2,463 research outputs found
Self-concatenated code design and its application in power-efficient cooperative communications
In this tutorial, we have focused on the design of binary self-concatenated coding schemes with the help of EXtrinsic Information Transfer (EXIT) charts and Union bound analysis. The design methodology of future iteratively decoded self-concatenated aided cooperative communication schemes is presented. In doing so, we will identify the most important milestones in the area of channel coding, concatenated coding schemes and cooperative communication systems till date and suggest future research directions
Analysis and Design of Tuned Turbo Codes
It has been widely observed that there exists a fundamental trade-off between
the minimum (Hamming) distance properties and the iterative decoding
convergence behavior of turbo-like codes. While capacity achieving code
ensembles typically are asymptotically bad in the sense that their minimum
distance does not grow linearly with block length, and they therefore exhibit
an error floor at moderate-to-high signal to noise ratios, asymptotically good
codes usually converge further away from channel capacity. In this paper, we
introduce the concept of tuned turbo codes, a family of asymptotically good
hybrid concatenated code ensembles, where asymptotic minimum distance growth
rates, convergence thresholds, and code rates can be traded-off using two
tuning parameters, {\lambda} and {\mu}. By decreasing {\lambda}, the asymptotic
minimum distance growth rate is reduced in exchange for improved iterative
decoding convergence behavior, while increasing {\lambda} raises the asymptotic
minimum distance growth rate at the expense of worse convergence behavior, and
thus the code performance can be tuned to fit the desired application. By
decreasing {\mu}, a similar tuning behavior can be achieved for higher rate
code ensembles.Comment: Accepted for publication in IEEE Transactions on Information Theor
Design guidelines for spatial modulation
A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants
Novel Methods in the Improvement of Turbo Codes and their Decoding
The performance of turbo codes can often be improved by improving the weight spectra of such codes. Methods of producing the weight spectra of turbo codes have been investigated and many improvements were made to refine the techniques. A much faster method of weight spectrum evaluation has been developed that allows calculation of weight spectra within a few minutes on a typical desktop PC. Simulation results show that new high performance turbo codes are produced by the optimisation methods presented. The two further important areas of concern are the code itself and the decoding. Improvements of the code are accomplished through optimisation of the interleaver and choice of constituent coders. Optimisation of interleaves can also be accomplished automatically using the algorithms described in this work.
The addition of a CRC as an outer code proved to offer a vast improvement on the overall code performance. This was achieved without any code rate loss as the turbo code is punctured to make way for the CRC remainder. The results show a gain of 0.4dB compared to the non-CRC (1014,676) turbo code.
Another improvement to the decoding performance was achieved through a combination of MAP decoding and Ordered Reliability decoding. The simulations show a performance of just 0.2dB from the Shannon limit. The same code without ordered reliability decoding has a performance curve which is 0.6dB from the Shannon limit. In situations where the MAP decoder fails to converge ordered reliability decoding succeeds in producing a codeword much closer to the received vector, often the correct codeword. The ordered reliability decoding adds to the computational complexity but lends itself to FPGA implementation.Engineering and Physical Sciences Research Council (EPSRC
Packet data communications over coded CDMA with hybrid type-II ARQ
This dissertation presents in-depth investigation of turbo-coded CDNIA systems in packet data communication terminology. It is divided into three parts; (1) CDMA with hybrid FEC/ARQ in deterministic environment, (2) CDMA with hybrid FEC/ARQ in random access environment and (3) an implementation issue on turbo decoding.
As a preliminary, the performance of CDMA with hybrid FEC/ARQ is investigated in deterministic environment. It highlights the practically achievable spectral efficiency of CDMA system with turbo codes and the effect of code rates on the performance of systems with MF and LMMSE receivers, respectively. For given ensemble distance spectra of punctured turbo codes, an improved union bound is used to evaluate the error probability of ML turbo decoder with MF receiver and with LMMSE receiver front-end and, then, the corresponding spectral efficiency is computed as a function of system load.
