Advanced heterogeneous video transcoding

PhDVideo transcoding is an essential tool to promote inter-operability between different video communication systems. This thesis presents two novel video transcoders, both operating on bitstreams of the cur- rent H.264/AVC standard. The first transcoder converts H.264/AVC bitstreams to a Wavelet Scalable Video Codec (W-SVC), while the second targets the emerging High Efficiency Video Coding (HEVC). Scalable Video Coding (SVC) enables low complexity adaptation of compressed video, providing an efficient solution for content delivery through heterogeneous networks. The transcoder proposed here aims at exploiting the advantages offered by SVC technology when dealing with conventional coders and legacy video, efficiently reusing information found in the H.264/AVC bitstream to achieve a high rate-distortion performance at a low complexity cost. Its main features include new mode mapping algorithms that exploit the W-SVC larger macroblock sizes, and a new state-of-the-art motion vector composition algorithm that is able to tackle different coding configurations in the H.264/AVC bitstream, including IPP or IBBP with multiple reference frames. The emerging video coding standard, HEVC, is currently approaching the final stage of development prior to standardization. This thesis proposes and evaluates several transcoding algorithms for the HEVC codec. In particular, a transcoder based on a new method that is capable of complexity scalability, trading off rate-distortion performance for complexity reduction, is proposed. Furthermore, other transcoding solutions are explored, based on a novel content-based modeling approach, in which the transcoder adapts its parameters based on the contents of the sequence being encoded. Finally, the application of this research is not constrained to these transcoders, as many of the techniques developed aim to contribute to advance the research on this field, and have the potential to be incorporated in different video transcoding architectures

Efficient Support for Application-Specific Video Adaptation

As video applications become more diverse, video must be adapted in different ways to meet the requirements of different applications when there are insufficient resources. In this dissertation, we address two sorts of requirements that cannot be addressed by existing video adaptation technologies: (i) accommodating large variations in resolution and (ii) collecting video effectively in a multi-hop sensor network. In addition, we also address requirements for implementing video adaptation in a sensor network. Accommodating large variation in resolution is required by the existence of display devices with widely disparate screen sizes. Existing resolution adaptation technologies usually aim at adapting video between two resolutions. We examine the limitations of these technologies that prevent them from supporting a large number of resolutions efficiently. We propose several hybrid schemes and study their performance. Among these hybrid schemes, Bonneville, a framework that combines multiple encodings with limited scalability, can make good trade-offs when organizing compressed video to support a wide range of resolutions. Video collection in a sensor network requires adapting video in a multi-hop storeand- forward network and with multiple video sources. This task cannot be supported effectively by existing adaptation technologies, which are designed for real-time streaming applications from a single source over IP-style end-to-end connections. We propose to adapt video in the network instead of at the network edge. We also propose a framework, Steens, to compose adaptation mechanisms on multiple nodes. We design two signaling protocols in Steens to coordinate multiple nodes. Our simulations show that in-network adaptation can use buffer space on intermediate nodes for adaptation and achieve better video quality than conventional network-edge adaptation. Our simulations also show that explicit collaboration among multiple nodes through signaling can improve video quality, waste less bandwidth, and maintain bandwidth-sharing fairness. The implementation of video adaptation in a sensor network requires system support for programmability, retaskability, and high performance. We propose Cascades, a component-based framework, to provide the required support. A prototype implementation of Steens in this framework shows that the performance overhead is less than 5% compared to a hard-coded C implementation

3D multiple description coding for error resilience over wireless networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Mobile communications has gained a growing interest from both customers and service providers alike in the last 1-2 decades. Visual information is used in many application domains such as remote health care, video –on demand, broadcasting, video surveillance etc. In order to enhance the visual effects of digital video content, the depth perception needs to be provided with the actual visual content. 3D video has earned a significant interest from the research community in recent years, due to the tremendous impact it leaves on viewers and its enhancement of the user’s quality of experience (QoE). In the near future, 3D video is likely to be used in most video applications, as it offers a greater sense of immersion and perceptual experience. When 3D video is compressed and transmitted over error prone channels, the associated packet loss leads to visual quality degradation. When a picture is lost or corrupted so severely that the concealment result is not acceptable, the receiver typically pauses video playback and waits for the next INTRA picture to resume decoding. Error propagation caused by employing predictive coding may degrade the video quality severely. There are several ways used to mitigate the effects of such transmission errors. One widely used technique in International Video Coding Standards is error resilience. The motivation behind this research work is that, existing schemes for 2D colour video compression such as MPEG, JPEG and H.263 cannot be applied to 3D video content. 3D video signals contain depth as well as colour information and are bandwidth demanding, as they require the transmission of multiple high-bandwidth 3D video streams. On the other hand, the capacity of wireless channels is limited and wireless links are prone to various types of errors caused by noise, interference, fading, handoff, error burst and network congestion. Given the maximum bit rate budget to represent the 3D scene, optimal bit-rate allocation between texture and depth information rendering distortion/losses should be minimised. To mitigate the effect of these errors on the perceptual 3D video quality, error resilience video coding needs to be investigated further to offer better quality of experience (QoE) to end users. This research work aims at enhancing the error resilience capability of compressed 3D video, when transmitted over mobile channels, using Multiple Description Coding (MDC) in order to improve better user’s quality of experience (QoE). Furthermore, this thesis examines the sensitivity of the human visual system (HVS) when employed to view 3D video scenes. The approach used in this study is to use subjective testing in order to rate people’s perception of 3D video under error free and error prone conditions through the use of a carefully designed bespoke questionnaire.Petroleum Technology Development Fund (PTDF

