06141 Abstracts Collection -- Dynamically Reconfigurable Architectures

From 02.04.06 to 07.04.06, the Dagstuhl Seminar 06141 ``Dynamically Reconfigurable Architectures\u27\u27 was held in the International Conference and Research Center (IBFI), Schloss Dagstuhl. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available

On the Exploration of FPGAs and High-Level Synthesis Capabilities on Multi-Gigabit-per-Second Networks

Tesis doctoral inédita leída en la Universidad Autónoma de Madrid, Escuela Politécnica Superior, Departamento de Tecnología Electrónica y de las Comunicaciones. Fecha de lectura: 24-01-2020Traffic on computer networks has faced an exponential grown in recent years. Both links and communication equipment had to adapt in order to provide a minimum quality of service required for current needs. However, in recent years, a few factors have prevented commercial off-the-shelf hardware from being able to keep pace with this growth rate, consequently, some software tools are struggling to fulfill their tasks, especially at speeds higher than 10 Gbit/s. For this reason, Field Programmable Gate Arrays (FPGAs) have arisen as an alternative to address the most demanding tasks without the need to design an application specific integrated circuit, this is in part to their flexibility and programmability in the field. Needless to say, developing for FPGAs is well-known to be complex. Therefore, in this thesis we tackle the use of FPGAs and High-Level Synthesis (HLS) languages in the context of computer networks. We focus on the use of FPGA both in computer network monitoring application and reliable data transmission at very high-speed. On the other hand, we intend to shed light on the use of high level synthesis languages and boost FPGA applicability in the context of computer networks so as to reduce development time and design complexity. In the first part of the thesis, devoted to computer network monitoring. We take advantage of the FPGA determinism in order to implement active monitoring probes, which consist on sending a train of packets which is later used to obtain network parameters. In this case, the determinism is key to reduce the uncertainty of the measurements. The results of our experiments show that the FPGA implementations are much more accurate and more precise than the software counterpart. At the same time, the FPGA implementation is scalable in terms of network speed — 1, 10 and 100 Gbit/s. In the context of passive monitoring, we leverage the FPGA architecture to implement algorithms able to thin cyphered traffic as well as removing duplicate packets. These two algorithms straightforward in principle, but very useful to help traditional network analysis tools to cope with their task at higher network speeds. On one hand, processing cyphered traffic bring little benefits, on the other hand, processing duplicate traffic impacts negatively in the performance of the software tools. In the second part of the thesis, devoted to the TCP/IP stack. We explore the current limitations of reliable data transmission using standard software at very high-speed. Nowadays, the network is becoming an important bottleneck to fulfill current needs, in particular in data centers. What is more, in recent years the deployment of 100 Gbit/s network links has started. Consequently, there has been an increase scrutiny of how networking functionality is deployed, furthermore, a wide range of approaches are currently being explored to increase the efficiency of networks and tailor its functionality to the actual needs of the application at hand. FPGAs arise as the perfect alternative to deal with this problem. For this reason, in this thesis we develop Limago an FPGA-based open-source implementation of a TCP/IP stack operating at 100 Gbit/s for Xilinx’s FPGAs. Limago not only provides an unprecedented throughput, but also, provides a tiny latency when compared to the software implementations, at least fifteen times. Limago is a key contribution in some of the hottest topic at the moment, for instance, network-attached FPGA and in-network data processing

Analysis of 3D Cone-Beam CT Image Reconstruction Performance on a FPGA

Efficient and accurate tomographic image reconstruction has been an intensive topic of research due to the increasing everyday usage in areas such as radiology, biology, and materials science. Computed tomography (CT) scans are used to analyze internal structures through capture of x-ray images. Cone-beam CT scans project a cone-shaped x-ray to capture 2D image data from a single focal point, rotating around the object. CT scans are prone to multiple artifacts, including motion blur, streaks, and pixel irregularities, therefore must be run through image reconstruction software to reduce visual artifacts. The most common algorithm used is the Feldkamp, Davis, and Kress (FDK) backprojection algorithm. The algorithm is computationally intensive due to the O(n4) backprojection step, running slowly with large CT data files on CPUs, but exceptionally well on GPUs due to the parallel nature of the algorithm. This thesis will analyze the performance of 3D cone-beam CT image reconstruction implemented in OpenCL on a FPGA embedded into a Power System

