MLP and Elman recurrent neural network modelling for the TRMS

This paper presents a scrutinized investigation on system identification using artificial neural network (ANNs). The main goal for this work is to emphasis the potential benefits of this architecture for real system identification. Among the most prevalent networks are multi-layered perceptron NNs using Levenberg-Marquardt (LM) training algorithm and Elman recurrent NNs. These methods are used for the identification of a twin rotor multi-input multi-output system (TRMS). The TRMS can be perceived as a static test rig for an air vehicle with formidable control challenges. Therefore, an analysis in modeling of nonlinear aerodynamic function is needed and carried out in both time and frequency domains based on observed input and output data. Experimental results are obtained using a laboratory set-up system, confirming the viability and effectiveness of the proposed methodology

Design of a Robust Controller Using Sliding Mode for Two Rotor Aero-Dynamic System: Design of a Robust Controller Using Sliding Mode for Two Rotor Aero-Dynamic System

This paper deals with two rotor aero-dynamic system (TRAS) which is a multi-input multi-output highly coupled nonlinear system, for creating a mathematical model based following the Lagrange’s Equations, and creating controllers for Sliding Mode Control and Linear Quadratic Regulator. The Sliding Manifold is designed by employing the reduced order representation. Linear Quadratic Regulator has been created by linearizing the nonlinear system acquired by creating the state space representation following the mathematical model. The signal tracking conditions of PID, SMC, and LQR have been discussed.  Although the proposed control methodology has perfect actuation time, the tracking efficiency was not satisfactory. Therefore, a rework on the parametrization and introduction of filters, i.e. types of Kalman Filters have been proposed as a conclusion

Modelling and control of a twin rotor MIMO system.

In this research, a laboratory platform which has 2 degrees of freedom (DOF), the Twin Rotor MIMO System (TRMS), is investigated. Although, the TRMS does not fly, it has a striking similarity with a helicopter, such as system nonlinearities and cross-coupled modes. Therefore, the TRMS can be perceived as an unconventional and complex "air vehicle" that poses formidable challenges in modelling, control design and analysis and implementation. These issues are the subject of this work. The linear models for 1 and 2 DOFs are obtained via system identification techniques. Such a black-box modelling approach yields input-output models with neither a priori defined model structure nor specific parameter settings reflecting any physical attributes. Further, a nonlinear model using Radial Basis Function networks is obtained. Such a high fidelity nonlinear model is often required for nonlinear system simulation studies and is commonly employed in the aerospace industry. Modelling exercises were conducted that included rigid as well as flexible modes of the system. The approach presented here is shown to be suitable for modelling complex new generation air vehicles. Modelling of the TRMS revealed the presence of resonant system modes which are responsible for inducing unwanted vibrations. In this research, open-loop, closed-loop and combined open and closed-loop control strategies are investigated to address this problem. Initially, open-loop control techniques based on "input shaping control" are employed. Digital filters are then developed to shape the command signals such that the resonance modes are not overly excited. The effectiveness of this concept is then demonstrated on the TRMS rig for both 1 and 2 DOF motion, with a significant reduction in vibration. The linear model for the 1 DOF (SISO) TRMS was found to have the non-minimum phase characteristics and have 4 states with only pitch angle output. This behaviour imposes certain limitations on the type of control topologies one can ado·pt. The LQG approach, which has an elegant structure with an embedded Kalman filter to estimate the unmeasured states, is adopted in this study. The identified linear model is employed in the design of a feedback LQG compensator for the TRMS with 1 DOF. This is shown to have good tracking capability but requires. high control effort and has inadequate authority over residual vibration of the system. These problems are resolved by further augmenting the system with a command path prefilter. The combined feedforward and feedback compensator satisfies the performance objectives and obeys the constraint on the actuator. Finally, 1 DOF controller is implemented on the laboratory platform

Model Identification and Robust Nonlinear Model Predictive Control of a Twin Rotor MIMO System

PhDThis thesis presents an investigation into a number of model predictive control (MPC) paradigms for a nonlinear aerodynamics test rig, a twin rotor multi-input multi-output system (TRMS). To this end, the nonlinear dynamic model of the system is developed using various modelling techniques. A comprehensive study is made to compare these models and to select the best one to be used for control design purpose. On the basis of the selected model, a state-feedback multistep Newton-type MPC is developed and its stability is addressed using a terminal equality constraint approach. Moreover, the state-feedback control approach is combined with a nonlinear state observer to form an output-feedback MPC. Finally, a robust MPC technique is employed to address the uncertainties of the system. In the modelling stage, analytical models are developed by extracting the physical equations of the system using the Newtonian and Lagrangian approaches. In the case of the black-box modelling, artificial neural networks (ANNs) are utilised to model the TRMS. Finally, the grey-box model is used to enhance the performance of the white-box model developed earlier through the optimisation of parameters using a genetic algorithm (GA) based approach. Stability analysis of the autonomous TRMS is carried out before designing any control paradigms for the system. In the control design stage, an MPC method is proposed for constrained nonlinear systems, which is the improvement of the multistep Newton-type control strategy. The stability of the proposed state-feedback MPC is guaranteed using terminal equality constraints. Moreover, the formerly proposed MPC algorithm is combined with an unscented Kalman filter (UKF) to formulate an output-feedback MPC. An extended Kalman filter (EKF) based on a state-dependent model is also introduced, whose performance is found to be better compared to that of the UKF. Finally, a robust MPC is introduced and implemented on the TRMS based on a polytopic uncertainty that is cast into linear matrix inequalities (LMI)

Contribution to reliable control of dynamic systems

Aplicat embargament des de la data de defensa fins al maig 2020This thesis presents sorne contributions to the field of Health-Aware Control (HAC) of dynamic systems. In the first part of this thesis, a review of the concepts and methodologies related to reliability versus degradation and fault tolerant control versus health-aware control is presented. Firstly, in an attempt to unify concepts, an overview of HAC, degradation, and reliability modeling including some of the most relevant theoretical and applied contributions is given. Moreover, reliability modeling is formalized and exemplified using the structure function, Bayesian networks (BNs) and Dynamic Bayesian networks (DBNs) as modeling tools in reliability analysis. In addition, some Reliability lmportance Measures (RIMs) are presented. In particular, this thesis develops BNs models for overall system reliability analysis through the use of Bayesian inference techniques. Bayesian networks are powerful tools in system reliability assessment due to their flexibility in modeling the reliability structure of complex systems. For the HAC scheme implementation, this thesis presents and discusses the integration of actuators health information by means of RIMs and degradation in Model Predictive Control (MPC) and Linear Quadratic Regulator algorithms. In the proposed strategies, the cost function parameters are tuned using RIMs. The methodology is able to avoid the occurrence of catastrophic and incipient faults by monitoring the overall system reliability. The proposed HAC strategies are applied to a Drinking Water Network (DWN) and a multirotor UAV system. Moreover, a third approach, which uses MPC and restricts the degradation of the system components is applied to a twin rotor system. Finally, this thesis presents and discusses two reliability interpretations. These interpretations, namely instantaneous and expected, differ in the manner how reliability is evaluated and how its evolution along time is considered. This comparison is made within a HAC framework and studies the system reliability under both approaches.Aquesta tesi presenta algunes contribucions al camp del control basat en la salut dels components "Health-Aware Control" (HAC) de sistemes dinàmics. A la primera part d'aquesta tesi, es presenta una revisió dels conceptes i metodologies relacionats amb la fiabilitat versus degradació, el control tolerant a fallades versus el HAC. En primer lloc, i