Reliable and Fault-Resilient Schemes for Efficient Radix-4 Complex Division

Complex division is commonly used in various applications in signal processing and control theory including astronomy and nonlinear RF measurements. Nevertheless, unless reliability and assurance are embedded into the architectures of such structures, the suboptimal (and thus erroneous) results could undermine the objectives of such applications. As such, in this thesis, we present schemes to provide complex number division architectures based on (Sweeney, Robertson, and Tocher) SRT-division with fault diagnosis mechanisms. Different fault resilient architectures are proposed in this thesis which can be tailored based on the eventual objectives of the designs in terms of area and time requirements, among which we pinpoint carefully the schemes based on recomputing with shifted operands (RESO) to be able to detect both natural and malicious faults and with proper modification achieve high throughputs. The design also implements a minimized look up table approach which favors in error detection based designs and provides high fault coverage with relatively-low overhead. Additionally, to benchmark the effectiveness of the proposed schemes, extensive fault diagnosis assessments are performed for the proposed designs through fault simulations and FPGA implementations; the design is implemented on Xilinx Spartan-VI and Xilinx Virtex-VI FPGA families

IEEE Compliant Double-Precision FPU and 64-bit ALU with Variable Latency Integer Divider

Together the arithmetic logic unit (ALU) and floating-point unit (FPU) perform all of the mathematical and logic operations of computer processors. Because they are used so prominently, they fall in the critical path of the central processing unit - often becoming the bottleneck, or limiting factor for performance. As such, the design of a high-speed ALU and FPU is vital to creating a processor capable of performing up to the demanding standards of today\u27s computer users. In this paper, both a 64-bit ALU and a 64-bit FPU are designed based on the reduced instruction set computer architecture. The ALU performs the four basic mathematical operations - addition, subtraction, multiplication and division - in both unsigned and two\u27s complement format, basic logic operations and shifting. The division algorithm is a novel approach, using a comparison multiples based SRT divider to create a variable latency integer divider. The floating-point unit performs the double-precision floating-point operations add, subtract, multiply and divide, in accordance with the IEEE 754 standard for number representation and rounding. The ALU and FPU were implemented in VHDL, simulated in ModelSim, and constrained and synthesized using Synopsys Design Compiler (2006.06). They were synthesized using TSMC 0.1 3nm CMOS technology. The timing, power and area synthesis results were recorded, and, where applicable, compared to those of the corresponding DesignWare components.The ALU synthesis reported an area of 122,215 gates, a power of 384 mW, and a delay of 2.89 ns - a frequency of 346 MHz. The FPU synthesis reported an area 84,440 gates, a delay of 2.82 ns and an operating frequency of 355 MHz. It has a maximum dynamic power of 153.9 mW

Design and Implementation of a Radix-100 Division Unit

In this thesis, a novel radix-100 divider is designed and implemented. The proposed divider is 3% faster then the current decimal dividers

Displays, memories, and signal processing: A compilation

Articles on electronics systems and techniques were presented. The first section is on displays and other electro-optical systems; the second section is devoted to signal processing. The third section presented several new memory devices for digital equipment, including articles on holographic memories. The latest patent information available is also given

Improving the Hardware Performance of Arithmetic Circuits using Approximate Computing

An application that can produce a useful result despite some level of computational error is said to be error resilient. Approximate computing can be applied to error resilient applications by intentionally introducing error to the computation in order to improve performance, and it has been shown that approximation is especially well-suited for application in arithmetic computing hardware. In this thesis, novel approximate arithmetic architectures are proposed for three different operations, namely multiplication, division, and the multiply accumulate (MAC) operation. For all designs, accuracy is evaluated in terms of mean relative error distance (MRED) and normalized mean error distance (NMED), while hardware performance is reported in terms of critical path delay, area, and power consumption. Three approximate Booth multipliers (ABM-M1, ABM-M2, ABM-M3) are designed in which two novel inexact partial product generators are used to reduce the dimensions of the partial product matrix. The proposed multipliers are compared to other state-of-the-art designs in terms of both accuracy and hardware performance, and are found to reduce power consumption by up to 56% when compared to the exact multiplier. The function of the multipliers is verified in several image processing applications. Two approximate restoring dividers (AXRD-M1, AXRD-M2) are proposed along with a novel inexact restoring divider cell. In the first divider, the conventional cells are replaced with the proposed inexact cells in several columns. The second divider computes only a subset of the trial subtractions, after which the divisor and partial remainder are rounded and encoded so that they may be used to estimate the remaining quotient bits. The proposed dividers are evaluated for accuracy and hardware performance alongside several benchmarking designs, and their function is verified using change detection and foreground extraction applications. An approximate MAC unit is presented in which the multiplication is implemented using a modified version of ABM-M3. The delay is reduced by using a fused architecture where the accumulator is summed as part of the multiplier compression. The accuracy and hardware savings of the MAC unit are measured against several works from the literature, and the design is utilized in a number of convolution operations