State-of-the-Art and Trends in Scalable Video Compression with Wavelet Based Approaches

3noScalable Video Coding (SVC) differs form traditional single point approaches mainly because it allows to encode in a unique bit stream several working points corresponding to different quality, picture size and frame rate. This work describes the current state-of-the-art in SVC, focusing on wavelet based motion-compensated approaches (WSVC). It reviews individual components that have been designed to address the problem over the years and how such components are typically combined to achieve meaningful WSVC architectures. Coding schemes which mainly differ from the space-time order in which the wavelet transforms operate are here compared, discussing strengths and weaknesses of the resulting implementations. An evaluation of the achievable coding performances is provided considering the reference architectures studied and developed by ISO/MPEG in its exploration on WSVC. The paper also attempts to draw a list of major differences between wavelet based solutions and the SVC standard jointly targeted by ITU and ISO/MPEG. A major emphasis is devoted to a promising WSVC solution, named STP-tool, which presents architectural similarities with respect to the SVC standard. The paper ends drawing some evolution trends for WSVC systems and giving insights on video coding applications which could benefit by a wavelet based approach.partially_openpartially_openADAMI N; SIGNORONI. A; R. LEONARDIAdami, Nicola; Signoroni, Alberto; Leonardi, Riccard

Receiver-Driven Video Adaptation

In the span of a single generation, video technology has made an incredible impact on daily life. Modern use cases for video are wildly diverse, including teleconferencing, live streaming, virtual reality, home entertainment, social networking, surveillance, body cameras, cloud gaming, and autonomous driving. As these applications continue to grow more sophisticated and heterogeneous, a single representation of video data can no longer satisfy all receivers. Instead, the initial encoding must be adapted to each receiver's unique needs. Existing adaptation strategies are fundamentally flawed, however, because they discard the video's initial representation and force the content to be re-encoded from scratch. This process is computationally expensive, does not scale well with the number of videos produced, and throws away important information embedded in the initial encoding. Therefore, a compelling need exists for the development of new strategies that can adapt video content without fully re-encoding it. To better support the unique needs of smart receivers, diverse displays, and advanced applications, general-use video systems should produce and offer receivers a more flexible compressed representation that supports top-down adaptation strategies from an original, compressed-domain ground truth. This dissertation proposes an alternate model for video adaptation that addresses these challenges. The key idea is to treat the initial compressed representation of a video as the ground truth, and allow receivers to drive adaptation by dynamically selecting which subsets of the captured data to receive. In support of this model, three strategies for top-down, receiver-driven adaptation are proposed. First, a novel, content-agnostic entropy coding technique is implemented in which symbols are selectively dropped from an input abstract symbol stream based on their estimated probability distributions to hit a target bit rate. Receivers are able to guide the symbol dropping process by supplying the encoder with an appropriate rate controller algorithm that fits their application needs and available bandwidths. Next, a domain-specific adaptation strategy is implemented for H.265/HEVC coded video in which the prediction data from the original source is reused directly in the adapted stream, but the residual data is recomputed as directed by the receiver. By tracking the changes made to the residual, the encoder can compensate for decoder drift to achieve near-optimal rate-distortion performance. Finally, a fully receiver-driven strategy is proposed in which the syntax elements of a pre-coded video are cataloged and exposed directly to clients through an HTTP API. Instead of requesting the entire stream at once, clients identify the exact syntax elements they wish to receive using a carefully designed query language. Although an implementation of this concept is not provided, an initial analysis shows that such a system could save bandwidth and computation when used by certain targeted applications.Doctor of Philosoph

A Survey on Energy Consumption and Environmental Impact of Video Streaming

Climate change challenges require a notable decrease in worldwide greenhouse gas (GHG) emissions across technology sectors. Digital technologies, especially video streaming, accounting for most Internet traffic, make no exception. Video streaming demand increases with remote working, multimedia communication services (e.g., WhatsApp, Skype), video streaming content (e.g., YouTube, Netflix), video resolution (4K/8K, 50 fps/60 fps), and multi-view video, making energy consumption and environmental footprint critical. This survey contributes to a better understanding of sustainable and efficient video streaming technologies by providing insights into the state-of-the-art and potential future directions for researchers, developers, and engineers, service providers, hosting platforms, and consumers. We widen this survey's focus on content provisioning and content consumption based on the observation that continuously active network equipment underneath video streaming consumes substantial energy independent of the transmitted data type. We propose a taxonomy of factors that affect the energy consumption in video streaming, such as encoding schemes, resource requirements, storage, content retrieval, decoding, and display. We identify notable weaknesses in video streaming that require further research for improved energy efficiency: (1) fixed bitrate ladders in HTTP live streaming; (2) inefficient hardware utilization of existing video players; (3) lack of comprehensive open energy measurement dataset covering various device types and coding parameters for reproducible research

