764 research outputs found
Deep Visual Foresight for Planning Robot Motion
A key challenge in scaling up robot learning to many skills and environments
is removing the need for human supervision, so that robots can collect their
own data and improve their own performance without being limited by the cost of
requesting human feedback. Model-based reinforcement learning holds the promise
of enabling an agent to learn to predict the effects of its actions, which
could provide flexible predictive models for a wide range of tasks and
environments, without detailed human supervision. We develop a method for
combining deep action-conditioned video prediction models with model-predictive
control that uses entirely unlabeled training data. Our approach does not
require a calibrated camera, an instrumented training set-up, nor precise
sensing and actuation. Our results show that our method enables a real robot to
perform nonprehensile manipulation -- pushing objects -- and can handle novel
objects not seen during training.Comment: ICRA 2017. Supplementary video:
https://sites.google.com/site/robotforesight
Sight to touch: 3D diffeomorphic deformation recovery with mixture components for perceiving forces in robotic-assisted surgery
Robotic-assisted minimally invasive surgical sys-tems suffer from one major limitation which is the lack of interaction forces feedback. The restricted sense of touch hinders the surgeons’ performance and reduces their dexterity and precision during a procedure. In this work, we present a sensory substitution approach that relies on visual stimuli to transmit the tool-tissue interaction forces to the operating surgeon. Our approach combines a 3D diffeomorphic defor-mation mapping with a generative model to precisely label the force level. The main highlights of our approach are that the use of diffeomorphic transformation ensures anatomical structure preservation and the label assignment is based on a parametric form of several mixture elements. We performed experimentations on both ex-vivo and in-vivo datasets and offer careful numerical results evaluating our approach. The results show that our solution has an error measure less than 1mm in all directions and an average labeling error of 2.05%. It can also be applicable to other scenarios that require force feedback such as microsurgery, knot tying or needle-based procedures.Peer ReviewedPostprint (author's final draft
Stability-Guaranteed Reinforcement Learning for Contact-rich Manipulation
Reinforcement learning (RL) has had its fair share of success in contact-rich
manipulation tasks but it still lags behind in benefiting from advances in
robot control theory such as impedance control and stability guarantees.
Recently, the concept of variable impedance control (VIC) was adopted into RL
with encouraging results. However, the more important issue of stability
remains unaddressed. To clarify the challenge in stable RL, we introduce the
term all-the-time-stability that unambiguously means that every possible
rollout will be stability certified. Our contribution is a model-free RL method
that not only adopts VIC but also achieves all-the-time-stability. Building on
a recently proposed stable VIC controller as the policy parameterization, we
introduce a novel policy search algorithm that is inspired by Cross-Entropy
Method and inherently guarantees stability. Our experimental studies confirm
the feasibility and usefulness of stability guarantee and also features, to the
best of our knowledge, the first successful application of RL with
all-the-time-stability on the benchmark problem of peg-in-hole.Comment: Accepted at Robotics and Automation Letter
Task Oriented Programming and Service Algorithms for Smart Robotic Cells
L'abstract è presente nell'allegato / the abstract is in the attachmen
Research on hybrid manufacturing using industrial robot
The applications of using industrial robots in hybrid manufacturing overcome many restrictions of the conventional manufacturing methods, such as small part building size, long building period, and limited material choices. However, some problems such as the uneven distribution of motion accuracy within robot working volume, the acceleration impact of robot under heavy external loads, few methods and facilities for increasing the efficiency of hybrid manufacturing process are still challenging. This dissertation aims to improve the applications of using industrial robot in hybrid manufacturing by addressing following three categories research issues. The first research issue proposed a novel concept view on robot accuracy and stiffness problem, for making the maximum usage of current manufacturing capability of robot system. Based on analyzing the robot forward/inverse kinematic, the angle error sensitivity of different joint and the stiffness matrix properties of robot, new evaluation formulations are established to help finding the best position and orientation to perform a specific trajectory within the robot\u27s working volume. The second research issue focus on the engineering improvements of robotic hybrid manufacturing. By adopting stereo vision, laser scanning technology and curved surface compensation algorithm, it enhances the automation level and adaptiveness of hybrid manufacturing process. The third research issue extends the robotic hybrid manufacturing process to the broader application area. A mini extruder with a variable pitch and progressive diameter screw is developed for large scale robotic deposition. The proposed robotic deposition system could increase the building efficiency and quality for large-size parts. Moreover, the research results of this dissertation can benefit a wide range of industries, such as automation manufacturing, robot design and 3D printing --Abstract, page iv
A continuum robotic platform for endoscopic non-contact laser surgery: design, control, and preclinical evaluation
The application of laser technologies in surgical interventions has been accepted in the clinical
domain due to their atraumatic properties. In addition to manual application of fibre-guided
lasers with tissue contact, non-contact transoral laser microsurgery (TLM) of laryngeal tumours
has been prevailed in ENT surgery. However, TLM requires many years of surgical training
for tumour resection in order to preserve the function of adjacent organs and thus preserve the
patient’s quality of life. The positioning of the microscopic laser applicator outside the patient
can also impede a direct line-of-sight to the target area due to anatomical variability and limit
the working space. Further clinical challenges include positioning the laser focus on the tissue
surface, imaging, planning and performing laser ablation, and motion of the target area during
surgery. This dissertation aims to address the limitations of TLM through robotic approaches and
intraoperative assistance. Although a trend towards minimally invasive surgery is apparent, no
highly integrated platform for endoscopic delivery of focused laser radiation is available to date.
