Compact and High Performance Dual-band Bandpass Filter Using Resonator-embedded Scheme for WLANs

A compact microstrip dual-band bandpass filter (DBBPF) with high selectivity and good suppression for wireless local area networks (WLANs) is proposed utilizing a novel embedded scheme resonator. Two passbands are produced by a pair of embedded half-wavelength meandered stepped-impedance resonator (MSIR) and a quadwavelength short stub loaded stepped-impedance resonator (SIR) separately. The resonator is fed by folded Tshaped capacitive source-load coupling microstrip feed line, and four transmission zeros are obtained at both sides of the bands to improve selectivity and suppression. Simultaneously, the size of the filter is extermely compact because embedding half-wavelength MSIR only changes the interior configuration of quad-wavelength SIR. To validate the design method, the designed filter is fabricated and measured. Both simulated and measured results indicate that good transmission property has been achieved

A Compact 1:4 Lossless T-Junction Power Divider Using Open Complementary Split Ring Resonator

This paper presents the size miniaturized and harmonic suppressed lossless 1:4 T-junction unequal power divider using an open complementary split ring resonator (OCSRR). By embedding the OCSRR structure in the microstrip transmission line, slow wave effect is introduced and thereby size reduction is achieved. The dimensions of OCSRR are optimized to reduce the length of high impedance and low impedance quarter-wavelength transmission lines. In our design high impedance line length is reduced to 58.6%, and low impedance line length is reduced to 12% when compared to the conventional quarter wavelength lines. The proposed power divider is having small dimensions of 0.18 λg × 0.33 λg and is 51.94% smaller than the conventional unequal power divider

Recent Techniques in Design and Implementation of Microwave Planar Filters

This paper details the techniques and initiatives made recently for improved response and simultaneous development of microwave planar filters. Although the objective of all the techniques is to design low cost filters with reduced dimensions, compact size with better frequency response, the methodological approaches are quite variant. The paper has gone through extensive analysis of all these techniques, their concept and design procedures

Design and Analysis of a Wide Stopband Microstrip Dual-band Bandpass Filter

A novel configuration of a dual-band bandpass filter (BPF) working as a harmonic attenuator is introduced and fabricated. The proposed filter operates at 3 GHz, for UHF and SHF applications, and 6.3 GHz, for wireless applications. The presented layout has a symmetric structure, which consists of coupled resonators. The designing of the proposed resonator is performed by introducing a new LC equivalent model of coupled lines. To verify the LC model of the coupled lines, the lumped elements are calculated. The introduced filter has a wide stopband up to 85 GHz with 28th harmonic suppression, for the first channel, and 13th harmonic suppression, for the second channel. The harmonics are attenuated using a novel structure. Also, the proposed BPF has a compact size of 0.056 λg2. Having several transmission zeros (TZs) that improve the performance of the presented BPF is another feature. The proposed dual-band BPF is fabricated and measured to verify the design method, where the measurement results confirm the simulations

A Review on the Structure, Application and Performance of the Passive Microstrip Devices

Microstrip technology is widely applied for design and implementation of several communication devices such as filters, diplexers, triplexers, multiplexers, couplers, etc. They are utilized to isolate desired signals and remove disturbing signals. The layout of filters, diplexers and triplexers have two, three and four ports, respectively. Passive filters have at least one pass channel, whereas diplexers have at least two channels to transmit the desired signal, and multiplexers have more passbands with more channels. In order to implement the passive components, first a cell called resonator must be designed. Creativity is very important in resonator design. It must be small and novel to get a better device than previous works. Therefore, the layout of previous reported resonator, used in passive microstrip devices, are studied in this work. There is a fierce competition among designers to miniaturize and increase the device performance. Hence we will investigate them, from the point of view size and performance, in this work. Some diplexers are multi-channel, which are more difficult to design than two-channel diplexers. Therefore, the multi-channel diplexers are less reported than the two-channel diplexers. The design of multiplexers is also very difficult because several channels must be controlled. Hence, they are less designed than filters and diplexers. The diplexers can be bandpass-bandpass or lowpass-bandpass, where the latest is less designed. This is because designing a lowpass-bandpass diplexer needs lowpass and bandpass resonators, whereas the design of a bandpass-bandpass diplexer needs only a bandpass resonator

Design of compact microstrip bandpass filter using square DMS slots for Wi-Fi and bluetooth applications

This paper presents the design of a compact bandpass filter based on two identical rectangular resonators and is implemented on microstrip technology for Wi-Fi and bluetoothapplications. To reduce the size of the filter, the defected microstrip structure (DMS) technique is proposed. This technique consists of etching slots in the rectangular resonator, which results in a change in the line properties and increase of the effective inductance and capacitance. This feature is used for miniaturization. The designed filter has a compact size (6.82x8.3) mm² with a low insertion loss of -0.1 dB and a good return loss of -36 dB. The simulation results are realized using the (computer simulation technology) CST Microwave software

Design of a Microstrip Bandpass Filter for 3.1-10.6 GHz Uwb Systems

In this thesis, ultra-wideband (UWB) microwave filters and design challenges are studied and, a microstrip UWB filter prototype design is presented. The UWB bandpass filter operating in the 3.6 GHz to 10.6 GHz frequency band is targeted to comply with the FCC spectral mask for UWB systems. The prototype filter is composed of quarter-wavelength spaced shunt stub transmission lines. The circuit is first simulated and optimized by using AWR DE simulation software tool. Then Sonnet EM Simulation and CST EM Simulation Tools are further utilized to obtain more accurate simulated results. The fabricated microstrip UWB bandpass filter is then measured using a vector network analyzer and results are presented. The prototype built can be used in UWB communications or localization systems

Enhanced Bandwidth of Band Pass Filter Using a Defected Microstrip Structure for Wideband Applications

In this paper, the bandwidth enhancement of bandpass filter (BPF) is proposed by utilizing defected microstrip structure (DMS). The initial micro strip BPF which is designed to have the bandwidth 1GHz with the center frequency of 3.5GHz is deployed on FR4 Epoxy dielectric substrate with overall size and thickness of 14mm x 24mm and 1.6mm, respectively. The proposed filter consists of two parallel coupled lines centred by ring-shaped, to enhance the bandwidth response, an attempt is carried out by applying DMS on the ligne center with a ring-shaped of initial filter. Here, the proposed DMS is constructed of the arrowhead dumbbell. Some parametrical studies to the DMS such as changing to obtain the optimum geometry of DMS with the desired bandwidth response. From the characterization result, it shows that the utilization of DMS on to the microstrip ligne of filter has widened 3dB bandwidth response up to 1.8GHz ranges from 2.55GHz to 4.35GHz yielding an enhanced wideband response for various wideband wireless applications