per unificar els conceptes, s'introdueixen els conceptes de degradació i fiabilitat, models de fiabilitat i de HAC incloent algunes de les contribucions teòriques i aplicades més rellevants. La tesi, a més, el modelatge de la fiabilitat es formalitza i exemplifica utilitzant la funció d'estructura del sistema, xarxes bayesianes (BN) i xarxes bayesianes dinamiques (DBN) com a eines de modelat i anàlisi de la fiabilitat com també presenta algunes mesures d'importància de la fiabilitat (RIMs). En particular, aquesta tesi desenvolupa models de BNs per a l'anàlisi de la fiabilitat del sistema a través de l'ús de tècniques d'inferència bayesiana. Les xarxes bayesianes són eines poderoses en l'avaluació de la fiabilitat del sistema gràcies a la seva flexibilitat en el modelat de la fiabilitat de sistemes complexos. Per a la implementació de l?esquema de HAC, aquesta tesi presenta i discuteix la integració de la informació sobre la salut i degradació dels actuadors mitjançant les RIMs en algoritmes de control predictiu basat en models (MPC) i control lineal quadràtic (LQR). En les estratègies proposades, els paràmetres de la funció de cost s'ajusten utilitzant els RIMs. Aquestes tècniques de control fiable permetran millorar la disponibilitat i la seguretat dels sistemes evitant l'aparició de fallades a través de la incorporació d'aquesta informació de la salut dels components en l'algoritme de control. Les estratègies de HAC proposades s'apliquen a una xarxa d'aigua potable (DWN) i a un sistema UAV multirrotor. A més, un tercer enfocament fent servir la degradació dels actuadors com a restricció dins l'algoritme de control MPC s'aplica a un sistema aeri a dos graus de llibertat (TRMS). Finalment, aquesta tesi també presenta i discuteix dues interpretacions de la fiabilitat. Aquestes interpretacions, nomenades instantània i esperada, difereixen en la forma en què s'avalua la fiabilitat i com es considera la seva evolució al llarg del temps. Aquesta comparació es realitza en el marc del control HAC i estudia la fiabilitat del sistema en tots dos enfocaments.Esta tesis presenta algunas contribuciones en el campo del control basado en la salud de los componentes “Health-Aware Control” (HAC) de sistemas dinámicos. En la primera parte de esta tesis, se presenta una revisión de los conceptos y metodologíasrelacionados con la fiabilidad versus degradación, el control tolerante a fallos versus el HAC. En primer lugar, y para unificar los conceptos, se introducen los conceptos de degradación y fiabilidad, modelos de fiabilidad y de HAC incluyendo algunas de las contribuciones teóricas y aplicadas más relevantes. La tesis, demás formaliza y ejemplifica el modelado de fiabilidad utilizando la función de estructura del sistema, redes bayesianas (BN) y redes bayesianas diná-micas (DBN) como herramientas de modelado y análisis de fiabilidad como también presenta algunas medidas de importancia de la fiabilidad (RIMs). En particular, esta tesis desarrolla modelos de BNs para el análisis de la fiabilidad del sistema a través del uso de técnicas de inferencia bayesiana. Las redes bayesianas son herramientas poderosas en la evaluación de la fiabilidad del sistema gracias a su flexibilidad en el modelado de la fiabilidad de sistemas complejos. Para la implementación del esquema de HAC, esta tesis presenta y discute la integración de la información sobre la salud y degradación de los actuadores mediante las RIMs en algoritmos de control predictivo basado en modelos (MPC) y del control cuadrático lineal (LQR). En las estrategias propuestas, los parámetros de la función de coste se ajustan utilizando las RIMs. Estas técnicas de control fiable permitirán mejorar la disponibilidad y la seguridad de los sistemas evitando la aparición de fallos a través de la incorporación de la información de la salud de los componentes en el algoritmo de control. Las estrategias de HAC propuestas se aplican a una red de agua potable (DWN) y a un sistema UAV multirotor. Además, un tercer enfoque que usa la degradación de los actuadores como restricción en el algoritmo de control MPC se aplica a un sistema aéreo con dos grados de libertad (TRMS). Finalmente, esta tesis también presenta y discute dos interpretaciones de la fiabilidad. Estas interpretaciones, llamadas instantánea y esperada, difieren en la forma en que se evalúa la fiabilidad y cómo se considera su evolución a lo largo del tiempo. Esta comparación se realiza en el marco del control HAC y estudia la fiabilidad del sistema en ambos enfoques.Postprint (published version

