A Modified High Voltage Gain Quasi-Impedance Source Coupled Inductor Multilevel Inverter for Photovoltaic Application

publishedVersio

Analysis, design and investigation on a new single-phase switched quasi Z-source inverter for photovoltaic application

Abstract: This paper addresses the approach to improve the efficiency of the quasi Z-source inverter. In order to increase the efficiency the reduction of conduction losses is one way to approach. Sequentially to decrease the conduction losses in the quasi z-source inverter the replacement of diode is replacing with switches is proposed which is also called as synchronous rectification. The paper represents basics of the approach, analysis and comparison of the power losses of the traditional and proposed designs of the grid connected PV-system with quasi z-source inverter system. The proposed approach validated on the computer simulations in the MATLAB environment

CAPACITANCE REDUCTION USING RIPPLE SUPPRESSION CONTROL OF SINGLE PHASE ENERGY STORED QUASI-Z-SOURCE INVERTER

The energy stored Quasi-Z-source Inverter (qZSI) allows integrate energy storage in addition to the other energy source mainly for output power smoothening. Single phase inverter suffers from double-frequency power ripple in the input side and also in the energy storage that is transferred there from the ac-side. In qZSI must be used large electrolytic dc capacitors in the impedance network to suppress this 100 Hz ripple. Also to suppress this ripple can be applied two types of power decoupling: passive power decoupling and active power decoupling. In this paper is analyzed passive power decoupling that is realized by means of the modified control strategy that produces the time-varying shoot-though duty cycle to mitigate power ripple without deteriorating of the output power quality. The validity of proposed control strategy was confirmed by simulation results that were obtained in PSIM software

A Modified High Voltage Gain Quasi-Impedance Source Coupled Inductor Multilevel Inverter for Photovoltaic Application.

The quasi-impedance source inverters/quasi-Z source inverters (Q-ZSIs) have shown improvement to overwhelmed shortcomings of regular voltage-source inverters (VSIs) and current-source inverters (CSIs) in terms of efficiency and buck-boost type operations. The Q-ZSIs encapsulated several significant merits against conventional ZSIs, i.e., realized buck/boost, inversion and power conditioning in a single power stage with improved reliability. The conventional inverters have two major problems; voltage harmonics and boosting capability, which make it impossible to prefer for renewable generation and general-purpose applications such as drive acceleration. This work has proposed a Q-ZSI with five-level six switches coupled inverter. The proposed Q-ZSI has the merits of operation, reduced passive components, higher voltage boosting capability and high efficiency. The modified space vector pulse width modulation (PWM) developed to achieve the desired control on the impedance network and inverter switching states. The proposed PWM integrates the boosting and regular inverter switching state within one sampling period. The PWM has merits such as reduction of coupled inductor size, total harmonic reduction with enhancing of the fundamental voltage profile. In comparison with other multilevel inverters (MLI), it utilizes only half of the power switch and a lower modulation index to attain higher voltage gain. The proposed inverter dealt with photovoltaic (PV) system for the stand-alone load. The proposed boost inverter topology, operating performance and control algorithm is theoretically investigated and validated through MATLAB/Simulink software and experimental upshots. The proposed topology is an attractive solution for the stand-alone and grid-connected system

Model Predictive Control Technique of Multilevel Inverter for PV Applications

Renewable energy sources, such as solar, wind, hydro, and biofuels, continue to gain popularity as alternatives to the conventional generation system. The main unit in the renewable energy system is the power conditioning system (PCS). It is highly desirable to obtain higher efficiency, lower component cost, and high reliability for the PCS to decrease the levelized cost of energy. This suggests a need for new inverter configurations and controls optimization, which can achieve the aforementioned needs. To achieve these goals, this dissertation presents a modified multilevel inverter topology for grid-tied photovoltaic (PV) system to achieve a lower cost and higher efficiency comparing with the existing system. In addition, this dissertation will also focus on model predictive control (MPC) which controls the modified multilevel topology to regulate the injected power to the grid. A major requirement for the PCS is harvesting the maximum power from the PV. By incorporating MPC, the performance of the maximum power point tracking (MPPT) algorithm to accurately extract the maximum power is improved for multilevel DC-DC converter. Finally, this control technique is developed for the quasi-z-source inverter (qZSI) to accurately control the DC link voltage, input current, and produce a high quality grid injected current waveform compared with the conventional techniques. This dissertation presents a modified symmetrical and asymmetrical multilevel DC-link inverter (MLDCLI) topology with less power switches and gate drivers. In addition, the MPC technique is used to drive the modified and grid connected MLDCLI. The performance of the proposed topology with finite control set model predictive control (FCS-MPC) is verified by simulation and experimentally. Moreover, this dissertation introduces predictive control to achieve maximum power point for grid-tied PV system to quicken the response by predicting the error before the switching signal is applied to the converter. Using the modified technique ensures the iii system operates at maximum power point which is more economical. Thus, the proposed MPPT technique can extract more energy compared to the conventional MPPT techniques from the same amount of installed solar panel. In further detail, this dissertation proposes the FCS-MPC technique for the qZSI in PV system. In order to further improve the performance of the system, FCS-MPC with one step horizon prediction has been implemented and compared with the classical PI controller. The presented work shows the proposed control techniques outperform the ones of the conventional linear controllers for the same application. Finally, a new method of the parallel processing is presented to reduce the time processing for the MPC

A PWM Strategies for diode assisted NPC-MLI to obtain maximum voltage gain for EV Application

Abstract: The projected diode assisted Neutral Point Diode Clamed (NPC-MLI) with the photovoltaic system produces a maximum voltage gain that is comparatively higher than those of other boost conversion techniques. This paper mainly explores vector selection approach pulse-width modulation (PWM) strategies for diode-assisted NPC-MLI to obtain a maximum voltage gain without compromising in waveform quality. To obtain a high voltage gain maximum utilization of dc-link voltage and stress on the power switches must be reduced. From the above issues in the diode assisted NPC-MLI leads to vector selection approach PWM technique to perform capacitive charging in parallel and discharging in series to obtain maximum voltage gain. The operation principle and the relationship of voltage gain versus voltage boost duty ratio and switching device voltage stress versus voltage gain are theoretically investigated in detail. Owing to better performance, diode-assisted NPC-MLI is more promising and competitive topology for wide range DC/AC power conversion in a renewable anergy application. Furthermore, theoretically investigated are validated via simulation and experimental results

Three-phase T-type qZ source inverter with control current associated to a vectorial modulator for photovoltaic applications

This paper presents a fast and robust control system for a three-phase quasi-Z-source inverter (qZSI) connected to the grid. The topology combines two quasi-Z-source networks with a T-type inverter allowing to obtain AC voltages with multilevel characteristics and properties of the referred networks. To control this system a closed-loop current controller for the AC currents is proposed. The controller is based on a vectorial modulator associated to the shoot-through states. The DC-link voltage is maintained stable at the reference value by adjusting the shoot-through duty cycle. The controller is characterized by fast transient response and robustness to parameter and load variations. In order to confirm the desired characteristics and performance of the converter and control system several simulation tests were performed.info:eu-repo/semantics/publishedVersio

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters