Challenges and Some New Directions in Channel Coding

Three areas of ongoing research in channel coding are surveyed, and recent developments are presented in each area: spatially coupled Low-Density Parity-Check (LDPC) codes, nonbinary LDPC codes, and polar coding.This is the author accepted manuscript. The final version is available from IEEE via http://dx.doi.org/10.1109/JCN.2015.00006

LDPC-coded modulation for transmission over AWGN and flat rayleigh fading channels

La modulation codée est une technique de transmission efficace en largeur de bande qui intègre le codage de canal et la modulation en une seule entité et ce, afin d'améliorer les performances tout en conservant la même efficacité spectrale comparé à la modulation non codée. Les codes de parité à faible densité (low-density parity-check codes, LDPC) sont les codes correcteurs d'erreurs les plus puissants et approchent la limite de Shannon, tout en ayant une complexité de décodage relativement faible. L'idée de combiner les codes LDPC et la modulation efficace en largeur de bande a donc été considérée par de nombreux chercheurs. Dans ce mémoire, nous étudions une méthode de modulation codée à la fois puissante et efficace en largeur de bande, ayant d'excellentes performances de taux d'erreur binaire et une complexité d'implantation faible. Ceci est réalisé en utilisant un encodeur rapide, un décoder de faible complexité et aucun entrelaceur. Les performances du système proposé pour des transmissions sur un canal additif gaussien blanc et un canal à évanouissements plats de Rayleigh sont évaluées au moyen de simulations. Les résultats numériques montrent que la méthode de modulation codée utilisant la modulation d'amplitude en quadrature à M niveaux (M-QAM) peut atteindre d'excellentes performances pour toute une gamme d'efficacité spectrale. Une autre contribution de ce mémoire est une méthode simple pour réaliser une modulation codée adaptative avec les codes LDPC pour la transmission sur des canaux à évanouissements plats et lents de Rayleigh. Dans cette méthode, six combinaisons de paires encodeur modulateur sont employées pour une adaptation trame par trame. L'efficacité spectrale moyenne varie entre 0.5 et 5 bits/s/Hz lors de la transmission. Les résultats de simulation montrent que la modulation codée adaptative avec les codes LDPC offre une meilleure efficacité spectrale tout en maintenant une performance d'erreur acceptable

Repeat-Accumulate構造に基づく直列連接信号符号

電気通信大学201

Finite-Length Scaling Laws for Spatially-Coupled LDPC Codes

This thesis concerns predicting the finite-length error-correcting performance of spatially-coupled low-density parity-check (SC-LDPC) code ensembles over the binary erasure channel. SC-LDPC codes are a very powerful class of codes; their use in practical communication systems, however, requires the system designer to specify a considerable number of code and decoder parameters, all of which affect both the code’s error-correcting capability and the system’s memory, energy, and latency requirements. Navigating the space of the associated trade-offs is challenging. The aim of the finite-length scaling laws proposed in this thesis is to facilitate code and decoder parameter optimization by providing a way to predict the code’s error-rate performance without resorting to Monte-Carlo simulations for each combination of code/decoder and channel parameters.First, we tackle the problem of predicting the frame, bit, and block error rate of SC-LDPC code ensembles over the binary erasure channel under both belief propagation (BP) decoding and sliding window decoding when the maximum number of decoding iterations is unlimited. The scaling laws we develop provide very accurate predictions of the error rates.Second, we derive a scaling law to accurately predict the bit and block error rate of SC-LDPC code ensembles with doping, a technique relevant for streaming applications for limiting the inherent rate loss of SC-LDPC codes. We then use the derived scaling law for code parameter optimization and show that doping can offer a way to achieve better transmission rates for the same target bit error rate than is possible without doping.Last, we address the most challenging (and most practically relevant) case where the maximum number of decoding iterations is limited, both for BP and sliding window decoding. The resulting predictions are again very accurate.Together, these contributions make finite-length SC-LDPC code and decoder parameter optimization via finite-length scaling laws feasible for the design of practical communication systems

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Optimization and Applications of Modern Wireless Networks and Symmetry

Due to the future demands of wireless communications, this book focuses on channel coding, multi-access, network protocol, and the related techniques for IoT/5G. Channel coding is widely used to enhance reliability and spectral efficiency. In particular, low-density parity check (LDPC) codes and polar codes are optimized for next wireless standard. Moreover, advanced network protocol is developed to improve wireless throughput. This invokes a great deal of attention on modern communications

Challenges and some new directions in channel coding

Three areas of ongoing research in channel coding are surveyed, and recent developments are presented in each area: Spatially coupled low-density parity-check (LDPC) codes, nonbinary LDPC codes, and polar coding. © 2015 KICS