resolver problemáticas aún no resueltas, como la discriminación entre las medidas de temperatura y las de deformación obtenidas con los sensores Brillouin. Además, también se han estudiado algunos métodos alternativos al método tradicional basado en la aplicación de ajustes Lorentzianos para estimar el cambio de la frecuencia Brillouin. Finalmente, este trabajo también ha tratado de contribuir a la validación de los conocimientos adquiridos mediante la validación en escenarios reales, como aplicaciones de alta temperatura o detección de fugas en tuberías.ABSTRACT: The main objective of this thesis dissertation is to contribute to the development and improvement in the performance of distributed sensors based on Brillouin scattering. Different areas of improvement have been considered during the development of this work. First of all, various different experimental configurations have been proposed to overcome some traditional limitations of these sensors, such as non-local effects on Brillouin optical time domain analysis (BOTDA) sensors or appearance of sub-peaks on the Brillouin gain measured with systems based on the frequency domain. Another main objective of this work is applying different processing approaches in an attempt to solve open problems such as the discrimination between temperature and strain measurements obtained with Brillouin sensors. Additionally, it would be interesting to provide some faster and alternative methods to estimate the Brillouin shift in comparison to traditional method based on applying Lorentzian fittings. Finally, this work has also tried to contribute to the validation of the acquired knowledge by performing validations in real scenarios, such as high-temperature applications or leakage detection in pipelines.This work has been supported by the funding of the following entities and actions: • Universidad de Cantabria through the research grant Programa de Personal Investigador en Formación Predoctoral and research stays grants in Pamplona, Spain and in Aversa, Italy. • Agencia Estatal de Investigación through research project Sensores fotónicos para seguirdad y protección (TEC2016-76021-C2-2-R). • Ministerio de Economía y Competitividad through research project Sensores de fibra óptica para seguirdad y protección (TEC2013-47264-C2-1-R). • Gobierno de Cantabria through research project Detección de fugas en autovías del agua mediante sensores ópticos (FASO). • Fundación TTI through a research grant Patrocinio de actividades formativas en investigación científica y técnica. • Cost action td1001: Novel and reliable optical fibre sensor systems for future security and safety applications (OFSESA) through a research grant for a short term scientific mission to Aversa, Italy and through two grants for summer schools

Parameter Identification with Unknown Input and Incomplete Measurements

Ph.DDOCTOR OF PHILOSOPH

Space Communications: Theory and Applications. Volume 3: Information Processing and Advanced Techniques. A Bibliography, 1958 - 1963

Annotated bibliography on information processing and advanced communication techniques - theory and applications of space communication