Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System

This paper presents the design, development and SIMULINK implementation of the lumped parameter model of C-axis drive from GEISS five-axis CNC machine tool. The simulated results compare well with the experimental data measured from the actual machine. Also the paper describes the steps for data acquisition using ControlDesk and hardware-in-the-loop implementation of the drive models in dSPACE real-time system. The main components of the HIL system are: the drive model simulation and input – output (I/O) modules for receiving the real controller outputs. The paper explains how the experimental data obtained from the data acquisition process using dSPACE real-time system can be used for the development of machine tool diagnosis and prognosis systems that facilitate the improvement of maintenance activities

Dinamički odziv nove adaptivne modificirane povratne Legendrove neuronske mreže upravljanja sinkronim motorom s permanentnim magnetima za električni skuter

Because an electric scooter driven by permanent magnet synchronous motor (PMSM) servo-driven system has the unknown nonlinearity and the time-varying characteristics, its accurate dynamic model is difficult to establish for the design of the linear controller in whole system. In order to conquer this difficulty and raise robustness, a novel adaptive modified recurrent Legendre neural network (NN) control system, which has fast convergence and provide high accuracy, is proposed to control for PMSM servo-driven electric scooter under the external disturbances and parameter variations in this study. The novel adaptive modified recurrent Legendre NN control system consists of a modified recurrent Legendre NN control with adaptation law and a remunerated control with estimation law. In addition, the online parameter tuning methodology of the modified recurrent Legendre NN control and the estimation law of the remunerated control can be derived by using the Lyapunov stability theorem and the gradient descent method. Furthermore, the modified recurrent Legendre NN with variable learning rate is proposed to raise convergence speed. Finally, comparative studies are demonstrated by experimental results in order to show the effectiveness of the proposed control scheme.S obzirom da električni skuter pogonjen servo sustavom sa sinkroni motor s permanentnim magnetima ima nelinearnu dinamiku i vremenski promjenjive parametre, njegov dinamički model nije jednostavno odrediti u svrhu dizajniranja linearnog regulatora. Kako bi se riješio taj problem te povećala robusnost predložen je sustav upravljanja korištenjem adaptivne modificirane povratne Legendrove neuronske mreže za upravljanje skuterom pogonjenim servo sustavom sa sinkronim motorom uz prisustvo vanjskog poremećaja i promjenjivih parametara. Predloženo upravljanje ima brzu konvergenciju i visoku preciznost. Sustav upravljanja sastoji se od modificirane povratne Legendrove neuronske moreže s adaptivnim zakonom upravljanja i estimacijom. Dodatno, \u27on-line\u27 podešavanje parametara takvog sustava može se dobiti korištenjem Ljapunovljevog teorema o stabilnosti sustava i gradijente metode. Modificirana povratne Legendrove neuronska mreža s promjenjivim vremenom učenja predložena je za povećanje brzine konvergencije. Ispravnost predložene sheme upravljanja provjerena je eksperimentalno

Soft Computing Techniques and Their Applications in Intel-ligent Industrial Control Systems: A Survey

Soft computing involves a series of methods that are compatible with imprecise information and complex human cognition. In the face of industrial control problems, soft computing techniques show strong intelligence, robustness and cost-effectiveness. This study dedicates to providing a survey on soft computing techniques and their applications in industrial control systems. The methodologies of soft computing are mainly classified in terms of fuzzy logic, neural computing, and genetic algorithms. The challenges surrounding modern industrial control systems are summarized based on the difficulties in information acquisition, the difficulties in modeling control rules, the difficulties in control system optimization, and the requirements for robustness. Then, this study reviews soft-computing-related achievements that have been developed to tackle these challenges. Afterwards, we present a retrospect of practical industrial control applications in the fields including transportation, intelligent machines, process industry as well as energy engineering. Finally, future research directions are discussed from different perspectives. This study demonstrates that soft computing methods can endow industry control processes with many merits, thus having great application potential. It is hoped that this survey can serve as a reference and provide convenience for scholars and practitioners in the fields of industrial control and computer science