In the second part, a generalized analytical framework is first provided to analyze hybrid type-11 ARQ in random access environment. When applying hybrid type-11 ARQ, probability of packet success and packet length is generally different from attempt to attempt. Since the conventional analytical model, customarily employed for ALOHA system with pure or hybrid type-I ARQ, cannot be applied for this case, an expanded analytical model is introduced. It can be regarded as a network of queues and Jackson and Burke\u27s theorems can be applied to simplify the analysis. The second part is further divided into two sub topics, i.e. CDMA slotted ALOHA with hybrid type-11 ARQ using packet combining and CDMA unslotted ALOHA with hybrid type-11 ARQ using code combining. For code combining, the rate compatible punctured turbo (RCPT) codes are examined.
In the third part, noticing that the decoding delay is crucial to the fast ARQ, a parallel MAP algorithm is proposed to reduce the computational decoding delay of turbo codes. It utilizes the forward and backward variables computed in the previous iteration to provide boundary distributions for each sub-block MAP decoder. It has at least two advantages over the existing parallel scheme; No performance degradation and No additional computation
Feedback Communication Systems with Limitations on Incremental Redundancy
This paper explores feedback systems using incremental redundancy (IR) with
noiseless transmitter confirmation (NTC). For IR-NTC systems based on {\em
finite-length} codes (with blocklength ) and decoding attempts only at {\em
certain specified decoding times}, this paper presents the asymptotic expansion
achieved by random coding, provides rate-compatible sphere-packing (RCSP)
performance approximations, and presents simulation results of tail-biting
convolutional codes.
The information-theoretic analysis shows that values of relatively close
to the expected latency yield the same random-coding achievability expansion as
with . However, the penalty introduced in the expansion by limiting
decoding times is linear in the interval between decoding times. For binary
symmetric channels, the RCSP approximation provides an efficiently-computed
approximation of performance that shows excellent agreement with a family of
rate-compatible, tail-biting convolutional codes in the short-latency regime.
For the additive white Gaussian noise channel, bounded-distance decoding
simplifies the computation of the marginal RCSP approximation and produces
similar results as analysis based on maximum-likelihood decoding for latencies
greater than 200. The efficiency of the marginal RCSP approximation facilitates
optimization of the lengths of incremental transmissions when the number of
incremental transmissions is constrained to be small or the length of the
incremental transmissions is constrained to be uniform after the first
transmission. Finally, an RCSP-based decoding error trajectory is introduced
that provides target error rates for the design of rate-compatible code
families for use in feedback communication systems.Comment: 23 pages, 15 figure
The Error-Pattern-Correcting Turbo Equalizer
The error-pattern correcting code (EPCC) is incorporated in the design of a
turbo equalizer (TE) with aim to correct dominant error events of the
inter-symbol interference (ISI) channel at the output of its matching Viterbi
detector. By targeting the low Hamming-weight interleaved errors of the outer
convolutional code, which are responsible for low Euclidean-weight errors in
the Viterbi trellis, the turbo equalizer with an error-pattern correcting code
(TE-EPCC) exhibits a much lower bit-error rate (BER) floor compared to the
conventional non-precoded TE, especially for high rate applications. A
maximum-likelihood upper bound is developed on the BER floor of the TE-EPCC for
a generalized two-tap ISI channel, in order to study TE-EPCC's signal-to-noise
ratio (SNR) gain for various channel conditions and design parameters. In
addition, the SNR gain of the TE-EPCC relative to an existing precoded TE is
compared to demonstrate the present TE's superiority for short interleaver
lengths and high coding rates.Comment: This work has been submitted to the special issue of the IEEE
Transactions on Information Theory titled: "Facets of Coding Theory: from
Algorithms to Networks". This work was supported in part by the NSF
Theoretical Foundation Grant 0728676
EXIT charts for system design and analysis
Near-capacity performance may be achieved with the aid of iterative decoding, where extrinsic soft information is exchanged between the constituent decoders in order to improve the attainable system performance. Extrinsic information Transfer (EXIT) charts constitute a powerful semi-analytical tool used for analysing and designing iteratively decoded systems. In this tutorial, we commence by providing a rudimentary overview of the iterative decoding principle and the concept of soft information exchange. We then elaborate on the concept of EXIT charts using three iteratively decoded prototype systems as design examples. We conclude by illustrating further applications of EXIT charts, including near-capacity designs, the concept of irregular codes and the design of modulation schemes
- …