On DESTINY Science Instrument Electrical and Electronics Subsystem Framework

Future space missions are going to require large focal planes with many sensing arrays and hundreds of millions of pixels all read out at high data rates'' . This will place unique demands on the electrical and electronics (EE) subsystem design and it will be critically important to have high technology readiness level (TRL) EE concepts ready to support such missions. One such omission is the Joint Dark Energy Mission (JDEM) charged with making precise measurements of the expansion rate of the universe to reveal vital clues about the nature of dark energy - a hypothetical form of energy that permeates all of space and tends to increase the rate of the expansion. One of three JDEM concept studies - the Dark Energy Space Telescope (DESTINY) was conducted in 2008 at the NASA's Goddard Space Flight Center (GSFC) in Greenbelt, Maryland. This paper presents the EE subsystem framework, which evolved from the DESTINY science instrument study. It describes the main challenges and implementation concepts related to the design of an EE subsystem featuring multiple focal planes populated with dozens of large arrays and millions of pixels. The focal planes are passively cooled to cryogenic temperatures (below 140 K). The sensor mosaic is controlled by a large number of Readout Integrated Circuits and Application Specific Integrated Circuits - the ROICs/ASICs in near proximity to their sensor focal planes. The ASICs, in turn, are serviced by a set of "warm" EE subsystem boxes performing Field Programmable Gate Array (FPGA) based digital signal processing (DSP) computations of complex algorithms, such as sampling-up-the-ramp algorithm (SUTR), over large volumes of fast data streams. The SUTR boxes are supported by the Instrument Control/Command and Data Handling box (ICDH Primary and Backup boxes) for lossless data compression, command and low volume telemetry handling, power conversion and for communications with the spacecraft. The paper outlines how the JDEM DESTINY concept instrument EE subsystem can be built now, a design; which is generally U.S. Government work not protected by U.S. copyright IEEEAC paper # 1429. Version 4. Updated October 19, 2009 applicable to a wide variety of missions using large focal planes with lar ge mosaics of sensors

Closing the Gap: Leveraging AES-NI to Balance Adversarial Advantage and Honest User Performance in Argon2i

The challenge of providing data privacy and integrity while maintaining efficient performance for honest users is a persistent concern in cryptography. Attackers exploit advances in parallel hardware and custom circuit hardware to gain an advantage over regular users. One such method is the use of Application-Specific Integrated Circuits (ASICs) to optimize key derivation function (KDF) algorithms, giving adversaries a significant advantage in password guessing and recovery attacks. Other examples include using graphical processing units (GPUs) and field programmable gate arrays (FPGAs). We propose a focused approach to close the gap between adversarial advantage and honest user performance by leveraging the hardware optimization AES-NI (Advanced Encryption Standard New Instructions). AES-NI is widely available in modern x86 architecture microprocessors. Honest users can negate the adversary advantage by diminishing the utility of their computational power. We explore the impact of AES-NI on the Argon2i KDF algorithm, a widely-used and recommended password hashing function. Through our analysis, we demonstrate the effectiveness of incorporating AES-NI in reducing the advantage gained by attackers using ASICs. We also discuss the security and performance trade-offs to provide guidelines for practical implementation in deployed cryptosystems

Limits on Fundamental Limits to Computation

An indispensable part of our lives, computing has also become essential to industries and governments. Steady improvements in computer hardware have been supported by periodic doubling of transistor densities in integrated circuits over the last fifty years. Such Moore scaling now requires increasingly heroic efforts, stimulating research in alternative hardware and stirring controversy. To help evaluate emerging technologies and enrich our understanding of integrated-circuit scaling, we review fundamental limits to computation: in manufacturing, energy, physical space, design and verification effort, and algorithms. To outline what is achievable in principle and in practice, we recall how some limits were circumvented, compare loose and tight limits. We also point out that engineering difficulties encountered by emerging technologies may indicate yet-unknown limits.Comment: 15 pages, 4 figures, 1 tabl

Data Provenance and Management in Radio Astronomy: A Stream Computing Approach

New approaches for data provenance and data management (DPDM) are required for mega science projects like the Square Kilometer Array, characterized by extremely large data volume and intense data rates, therefore demanding innovative and highly efficient computational paradigms. In this context, we explore a stream-computing approach with the emphasis on the use of accelerators. In particular, we make use of a new generation of high performance stream-based parallelization middleware known as InfoSphere Streams. Its viability for managing and ensuring interoperability and integrity of signal processing data pipelines is demonstrated in radio astronomy. IBM InfoSphere Streams embraces the stream-computing paradigm. It is a shift from conventional data mining techniques (involving analysis of existing data from databases) towards real-time analytic processing. We discuss using InfoSphere Streams for effective DPDM in radio astronomy and propose a way in which InfoSphere Streams can be utilized for large antennae arrays. We present a case-study: the InfoSphere Streams implementation of an autocorrelating spectrometer, and using this example we discuss the advantages of the stream-computing approach and the utilization of hardware accelerators