Integrated placement and routing of relay nodes for fault-tolerant hierarchical sensor networks

In two-tiered sensor networks, using higher-powered relay nodes as cluster heads has been shown to lead to further improvements in network performance. Placement of such relay nodes focuses on achieving specified coverage and connectivity requirements with as few relay nodes as possible. Existing placement strategies typically are unaware of energy dissipation due to routing and are not capable of optimizing the routing scheme and placement concurrently. We, in this thesis, propose an integrated integer linear program (ILP) formulation that determines the minimum number of relay nodes, along with their locations and a suitable communication strategy such that the network has a guaranteed lifetime as well as ensuring the pre-specified level of coverage (ks) and connectivity (kr). We also present an intersection based approach for creating the initial set of potential relay node positions, which are used by our ILP, and evaluate its performance under different conditions. Experimental results on networks with hundreds of sensor nodes show that our approach leads to significant improvement over existing energy-unaware placement schemes

Resilient Wireless Sensor Networks Using Topology Control: A Review

Wireless sensor networks (WSNs) may be deployed in failure-prone environments, and WSNs nodes easily fail due to unreliable wireless connections, malicious attacks and resource-constrained features. Nevertheless, if WSNs can tolerate at most losing k − 1 nodes while the rest of nodes remain connected, the network is called k − connected. k is one of the most important indicators for WSNs’ self-healing capability. Following a WSN design flow, this paper surveys resilience issues from the topology control and multi-path routing point of view. This paper provides a discussion on transmission and failure models, which have an important impact on research results. Afterwards, this paper reviews theoretical results and representative topology control approaches to guarantee WSNs to be k − connected at three different network deployment stages: pre-deployment, post-deployment and re-deployment. Multi-path routing protocols are discussed, and many NP-complete or NP-hard problems regarding topology control are identified. The challenging open issues are discussed at the end. This paper can serve as a guideline to design resilient WSNs

An Energy-Efficient Distributed Algorithm for k-Coverage Problem in Wireless Sensor Networks

Wireless sensor networks (WSNs) have recently achieved a great deal of attention due to its numerous attractive applications in many different fields. Sensors and WSNs possesses a number of special characteristics that make them very promising in many applications, but also put on them lots of constraints that make issues in sensor network particularly difficult. These issues may include topology control, routing, coverage, security, and data management. In this thesis, we focus our attention on the coverage problem. Firstly, we define the Sensor Energy-efficient Scheduling for k-coverage (SESK) problem. We then solve it by proposing a novel, completely localized and distributed scheduling approach, naming Distributed Energy-efficient Scheduling for k-coverage (DESK) such that the energy consumption among all the sensors is balanced, and the network lifetime is maximized while still satisfying the k-coverage requirement. Finally, in related work section we conduct an extensive survey of the existing work in literature that focuses on with the coverage problem

Deployment, Coverage And Network Optimization In Wireless Video Sensor Networks For 3D Indoor Monitoring

As a result of extensive research over the past decade or so, wireless sensor networks (wsns) have evolved into a well established technology for industry, environmental and medical applications. However, traditional wsns employ such sensors as thermal or photo light resistors that are often modeled with simple omni-directional sensing ranges, which focus only on scalar data within the sensing environment. In contrast, the sensing range of a wireless video sensor is directional and capable of providing more detailed video information about the sensing field. Additionally, with the introduction of modern features in non-fixed focus cameras such as the pan, tilt and zoom (ptz), the sensing range of a video sensor can be further regarded as a fan-shape in 2d and pyramid-shape in 3d. Such uniqueness attributed to wireless video sensors and the challenges associated with deployment restrictions of indoor monitoring make the traditional sensor coverage, deployment and networked solutions in 2d sensing model environments for wsns ineffective and inapplicable in solving the wireless video sensor network (wvsn) issues for 3d indoor space, thus calling for novel solutions. In this dissertation, we propose optimization techniques and develop solutions that will address the coverage, deployment and network issues associated within wireless video sensor networks for a 3d indoor environment. We first model the general problem in a continuous 3d space to minimize the total number of required video sensors to monitor a given 3d indoor region. We then convert it into a discrete version problem by incorporating 3d grids, which can achieve arbitrary approximation precision by adjusting the grid granularity. Due in part to the uniqueness of the visual sensor directional sensing range, we propose to exploit the directional feature to determine the optimal angular-coverage of each deployed visual sensor. Thus, we propose to deploy the visual sensors from divergent directional angles and further extend k-coverage to ``k-angular-coverage\u27\u27, while ensuring connectivity within the network. We then propose a series of mechanisms to handle obstacles in the 3d environment. We develop efficient greedy heuristic solutions that integrate all these aforementioned considerations one by one and can yield high quality results. Based on this, we also propose enhanced depth first search (dfs) algorithms that can not only further improve the solution quality, but also return optimal results if given enough time. Our extensive simulations demonstrate the superiority of both our greedy heuristic and enhanced dfs solutions. Finally, this dissertation discusses some future research directions such as in-network traffic routing and scheduling issues