Likewise, there are no known devices that incorporate scene information from endoscopic imaging
into ablation planning and execution. For focusing of the laser beam close to the target tissue, this
work first presents miniaturised focusing optics that can be integrated into endoscopic systems.
Experimental trials characterise the optical properties and the ablation performance. A robotic
platform is realised for manipulation of the focusing optics. This is based on a variable-length
continuum manipulator. The latter enables movements of the endoscopic end effector in five
degrees of freedom with a mechatronic actuation unit. The kinematic modelling and control of the
robot are integrated into a modular framework that is evaluated experimentally. The manipulation
of focused laser radiation also requires precise adjustment of the focal position on the tissue. For
this purpose, visual, haptic and visual-haptic assistance functions are presented. These support
the operator during teleoperation to set an optimal working distance. Advantages of visual-haptic
assistance are demonstrated in a user study. The system performance and usability of the overall
robotic system are assessed in an additional user study. Analogous to a clinical scenario, the
subjects follow predefined target patterns with a laser spot. The mean positioning accuracy of the
spot is 0.5 mm. Finally, methods of image-guided robot control are introduced to automate laser
ablation. Experiments confirm a positive effect of proposed automation concepts on non-contact
laser surgery.Die Anwendung von Lasertechnologien in chirurgischen Interventionen hat sich aufgrund der atraumatischen Eigenschaften in der Klinik etabliert. Neben manueller Applikation von fasergefĂĽhrten
Lasern mit Gewebekontakt hat sich die kontaktfreie transorale Lasermikrochirurgie (TLM) von
Tumoren des Larynx in der HNO-Chirurgie durchgesetzt. Die TLM erfordert zur Tumorresektion
jedoch ein langjähriges chirurgisches Training, um die Funktion der angrenzenden Organe zu
sichern und damit die Lebensqualität der Patienten zu erhalten. Die Positionierung des mikroskopis chen Laserapplikators außerhalb des Patienten kann zudem die direkte Sicht auf das Zielgebiet
durch anatomische Variabilität erschweren und den Arbeitsraum einschränken. Weitere klinische
Herausforderungen betreffen die Positionierung des Laserfokus auf der Gewebeoberfläche, die
Bildgebung, die Planung und AusfĂĽhrung der Laserablation sowie intraoperative Bewegungen
des Zielgebietes. Die vorliegende Dissertation zielt darauf ab, die Limitierungen der TLM durch
robotische Ansätze und intraoperative Assistenz zu adressieren. Obwohl ein Trend zur minimal
invasiven Chirurgie besteht, sind bislang keine hochintegrierten Plattformen fĂĽr die endoskopische
Applikation fokussierter Laserstrahlung verfĂĽgbar. Ebenfalls sind keine Systeme bekannt, die
Szeneninformationen aus der endoskopischen Bildgebung in die Ablationsplanung und -ausfĂĽhrung
einbeziehen. Für eine situsnahe Fokussierung des Laserstrahls wird in dieser Arbeit zunächst
eine miniaturisierte Fokussieroptik zur Integration in endoskopische Systeme vorgestellt. Experimentelle Versuche charakterisieren die optischen Eigenschaften und das Ablationsverhalten. Zur
Manipulation der Fokussieroptik wird eine robotische Plattform realisiert. Diese basiert auf einem
längenveränderlichen Kontinuumsmanipulator. Letzterer ermöglicht in Kombination mit einer
mechatronischen Aktuierungseinheit Bewegungen des Endoskopkopfes in fĂĽnf Freiheitsgraden.
Die kinematische Modellierung und Regelung des Systems werden in ein modulares Framework
eingebunden und evaluiert. Die Manipulation fokussierter Laserstrahlung erfordert zudem eine
präzise Anpassung der Fokuslage auf das Gewebe. Dafür werden visuelle, haptische und visuell haptische Assistenzfunktionen eingeführt. Diese unterstützen den Anwender bei Teleoperation
zur Einstellung eines optimalen Arbeitsabstandes. In einer Anwenderstudie werden Vorteile der
visuell-haptischen Assistenz nachgewiesen. Die Systemperformanz und Gebrauchstauglichkeit
des robotischen Gesamtsystems werden in einer weiteren Anwenderstudie untersucht. Analog zu
einem klinischen Einsatz verfolgen die Probanden mit einem Laserspot vorgegebene Sollpfade. Die
mittlere Positioniergenauigkeit des Spots beträgt dabei 0,5 mm. Zur Automatisierung der Ablation
werden abschließend Methoden der bildgestützten Regelung vorgestellt. Experimente bestätigen
einen positiven Effekt der Automationskonzepte fĂĽr die kontaktfreie Laserchirurgie
Master of Science
thesisUntethered magnetic devices such as magnetic capsule endoscopes, magnetic swimming microrobots, and magnetic screws, as well as tethered magnetic devices such as magnet-tipped catheters and magnet-tipped cochlear-implant electrode arrays, can be actuate
- …