Contribution to reliable control of dynamic systems

This thesis presents sorne contributions to the field of Health-Aware Control (HAC) of dynamic systems. In the first part of this thesis, a review of the concepts and methodologies related to reliability versus degradation and fault tolerant control versus health-aware control is presented. Firstly, in an attempt to unify concepts, an overview of HAC, degradation, and reliability modeling including some of the most relevant theoretical and applied contributions is given. Moreover, reliability modeling is formalized and exemplified using the structure function, Bayesian networks (BNs) and Dynamic Bayesian networks (DBNs) as modeling tools in reliability analysis. In addition, some Reliability lmportance Measures (RIMs) are presented. In particular, this thesis develops BNs models for overall system reliability analysis through the use of Bayesian inference techniques. Bayesian networks are powerful tools in system reliability assessment due to their flexibility in modeling the reliability structure of complex systems. For the HAC scheme implementation, this thesis presents and discusses the integration of actuators health information by means of RIMs and degradation in Model Predictive Control (MPC) and Linear Quadratic Regulator algorithms. In the proposed strategies, the cost function parameters are tuned using RIMs. The methodology is able to avoid the occurrence of catastrophic and incipient faults by monitoring the overall system reliability. The proposed HAC strategies are applied to a Drinking Water Network (DWN) and a multirotor UAV system. Moreover, a third approach, which uses MPC and restricts the degradation of the system components is applied to a twin rotor system. Finally, this thesis presents and discusses two reliability interpretations. These interpretations, namely instantaneous and expected, differ in the manner how reliability is evaluated and how its evolution along time is considered. This comparison is made within a HAC framework and studies the system reliability under both approaches.Aquesta tesi presenta algunes contribucions al camp del control basat en la salut dels components "Health-Aware Control" (HAC) de sistemes dinàmics. A la primera part d'aquesta tesi, es presenta una revisió dels conceptes i metodologies relacionats amb la fiabilitat versus degradació, el control tolerant a fallades versus el HAC. En primer lloc, i per unificar els conceptes, s'introdueixen els conceptes de degradació i fiabilitat, models de fiabilitat i de HAC incloent algunes de les contribucions teòriques i aplicades més rellevants. La tesi, a més, el modelatge de la fiabilitat es formalitza i exemplifica utilitzant la funció d'estructura del sistema, xarxes bayesianes (BN) i xarxes bayesianes dinamiques (DBN) com a eines de modelat i anàlisi de la fiabilitat com també presenta algunes mesures d'importància de la fiabilitat (RIMs). En particular, aquesta tesi desenvolupa models de BNs per a l'anàlisi de la fiabilitat del sistema a través de l'ús de tècniques d'inferència bayesiana. Les xarxes bayesianes són eines poderoses en l'avaluació de la fiabilitat del sistema gràcies a la seva flexibilitat en el modelat de la fiabilitat de sistemes complexos. Per a la implementació de l?esquema de HAC, aquesta tesi presenta i discuteix la integració de la informació sobre la salut i degradació dels actuadors mitjançant les RIMs en algoritmes de control predictiu basat en models (MPC) i control lineal quadràtic (LQR). En les estratègies proposades, els paràmetres de la funció de cost s'ajusten utilitzant els RIMs. Aquestes tècniques de control fiable permetran millorar la disponibilitat i la seguretat dels sistemes evitant l'aparició de fallades a través de la incorporació d'aquesta informació de la salut dels components en l'algoritme de control. Les estratègies de HAC proposades s'apliquen a una xarxa d'aigua potable (DWN) i a un sistema UAV multirrotor. A més, un tercer enfocament fent servir la degradació dels actuadors com a restricció dins l'algoritme de control MPC s'aplica a un sistema aeri a dos graus de llibertat (TRMS). Finalment, aquesta tesi també presenta i discuteix dues interpretacions de la fiabilitat. Aquestes interpretacions, nomenades instantània i esperada, difereixen en la forma en què s'avalua la fiabilitat i com es considera la seva evolució al llarg del temps. Aquesta comparació es realitza en el marc del control HAC i estudia la fiabilitat del sistema en tots dos enfocaments.Esta tesis presenta algunas contribuciones en el campo del control basado en la salud de los componentes “Health-Aware Control” (HAC) de sistemas dinámicos. En la primera parte de esta tesis, se presenta una revisión de los conceptos y metodologíasrelacionados con la fiabilidad versus degradación, el control tolerante a fallos versus el HAC. En primer lugar, y para unificar los conceptos, se introducen los conceptos de degradación y fiabilidad, modelos de fiabilidad y de HAC incluyendo algunas de las contribuciones teóricas y aplicadas más relevantes. La tesis, demás formaliza y ejemplifica el modelado de fiabilidad utilizando la función de estructura del sistema, redes bayesianas (BN) y redes bayesianas diná-micas (DBN) como herramientas de modelado y análisis de fiabilidad como también presenta algunas medidas de importancia de la fiabilidad (RIMs). En particular, esta tesis desarrolla modelos de BNs para el análisis de la fiabilidad del sistema a través del uso de técnicas de inferencia bayesiana. Las redes bayesianas son herramientas poderosas en la evaluación de la fiabilidad del sistema gracias a su flexibilidad en el modelado de la fiabilidad de sistemas complejos. Para la implementación del esquema de HAC, esta tesis presenta y discute la integración de la información sobre la salud y degradación de los actuadores mediante las RIMs en algoritmos de control predictivo basado en modelos (MPC) y del control cuadrático lineal (LQR). En las estrategias propuestas, los parámetros de la función de coste se ajustan utilizando las RIMs. Estas técnicas de control fiable permitirán mejorar la disponibilidad y la seguridad de los sistemas evitando la aparición de fallos a través de la incorporación de la información de la salud de los componentes en el algoritmo de control. Las estrategias de HAC propuestas se aplican a una red de agua potable (DWN) y a un sistema UAV multirotor. Además, un tercer enfoque que usa la degradación de los actuadores como restricción en el algoritmo de control MPC se aplica a un sistema aéreo con dos grados de libertad (TRMS). Finalmente, esta tesis también presenta y discute dos interpretaciones de la fiabilidad. Estas interpretaciones, llamadas instantánea y esperada, difieren en la forma en que se evalúa la fiabilidad y cómo se considera su evolución a lo largo del tiempo. Esta comparación se realiza en el marco del control HAC y estudia la fiabilidad del sistema en ambos enfoques

Dynamic modelling and control of a flexible manoeuvring system.

