Particle swarm optimization training algorithm for ANNs in stage prediction of Shing Mun River

Author name used in this publication: K. W. Chau2006-2007 > Academic research: refereed > Publication in refereed journalAccepted ManuscriptPublishe

Investigation on Mlp Artificial Neural Network Using FPGA For Autonomous Cart Follower System

Dengan kos alat pengesan yang semakin rendah, masa depan sistem pedati pengikut autonomi akan dilengkapi dengan lebih banyak alat pengesan. Ini menjadi cabaran rekabentuk dalam mengendalikan data besar dan kerumitan perkukuhan. Kebanyakan sistem yang sedia ada menggunakan papan mikropengawal yang mempunyai prestasi yang terhad dan pengembangan tidak mungkin tanpa penggantian yang lebih baru. Projek ini mencadangkan perlaksanaan alternatif sistem pedati pengikut autonomi dengan model rangkaian neural MLP menggunakan FPGA. Sistem pedati pengikut autonomi yang mengguakan papan mikropengawal telah diubah suai untuk menggunakan papan FPGA dan dilaksanakan melalui Sistem pada Chip (SOC). System rangkaian neural dilatih dalam simulasi dengan vektor latihan yang dikumpul daripada sistem pedati pengikut autonomi yang sedia ada. System rangkaian neural kemudian dilaksanakan sebagai perkukuhan dalam SOC itu. Dalam pemerhatian, jejak perkukuhan model rangkaian neural kekal saiz kecil tanpa mengira saiz rangkaian neural. Hasil kajian menunjukkan bahawa dengan penggunaan sumber tambahan sebanyak 40%, penambahbaikan sistem secara keseluruhan sebanyak 27 kali dicapai dengan penggunaan blok pecutan perkakasan di SOC, berbanding dengan SOC tanpa penggunaan blok pecutan perkakasan. ________________________________________________________________________________________________________________________ The future of the autonomous cart follower system will equipped with lots of sensory data, due to the ever lower cost of sensory device. This provides design challenge on handling large data and firmware complexity. Most of the existing systems are implemented via usage of microcontroller board, which has limited performance and expansion is not possible without replacement of newer board. The project proposes an alternative approach of running the autonomous cart follower systems on neural network model using Field Programmable Gates Array (FPGA). A microcontroller based autonomous cart follower systems is modified to use the FPGA board and implemented via the System on Chip (SOC) approach. The neural network is trained offline in simulation tools with training vector collected from running the existing autonomous cart follower systems. The trained neural network model then implemented as software code in the SOC. By observation the firmware footprint of the neural network model remains small size regardless of the neural network size. The result shows that with 40% more additional resource utilization, the overall system improvement of 27 times is achieved with the usage of hardware acceleration block in SOC compared to SOC without hardware acceleration

The design of an indirect method for the human presence monitoring in the intelligent building

This article describes the design and verification of the indirect method of predicting the course of CO2 concentration (ppm) from the measured temperature variables Tindoor (degrees C) and the relative humidity rH(indoor) (%) and the temperature T-outdoor (degrees C) using the Artificial Neural Network (ANN) with the Bayesian Regulation Method (BRM) for monitoring the presence of people in the individual premises in the Intelligent Administrative Building (IAB) using the PI System SW Tool (PI-Plant Information enterprise information system). The CA (Correlation Analysis), the MSE (Root Mean Squared Error) and the DTW (Dynamic Time Warping) criteria were used to verify and classify the results obtained. Within the proposed method, the LMS adaptive filter algorithm was used to remove the noise of the resulting predicted course. In order to verify the method, two long-term experiments were performed, specifically from February 1 to February 28, 2015, from June 1 to June 28, 2015 and from February 8 to February 14, 2015. For the best results of the trained ANN BRM within the prediction of CO2, the correlation coefficient R for the proposed method was up to 92%. The verification of the proposed method confirmed the possibility to use the presence of people of the monitored IAB premises for monitoring. The designed indirect method of CO2 prediction has potential for reducing the investment and operating costs of the IAB in relation to the reduction of the number of implemented sensors in the IAB within the process of management of operational and technical functions in the IAB. The article also describes the design and implementation of the FEIVISUAL visualization application for mobile devices, which monitors the technological processes in the IAB. This application is optimized for Android devices and is platform independent. The application requires implementation of an application server that communicates with the data server and the application developed. The data of the application developed is obtained from the data storage of the PI System via a PI Web REST API (Application Programming Integration) client.Web of Science8art. no. 2

Automatic detection of pipe-flange reflections in GPR data sections using supervised learning

Ground Penetrating radar (GPR) is a method widely used to study the near-surface subsoil. Many GPR applications require the acquisition of large volumes of data. In these cases, the processing and analysis of the data involve considerable amounts of time and human effort, and the possibility of errors increases. Considering this, the implementation of dependable methods for the automatic detection of GPR response-patterns of the targeted structures becomes clear, because they can contribute to the efficiency and reliability of the interpretation. In this work, we present three methods for automatic detection of pipe-flange signals in constant-offset reflection-GPR images. These methods were obtained using well-known supervised machine learning techniques, and data acquired during a previous study of an extensive section of a pipeline. The first two methods are based on support vector machines (SVM), combined with the image descriptors local binary patterns (LBP) and histogram of oriented gradients (HOG), and the third, on artificial neural networks (ANN). The training and validation of these types of algorithms require large numbers of positive and negative samples. From the mentioned study, we had only 16 experimental flange-patterns. Then, in this work, they were taken as references, together with available documentation on the geometry and materials of the pipe and flanges, for building a broad database of synthetic patterns corresponding to different depths of the pipe and characteristics of the environment. These patterns constitute the set of positive samples used for training and validation. They were also used for the final test of the algorithms. The negative samples for the three stages were directly extracted from the profiles. The results obtained indicate the usefulness of the proposed methodologies to identify the flanges. The best performance corresponded to the ANN, closely followed by SVM combined with HOG, and finally SVM with LBP. In particular, the ANN provided rates of false positive (FP) predictions for the validation and test samples of about 3%, and rates of false negative (FN) predictions of 1.67% for the validation samples and 18.75% for the test samples. Greater FN rates for the test experimental samples, in comparison to those obtained for the validation synthetic samples, were also observed for both SVM algorithms. The detection failures mainly originated in that some complex features of the experimental flange responses could not be appropriately reproduced through the performed numerical simulations, and therefore, some of the patterns were not satisfactorily represented in the sets of positive samples used for training and validation. A first option to improve the results is to obtain a significant number and variety of experimental samples of flange responses and use them to train and validate the algorithms. Other alternatives are to use more sophisticated numerical simulation environments and to find more efficient attributes of the data.Fil: Bordón, Pablo. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Física; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Bonomo, Nestor Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; ArgentinaFil: Martinelli, Hilda Patricia. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Física de Buenos Aires. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Física de Buenos Aires; Argentin

Innovative Techniques for the Retrieval of Earth’s Surface and Atmosphere Geophysical Parameters: Spaceborne Infrared/Microwave Combined Analyses

With the advent of the first satellites for Earth Observation: Landsat-1 in July 1972 and ERS-1 in May 1991, the discipline of environmental remote sensing has become, over time, increasingly fundamental for the study of phenomena characterizing the planet Earth. The goal of environmental remote sensing is to perform detailed analyses and to monitor the temporal evolution of different physical phenomena, exploiting the mechanisms of interaction between the objects that are present in an observed scene and the electromagnetic radiation detected by sensors, placed at a distance from the scene, operating at different frequencies. The analyzed physical phenomena are those related to climate change, weather forecasts, global ocean circulation, greenhouse gas profiling, earthquakes, volcanic eruptions, soil subsidence, and the effects of rapid urbanization processes. Generally, remote sensing sensors are of two primary types: active and passive. Active sensors use their own source of electromagnetic radiation to illuminate and analyze an area of interest. An active sensor emits radiation in the direction of the area to be investigated and then detects and measures the radiation that is backscattered from the objects contained in that area. Passive sensors, on the other hand, detect natural electromagnetic radiation (e.g., from the Sun in the visible band and the Earth in the infrared and microwave bands) emitted or reflected by the object contained in the observed scene. The scientific community has dedicated many resources to developing techniques to estimate, study and analyze Earth’s geophysical parameters. These techniques differ for active and passive sensors because they depend strictly on the type of the measured physical quantity. In my P.h.D. work, inversion techniques for estimating Earth’s surface and atmosphere geophysical parameters will be addressed, emphasizing methods based on machine learning (ML). In particular, the study of cloud microphysics and the characterization of Earth’s surface changes phenomenon are the critical points of this work