A Review of Control Techniques for Wind Energy Conversion System

Wind energy is the most efficient and advanced form of renewable energy (RE) in recent decades, and an effective controller is required to regulate the power generated by wind energy. This study provides an overview of state-of-the-art control strategies for wind energy conversion systems (WECS). Studies on the pitch angle controller, the maximum power point tracking (MPPT) controller, the machine side controller (MSC), and the grid side controller (GSC) are reviewed and discussed. Related works are analyzed, including evolution, software used, input and output parameters, specifications, merits, and limitations of different control techniques. The analysis shows that better performance can be obtained by the adaptive and soft-computing based pitch angle controller and MPPT controller, the field-oriented control for MSC, and the voltage-oriented control for GSC. This study provides an appropriate benchmark for further wind energy research

An application of modified adaptive bats sonar algorithm (MABSA) on fuzzy logic controller for dc motor accuracy

Controllers are mostly used to improve the control system performance. The works related to controllers attract researchers since the controller can be applied to solve many industrial problems involving speed and position. Fuzzy logic controller (FLC) gains popularity since it is widely used in industrial application. However, the FLC structure is still lacking in terms of the accuracy and time response. Although there are optimization technique used to obtain both accuracy and time response, it is still lacking. Therefore, this research presents works on the FLC system which is the fuzzy inference system that will be optimized by the modified adaptive bats sonar algorithm (MABSA) for the DC servo motor position control. The MABSA will be optimized with the range of the membership input in the FLC. The research aims are to achieve accuracy while minimizing the time response of the DC servo motor. This is done by designing the FLC using the Matlab toolbox. After the FLC is designed completely, the Simulink block diagram for the DC servo motor and FLC are built to see the performance of the controller. The range of the membership function for inputs and outputs will be optimized by the MABSA to get the best positional values. The performance of the developed FLC with the optimized MABSA is verified through the simulation and robustness tests with the system that did not use the FLC and also the system without MABSA. It was demonstrated from the study that the proposed FLC with optimization of MABSA algorithm was able to yield an improvement of 3.8% with respect to the rise time in comparison to other control schemes evaluated. When compared with PSO algorithm, proposed FLC optimized by MABSA showed improvement by 12.5% in rise time and 10% in settling time. PSO-FLC also give 0.6% steady state error compared to the MABSA-FLC. In conclusion, the results validate the better performance in terms of rise time and settling time of the developed FLC that has been optimized by the MABSA

Improved Performance for Stability of Screw down System by implement Fuzzy Logic

Main problem in hydraulic cold rolling industries is the longitudinal strip thickness .In this random disturbance can increase the error of the system. For reduce this type of error ARM9 based gauge control system is design. In this paper screw down system by use of fuzzy logic. After apply fuzzy logic the screw down system is getting more stable. The output response is touching to the step response. Screw down System is getting stable in 1.8 second. DOI: 10.17762/ijritcc2321-8169.15069

A Fast Induction Motor Speed Estimation based on Hybrid Particle Swarm Optimization (HPSO)

AbstractIntelligent control and estimation of power electronic systems by fuzzy logic and neural network techniques with fast torque and flux show tremendous promise in future. This paper proposed the application of Hybrid Particle Swarm Optimization (HPSO) for losses and operating cost minimization control in the induction motor drives. The main advantages of the proposed technique are; its simple structure and its straightforward maximization of induction motor efficiency and its operating cost for a given load torque. As will be demonstrated, Hybrid Particle Swarm Optimization (HPSO) is so efficient in finding the optimum operating machine's flux level. The results demonstrate the good quality and robustness in the system dynamic response and reduction in the steady-state and transient motor ripple torque

Speed control of induction motor using fuzzy recursive least squares technique

Este artículo presenta el diseño de un controlador adaptativo, el sistema de control emplea lógica difusa adaptativa, modos deslizantes y es entrenado con la técnica de mínimos cuadrados recursivos. El problema de la variación de parámetros es resuelto con el controlador adaptativo; se utiliza un regulador interno PI con el cual se produce que el control de velocidad del motor de inducción sea realizado por medio de las corrientes de estator en vez de los voltajes. Se usa el modelo del motor en el sistema de coordenadas de flujo orientado del rotor para el desarrollo y prueba del sistema de control.A simple adaptive controller design is presented in this paper, the control system uses the adaptive fuzzy logic, sliding modes and is trained with the recursive least squares technique. The problem of parameter variation is solved with the adaptive controller; the use of an internal PI regulator produces that the speed control of the induction motor be achieved by the stator currents instead the input voltage. The rotor-flux oriented coordinated system model is used to develop and test the control system