Surveillance centric coding

PhDThe research work presented in this thesis focuses on the development of techniques specific to surveillance videos for efficient video compression with higher processing speed. The Scalable Video Coding (SVC) techniques are explored to achieve higher compression efficiency. The framework of SVC is modified to support Surveillance Centric Coding (SCC). Motion estimation techniques specific to surveillance videos are proposed in order to speed up the compression process of the SCC. The main contributions of the research work presented in this thesis are divided into two groups (i) Efficient Compression and (ii) Efficient Motion Estimation. The paradigm of Surveillance Centric Coding (SCC) is introduced, in which coding aims to achieve bit-rate optimisation and adaptation of surveillance videos for storing and transmission purposes. In the proposed approach the SCC encoder communicates with the Video Content Analysis (VCA) module that detects events of interest in video captured by the CCTV. Bit-rate optimisation and adaptation are achieved by exploiting the scalability properties of the employed codec. Time segments containing events relevant to surveillance application are encoded using high spatiotemporal resolution and quality while the irrelevant portions from the surveillance standpoint are encoded at low spatio-temporal resolution and / or quality. Thanks to the scalability of the resulting compressed bit-stream, additional bit-rate adaptation is possible; for instance for the transmission purposes. Experimental evaluation showed that significant reduction in bit-rate can be achieved by the proposed approach without loss of information relevant to surveillance applications. In addition to more optimal compression strategy, novel approaches to performing efficient motion estimation specific to surveillance videos are proposed and implemented with experimental results. A real-time background subtractor is used to detect the presence of any motion activity in the sequence. Different approaches for selective motion estimation, GOP based, Frame based and Block based, are implemented. In the former, motion estimation is performed for the whole group of pictures (GOP) only when a moving object is detected for any frame of the GOP. iii While for the Frame based approach; each frame is tested for the motion activity and consequently for selective motion estimation. The selective motion estimation approach is further explored at a lower level as Block based selective motion estimation. Experimental evaluation showed that significant reduction in computational complexity can be achieved by applying the proposed strategy. In addition to selective motion estimation, a tracker based motion estimation and fast full search using multiple reference frames has been proposed for the surveillance videos. Extensive testing on different surveillance videos shows benefits of application of proposed approaches to achieve the goals of the SCC

3D multiple description coding for error resilience over wireless networks

Mobile communications has gained a growing interest from both customers and service providers alike in the last 1-2 decades. Visual information is used in many application domains such as remote health care, video –on demand, broadcasting, video surveillance etc. In order to enhance the visual effects of digital video content, the depth perception needs to be provided with the actual visual content. 3D video has earned a significant interest from the research community in recent years, due to the tremendous impact it leaves on viewers and its enhancement of the user’s quality of experience (QoE). In the near future, 3D video is likely to be used in most video applications, as it offers a greater sense of immersion and perceptual experience. When 3D video is compressed and transmitted over error prone channels, the associated packet loss leads to visual quality degradation. When a picture is lost or corrupted so severely that the concealment result is not acceptable, the receiver typically pauses video playback and waits for the next INTRA picture to resume decoding. Error propagation caused by employing predictive coding may degrade the video quality severely. There are several ways used to mitigate the effects of such transmission errors. One widely used technique in International Video Coding Standards is error resilience. The motivation behind this research work is that, existing schemes for 2D colour video compression such as MPEG, JPEG and H.263 cannot be applied to 3D video content. 3D video signals contain depth as well as colour information and are bandwidth demanding, as they require the transmission of multiple high-bandwidth 3D video streams. On the other hand, the capacity of wireless channels is limited and wireless links are prone to various types of errors caused by noise, interference, fading, handoff, error burst and network congestion. Given the maximum bit rate budget to represent the 3D scene, optimal bit-rate allocation between texture and depth information rendering distortion/losses should be minimised. To mitigate the effect of these errors on the perceptual 3D video quality, error resilience video coding needs to be investigated further to offer better quality of experience (QoE) to end users. This research work aims at enhancing the error resilience capability of compressed 3D video, when transmitted over mobile channels, using Multiple Description Coding (MDC) in order to improve better user’s quality of experience (QoE). Furthermore, this thesis examines the sensitivity of the human visual system (HVS) when employed to view 3D video scenes. The approach used in this study is to use subjective testing in order to rate people’s perception of 3D video under error free and error prone conditions through the use of a carefully designed bespoke questionnaire.EThOS - Electronic Theses Online ServicePetroleum Technology Development Fund (PTDF)GBUnited Kingdo