Deployment Policies to Reliably Maintain and Maximize Expected Coverage in a Wireless Sensor Network

The long-term operation of a wireless sensor network (WSN) requires the deployment of new sensors over time to restore any loss in network coverage and communication ability resulting from sensor failures. Over the course of several deployment actions it is important to consider the cost of maintaining the WSN in addition to any desired performance measures such as coverage, connectivity, or reliability. The resulting problem formulation is approached first through a time-based deployment model in which the network is restored to a fixed size at periodic time intervals. The network destruction spectrum (D-spectrum) has been introduced to estimate reliability and is more commonly applied to a static network, rather than a dynamic network where new sensors are deployed over time. We discuss how the D-spectrum can be incorporated to estimate reliability of a time-based deployment policy and the features that allow a wide range of deployment policies to be evaluated in an efficient manner. We next focus on a myopic condition-based deployment model where the network is observed at periodic time intervals and a fixed budget is available to deploy new sensors with each observation. With a limited budget available the model must address the complexity present in a dynamic network size in addition to a dynamic network topology, and the dependence of network reliability on the deployment action. We discuss how the D-spectrum can be applied to the myopic condition-based deployment problem, illustrating the value of the D-spectrum in a variety of maintenance settings beyond the traditional static network reliability problem. From the insight of the time-based and myopic condition-based deployment models, we present a Markov decision process (MDP) model for the condition-based deployment problem that captures the benefit of an action beyond the current time period. Methodology related to approximate dynamic programming (ADP) and approximate value iteration algorithms is presented to search for high quality deployment policies. In addition to the time-based and myopic condition-based deployment models, the MDP model is one of the few addressing the repeated deployment of new sensors as well as an emphasis on network reliability. For each model we discuss the relevant problem formulation, methodology to estimate network reliability, and demonstrate the performance in a range of test instances, comparing to alternative policies or models as appropriate. We conclude with a stochastic optimization model focused on a slightly different objective to maximize expected coverage with uncertainty in where a sensor lands in the network. We discuss a heuristic solution method that seeks to determine an optimal deployment of sensors, present results for a wide range of network sizes and explore the impact of sensor failures on both the model formulation and resulting deployment policy

Energy-Efficient \u3cem\u3ek\u3c/em\u3e-Coverage for Wireless Sensor Networks with Variable Sensing Radii

Wireless Sensor Networks (WSNs) consist of spatially-distributed autonomous sensors that can cooperatively monitor physical and environmental conditions. Because of sensors’ resource-constraints in terms of size, power, and bandwidth, one of the fundamental objectives in WSNs is improving energy-efficiency. In this paper, utilizing sensors with variable sensing radii, we propose a group-based technique to obtain energy-efficient k-coverage based on our previous work with the Delaunay-Triangulation-based 1-coverage algorithm. Our sensing-radii optimization technique ensures full coverage and attains nearly-optimal energy consumption in sensing. Furthermore, our ns-2 simulations confirm that the group-based k-coverage reduces sensing energy consumption and maintains a sound coverage ratio for reliable surveillance

Optimal fault-tolerant placement of relay nodes in a mission critical wireless network

The operations of many critical infrastructures (e.g., airports) heavily depend on proper functioning of the radio communication network supporting operations. As a result, such a communication network is indeed a mission-critical communication network that needs adequate protection from external electromagnetic interferences. This is usually done through radiogoniometers. Basically, by using at least three suitably deployed radiogoniometers and a gateway gathering information from them, sources of electromagnetic emissions that are not supposed to be present in the monitored area can be localised. Typically, relay nodes are used to connect radiogoniometers to the gateway. As a result, some degree of fault-tolerance for the network of relay nodes is essential in order to offer a reliable monitoring. On the other hand, deployment of relay nodes is typically quite expensive. As a result, we have two conflicting requirements: minimise costs while guaranteeing a given fault-tolerance. In this paper address the problem of computing a deployment for relay nodes that minimises the relay node network cost while at the same time guaranteeing proper working of the network even when some of the relay nodes (up to a given maximum number) become faulty (fault-tolerance). We show that the above problem can be formulated as a Mixed Integer Linear Programming (MILP) as well as a Pseudo-Boolean Satisfiability (PB-SAT) optimisation problem and present experimental results com- paring the two approaches on realistic scenarios