Investigation of IGES for CAD/CAE data transfer

In a CAD/CAE facility there is always the possibility that one may want to transfer the design graphics database from the native system to a non-native system. This may occur because of dissimilar systems within an organization or a new CAD/CAE system is to be purchased. The Initial Graphics Exchange Specification (IGES) was developed in an attempt to solve this scenario. IGES is a neutral database format into which the CAD/CAE native database format can be translated to and from. Translating the native design database format to IGES requires a pre-processor and transling from IGES to the native database format requires a post-processor. IGES is an artifice to represent CAD/CAE product data in a neutral environment to allow interfacing applications, archive the database, interchange of product data between dissimilar CAD/CAE systems, and other applications. The intent here is to present test data on translating design product data from a CAD/CAE system to itself and to translate data initially prepared in IGES format to various native design formats. This information can be utilized in planning potential procurement and developing a design discipline within the CAD/CAE community

An application protocol for CAD to CAD transfer of electronic information

The exchange of Computer Aided Design (CAD) information between dissimilar CAD systems is a problem. This is especially true for transferring electronics CAD information such as multi-chip module (MCM), hybrid microcircuit assembly (HMA), and printed circuit board (PCB) designs. Currently, there exists several neutral data formats for transferring electronics CAD information. These include IGES, EDIF, and DXF formats. All these formats have limitations for use in exchanging electronic data. In an attempt to overcome these limitations, the Navy's MicroCIM program implemented a project to transfer hybrid microcircuit design information between dissimilar CAD systems. The IGES (Initial Graphics Exchange Specification) format is used since it is well established within the CAD industry. The goal of the project is to have a complete transfer of microelectronic CAD information, using IGES, without any data loss. An Application Protocol (AP) is being developed to specify how hybrid microcircuit CAD information will be represented by IGES entity constructs. The AP defines which IGES data items are appropriate for describing HMA geometry, connectivity, and processing as well as HMA material characteristics

Considerations for a design and operations knowledge support system for Space Station Freedom

Engineering and operations of modern engineered systems depend critically upon detailed design and operations knowledge that is accurate and authoritative. A design and operations knowledge support system (DOKSS) is a modern computer-based information system providing knowledge about the creation, evolution, and growth of an engineered system. The purpose of a DOKSS is to provide convenient and effective access to this multifaceted information. The complexity of Space Station Freedom's (SSF's) systems, elements, interfaces, and organizations makes convenient access to design knowledge especially important, when compared to simpler systems. The life cycle length, being 30 or more years, adds a new dimension to space operations, maintenance, and evolution. Provided here is a review and discussion of design knowledge support systems to be delivered and operated as a critical part of the engineered system. A concept of a DOKSS for Space Station Freedom (SSF) is presented. This is followed by a detailed discussion of a DOKSS for the Lyndon B. Johnson Space Center and Work Package-2 portions of SSF

NASA/ASEE Summer Faculty Fellowship Program

The contractor's report contains all sixteen final reports prepared by the participants in the 1989 Summer Faculty Fellowship Program. Reports describe research projects on a number of different topics. Interface software, metal corrosion, rocket triggering lightning, automatic drawing, 60-Hertz power, carotid-cardiac baroreflex, acoustic fields, robotics, AI, CAD/CAE, cryogenics, titanium, and flow measurement are discussed

Numerical simulation framework for weakly coupled multiphysical problems in electrical engineering

Every engineering discipline faces the fact of ever-shortening time-to-market windows and development cycles. In order to counteract these, virtual prototyping, simulation and problem optimization are employed in a rapidly increasing number of cases. Yet, the key to efficient problem formulation by professionals still lies in the use of sophisticated simulation software capable of processing numerous diverse design and optimization tasks in a versatile way. More often than not, different tools for different workflows need to be coordinated and interdepend on each others data in the design process chain. When toolchains need to be run multiple times, as it is typically the case in numerical optimization, the lineup overhead tends to be tedious to both man and machine. This paper describes different aspects concerning the design of a software and data framework which tackles the problem of lining up software tools that may be incoherent in terms of data exchange and control mode. The resulting system covers all parts of multiphysical simulation problems that may arise in electrical engineering and its adjoining disciplines as an application of the finite element method