In this research a twin rotor multi-input multi-output system (TRMS), which is a laboratory platform with 2 degrees of freedom (DOF) is considered. Although, the TRMS does not fly, it has a striking similarity with a helicopter, such as system nonlinearities and cross-coupled modes. Therefore, the TRMS can be perceived as an unconventional and complex "air vehicle" that poses formidable challenges in modelling, control design and analysis, and implementation. These issues constitute the scope of this research. Linear and nonlinear models for the vertical movement of the TRMS are obtained via system identification techniques using black-box modelling. The approach yields input-output models without a priori defined model structure or specific parameter settings reflecting any physical attributes of the system. Firstly, linear parametric models, characterising the TRMS in its hovering operation mode, are obtained using the potential of recursive least squares (RLS) estimation and genetic algorithms (GAs). Further, a nonlinear model using multi-layer perceptron (MLP) neural networks (NNs) is obtained. Such a high fidelity nonlinear model is often required for nonlinear system simulation studies and is commonly employed in the aerospace industry. Both time and frequency domain analyses are utilised to investigate and develop confidence in the models obtained. The frequency domain verification method is a useful tool in the validation of extracted parametric models. It allows high-fidelity verification of dynamic characteristics over a frequency range of interest. The resulting models are utilized in designing controllers for low frequency vibration suppression, development of suitable feedback control laws for set-point tracking, and design of augmented feedforward and feedback control schemes for both vibration suppression and set-point tracking performance. The modelling approaches presented here are shown to be suitable for modelling complex new generation air vehicles, whose flight mechanics are not well understood. Modelling of the TRMS revealed the presence of resonance modes, which are responsible for inducing unwanted vibrations in the system. Command shaping 11 control strategies are developed to reduce motion and uneven mass induced vibrations, produced by the main rotor during the vertical movement around the lateral axis of the TRMS rig. 2-impulse, 3-impulse and 4-impulse sequence input shapers and Iow-pass and band-stop digital filters are developed to shape the command signals such that the resonance modes are not overly excited. The effectiveness of this concept is then demonstrated in both simulation and real-time experimental environments in terms of level of vibration reduction using power spectral density profiles of the system response. Combinations of intelligent and conventional techniques are commonly used the control of complex dynamic systems. Such hybrid schemes have proved to be efficient and can overcome the deficiencies of conventional and intelligent controllers alone. The current study is confined to the development of two forms of hybrid control schemes that combine fuzzy control and conventional PID compensator for input tracking performance. The two hybrid control strategies comprising conventional PO control plus PlO compensator and PO-type fuzzy control plus PlO compensator are developed and implemented for set-point tracking control of the vertical movement of the TRMS rig. It is observed that the hybrid control schemes are superior to other feedback control strategies namely, PlO compensator, pure PO-type and PI-type fuzzy controllers in terms of time domain system behaviour. This research also witnesses investigations into the development of an augmented feedforward and feedback control scheme (AFFCS) for the control of rigid body motion and vibration suppression of the TRMS. The main goal of this framework is to satisfy performance objectives in terms of robust command tracking, fast system response and minimum residual vibration. The developed control strategies have been designed and implemented within both simulation and real-time environments of the TRMS rig. The employed control strategies are shown to demonstrate acceptable performances. The obtained results show that much improved tracking is achieved on positive and negative cycles of the reference signal, as compared to that without any control action. The system performance with the feedback controller is significantly improved when the feedforward control component is added. This leads to the conclusion that augmenting feedback control with feedforward method can lead to more practical and accurate control of flexible systems such as the TRMS

A recursive LMI-based algorithm for efficient vertex reduction in LPV systems

This paper proposes a new algorithm to reduce the number of gains of a polytopic LPV controller considering generic tuples of vertices, for which a common controller gain can be used. The use of Frobenius norm and the inclusion of the input matrix in the LMIs perturbation matrix allows decreasing the conservativeness to select vertices which are combinable, with respect to a previous approach based on Gershgorin circles. A combinability metric that can be applied to an arbitrary partition of the set of vertices is defined. Then, a recursive algorithm finds a lesser-fragmented combinable partition at each iteration by combining together two elements of a partition. The algorithm aims at finding combinable partitions with minimal cardinality in fewer attempts, always preserving the original control performance specifications. The proposed method is validated using numerical examples, a twin rotor MIMO system and a two-link robotic manipulator.This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482).Peer ReviewedPostprint (author's final draft