A Study on Efficient Designs of Approximate Arithmetic Circuits

Approximate computing is a popular field where accuracy is traded with energy. It can benefit applications such as multimedia, mobile computing and machine learning which are inherently error resilient. Error introduced in these applications to a certain degree is beyond human perception. This flexibility can be exploited to design area, delay and power efficient architectures. However, care must be taken on how approximation compromises the correctness of results. This research work aims to provide approximate hardware architectures with error metrics and design metrics analyzed and their effects in image processing applications. Firstly, we study and propose unsigned array multipliers based on probability statistics and with approximate 4-2 compressors, full adders and half adders. This work deals with a new design approach for approximation of multipliers. The partial products of the multiplier are altered to introduce varying probability terms. Logic complexity of approximation is varied for the accumulation of altered partial products based on their probability. The proposed approximation is utilized in two variants of 16-bit multipliers. Synthesis results reveal that two proposed multipliers achieve power savings of 72% and 38% respectively compared to an exact multiplier. They have better precision when compared to existing approximate multipliers. Mean relative error distance (MRED) figures are as low as 7.6% and 0.02% for the proposed approximate multipliers, which are better than the previous state-of-the-art works. Performance of the proposed multipliers is evaluated with geometric mean filtering application, where one of the proposed models achieves the highest peak signal to noise ratio (PSNR). Second, approximation is proposed for signed Booth multiplication. Approximation is introduced in partial product generation and partial product accumulation circuits. In this work, three multipliers (ABM-M1, ABM-M2, and ABM-M3) are proposed in which the modified Booth algorithm is approximated. In all three designs, approximate Booth partial product generators are designed with different variations of approximation. The approximations are performed by reducing the logic complexity of the Booth partial product generator, and the accumulation of partial products is slightly modified to improve circuit performance. Compared to the exact Booth multiplier, ABM-M1 achieves up to 15% reduction in power consumption with an MRED value of 7.9 × 10-4. ABM-M2 has power savings of up to 60% with an MRED of 1.1 × 10-1. ABM-M3 has power savings of up to 50% with an MRED of 3.4 × 10-3. Compared to existing approximate Booth multipliers, the proposed multipliers ABM-M1 and ABM-M3 achieve up to a 41% reduction in power consumption while exhibiting very similar error metrics. Image multiplication and matrix multiplication are used as case studies to illustrate the high performance of the proposed approximate multipliers. Third, distributed arithmetic based sum of products units approximation is analyzed. Sum of products units are key elements in many digital signal processing applications. Three approximate sum of products models which are based on distributed arithmetic are proposed. They are designed for different levels of accuracy. First model of approximate sum of products achieves an improvement up to 64% on area and 70% on power, when compared to conventional unit. Other two models provide an improvement of 32% and 48% on area and 54% and 58% on power, respectively, with a reduced error rate compared to the first model. Third model achieves MRED and normalized mean error distance (NMED) as low as 0.05% and 0.009%. Performance of approximate units is evaluated with a noisy image smoothing application, where the proposed models are capable of achieving higher PSNR than existing state of the art techniques. Fourth, approximation is applied in division architecture. Two approximation models are proposed for restoring divider. In the first design, approximation is performed at circuit level, where approximate divider cells are utilized in place of exact ones by simplifying the logic equations. In the second model, restoring divider is analyzed strategically and number of restoring divider cells are reduced by finding the portions of divisor and dividend with significant information. An approximation factor $p$ is used in both designs. In model 1, the design with p=8 has a 58% reduction in both area and power consumption compared to exact design, with a Q-MRED of 1.909 × 10-2 and Q-NMED of 0.449 × 10-2. The second model with an approximation factor p=4 has 54% area savings and 62% power savings compared to exact design. The proposed models are found to have better error metrics compared to existing designs, with better performance at similar error values. A change detection image processing application is used for real time assessment of proposed and existing approximate dividers and one of the models achieves a PSNR of 54.27 dB

Unified S-Band Data Handling System

The data handling portion of the Unified S-Band tracking system consists of three readily separable subsystems. These are: a) the Timing System, b) the Antenna Position Programmer, and c) the Tracking Data Processor. Each of these subsystems is briefly described below

Study of Recursive Divide Architectures and Implementation for Division and Multiplication

Multipliers have been key and critical components for most application-specific and general-purpose computer architectures. However, these architectures have been transitioning towards multiple cores that can process large amounts of data through parallel approaches to computation. Unfortunately, traditional arithmetic functional units that worked well for single-core architectures have the side effect of incurring large amounts of area and power. Consequently, multi-core architecture need new ways of thinking about increased throughput to handle large amounts of data. This work discusses implementation of different divider algorithms and presents a recursive high radix divide unit that is modified to handle both multiplication and division targeted at multi-core architectures. Results are obtained with a 65nm technology and show a significant decrease in area and power while still maintaining a low total latency by utilizing high radix encoding within the functional unit.School of Electrical & Computer Engineerin