E -commerce for the metal removal industry

The popularity of outsourcing fabrication introduces a problem, namely an inevitable loss of data as information is translated from design to fabrication or from one system to another. Unsatisfactory information, delivered to the outsourcing facility, and inefficient communications between design and fabrication certainly cause enormous economic losses from late product delivery or bad product quality. To overcome these data transferring problems and to improve communications between the design and fabrication sides, a design and manufacturing methodology for custom machined parts in E-Commerce is suggested and implemented in this dissertation. This methodology is based on the idea of a Clean Interface like the Mead-Conway approach for VLSI chip fabrication [MEAD81]. Essential design information for fabricating parts properly with NC (Numerical Controlled) milling machines is expressed in machining/manufacturing features, fabrication friendly terminologies, and is represented by a new language called NCML (Numerical Control Markup Language). NCML is based on XML (Extensible Markup Language)---the document-processing standard proposed by the World Wide Web Consortium (W3C). NCML is designed to include the minimum requisite information necessary for the manufacturer to produce the product. The designer defines NCML, which overcomes geographical separation between design and manufacturing, and minimizes unnecessary interactions caused from lack of information. To prove the possibility of custom machine part fabrication and E-Commerce with NCML, three software systems are implemented. These three systems are FACILE/Design, FACILE/Fabricate, and E-Mill. FACILE is a prototype CAD/CAM system developed to verify NCML feasibility as an Electronic Data Interchange (EDI) format. FACILE/Design is a system based on manufacturing features like holes, contours, and pockets. It can be used to create geometric models, verify the design, and create NCML files. The NCML file is imported by FACILE/Fabricate and turned into G-codes by applying appropriate cutting conditions. Simplified machining simulation and cost estimation tools using NCML inputs are also developed to show some examples of NCML applications that can help design and manufacturing activities. To demonstrate how NCML could be used in a web-based application, an E-Business model called E-Mill has been implemented. E-Mill is a market place for machined parts whose data is encoded in NCML. To make E-Mill a feasible E-Commerce model, two-way communication based on NCML data and the visualization of 3D geometric models in the Virtual Reality Modeling Language (VRML) are equipped with a competitive matchmaking mechanism. In this dissertation, a whole system based on NCML bridges the gap between design and manufacturing. As a part of the NCML validation process for the new system, the pros and cons of NCML design features are discussed. A system for cost estimation is calibrated and compared to real cutting results for the purpose of validation

On flexibly integrating machine vision inspection systems in PCB manufacture

The objective of this research is to advance computer vision techniques and their applications in the electronics manufacturing industry. The research has been carried out with specific reference to the design of automatic optical inspection (AOI) systems and their role in the manufacture of printed circuit boards (PCBs). To achieve this objective, application areas of AOI systems in PCB manufacture have been examined. As a result, a requirement for enhanced performance characteristics has been identified and novel approaches and image processing algorithms have been evolved which can be used within next generation of AOI systems. The approaches are based on gaining an understanding of ways in which manufacturing information can be used to support AOI operations. Through providing information support, an AOI system has access to product models and associated information which can be used to enhance the execution of visual inspection tasks. Manufacturing systems integration, or more accurately controlled access to electronic information, is the key to the approaches. Also in the thesis methods are proposed to achieve the flexible integration of AOI systems (and computer vision systems in general) within their host PCB manufacturing environment. Furthermore, potential applications of information supported AOI systems at various stages of PCB manufacturing have been studied. It is envisaged that more efficient and cost-effective applications of AOI can be attained through adopting the flexible integration methods proposed, since AOI-generated information can now be accessed and utilized by other processes

Amphibious operation simulation.

Since the price of personal computers is coming down, it is possible to have computers in a small ship that has a limited budget. The commanding officer of a small ship needs a support system for making decisions in amphibious operations. A personal computer would be helpful in saving time manipulating the information used to make decisions in amphibious operations.http://archive.org/details/amphibiousoperat00hongLieutenant, Royal Thai NavyApproved for public release; distribution is unlimited