11,597 research outputs found
5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments
For the development of new 5G systems to operate in bands up to 100 GHz,
there is a need for accurate radio propagation models at these bands that
currently are not addressed by existing channel models developed for bands
below 6 GHz. This document presents a preliminary overview of 5G channel models
for bands up to 100 GHz. These have been derived based on extensive measurement
and ray tracing results across a multitude of frequencies from 6 GHz to 100
GHz, and this document describes an initial 3D channel model which includes: 1)
typical deployment scenarios for urban microcells (UMi) and urban macrocells
(UMa), and 2) a baseline model for incorporating path loss, shadow fading, line
of sight probability, penetration and blockage models for the typical
scenarios. Various processing methodologies such as clustering and antenna
decoupling algorithms are also presented.Comment: To be published in 2016 IEEE 83rd Vehicular Technology Conference
Spring (VTC 2016-Spring), Nanjing, China, May 201
Preliminary Results on 3D Channel Modeling: From Theory to Standardization
Three dimensional beamforming (3D) (also elevation beamforming) is now
gaining a growing interest among researchers in wireless communication. The
reason can be attributed to its potential to enable a variety of strategies
like sector or user specific elevation beamforming and cell-splitting. Since
these techniques cannot be directly supported by current LTE releases, the 3GPP
is now working on defining the required technical specifications. In
particular, a large effort is currently made to get accurate 3D channel models
that support the elevation dimension. This step is necessary as it will
evaluate the potential of 3D and FD(Full Dimensional) beamforming techniques to
benefit from the richness of real channels. This work aims at presenting the
on-going 3GPP study item "Study on 3D-channel model for Elevation Beamforming
and FD-MIMO studies for LTE", and positioning it with respect to previous
standardization works
Collaborative spectrum sensing optimisation algorithms for cognitive radio networks
The main challenge for a cognitive radio is to detect the existence of primary users reliably in order to minimise the interference to licensed communications. Hence, spectrum sensing is a most important requirement of a cognitive radio. However, due to the channel uncertainties, local observations are not reliable and collaboration among users is required. Selection of fusion rule at a common receiver has a direct impact on the overall spectrum sensing performance. In this paper, optimisation of collaborative spectrum sensing in terms of optimum decision fusion is studied for hard and soft decision combining. It is concluded that for optimum fusion, the fusion centre must incorporate signal-to-noise ratio values of cognitive users and the channel conditions. A genetic algorithm-based weighted optimisation strategy is presented for the case of soft decision combining. Numerical results show that the proposed optimised collaborative spectrum sensing schemes give better spectrum sensing performance
Partner selection in indoor-to-outdoor cooperative networks: an experimental study
In this paper, we develop a partner selection protocol for enhancing the
network lifetime in cooperative wireless networks. The case-study is the
cooperative relayed transmission from fixed indoor nodes to a common outdoor
access point. A stochastic bivariate model for the spatial distribution of the
fading parameters that govern the link performance, namely the Rician K-factor
and the path-loss, is proposed and validated by means of real channel
measurements. The partner selection protocol is based on the real-time
estimation of a function of these fading parameters, i.e., the coding gain. To
reduce the complexity of the link quality assessment, a Bayesian approach is
proposed that uses the site-specific bivariate model as a-priori information
for the coding gain estimation. This link quality estimator allows network
lifetime gains almost as if all K-factor values were known. Furthermore, it
suits IEEE 802.15.4 compliant networks as it efficiently exploits the
information acquired from the receiver signal strength indicator. Extensive
numerical results highlight the trade-off between complexity, robustness to
model mismatches and network lifetime performance. We show for instance that
infrequent updates of the site-specific model through K-factor estimation over
a subset of links are sufficient to at least double the network lifetime with
respect to existing algorithms based on path loss information only.Comment: This work has been submitted to IEEE Journal on Selected Areas in
Communications in August 201
- …