Time-and event-driven communication process for networked control systems: A survey

Copyright © 2014 Lei Zou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.In recent years, theoretical and practical research topics on networked control systems (NCSs) have gained an increasing interest from many researchers in a variety of disciplines owing to the extensive applications of NCSs in practice. In particular, an urgent need has arisen to understand the effects of communication processes on system performances. Sampling and protocol are two fundamental aspects of a communication process which have attracted a great deal of research attention. Most research focus has been on the analysis and control of dynamical behaviors under certain sampling procedures and communication protocols. In this paper, we aim to survey some recent advances on the analysis and synthesis issues of NCSs with different sampling procedures (time-and event-driven sampling) and protocols (static and dynamic protocols). First, these sampling procedures and protocols are introduced in detail according to their engineering backgrounds as well as dynamic natures. Then, the developments of the stabilization, control, and filtering problems are systematically reviewed and discussed in great detail. Finally, we conclude the paper by outlining future research challenges for analysis and synthesis problems of NCSs with different communication processes.This work was supported in part by the National Natural Science Foundation of China under Grants 61329301, 61374127, and 61374010, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany

Recent advances on filtering and control for nonlinear stochastic complex systems with incomplete information: A survey

This Article is provided by the Brunel Open Access Publishing Fund - Copyright @ 2012 Hindawi PublishingSome recent advances on the filtering and control problems for nonlinear stochastic complex systems with incomplete information are surveyed. The incomplete information under consideration mainly includes missing measurements, randomly varying sensor delays, signal quantization, sensor saturations, and signal sampling. With such incomplete information, the developments on various filtering and control issues are reviewed in great detail. In particular, the addressed nonlinear stochastic complex systems are so comprehensive that they include conventional nonlinear stochastic systems, different kinds of complex networks, and a large class of sensor networks. The corresponding filtering and control technologies for such nonlinear stochastic complex systems are then discussed. Subsequently, some latest results on the filtering and control problems for the complex systems with incomplete information are given. Finally, conclusions are drawn and several possible future research directions are pointed out.This work was supported in part by the National Natural Science Foundation of China under Grant nos. 61134009, 61104125, 61028008, 61174136, 60974030, and 61074129, the Qing Lan Project of Jiangsu Province of China, the Project sponsored by SRF for ROCS of SEM of China, the Engineering and Physical Sciences Research Council EPSRC of the UK under Grant GR/S27658/01, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany

Non-fragile estimation for discrete-time T-S fuzzy systems with event-triggered protocol

summary:This paper investigates the non-fragile state estimation problem for a class of discrete-time T-S fuzzy systems with time-delays and multiple missing measurements under event-triggered mechanism. First of all, the plant is subject to the time-varying delays and the stochastic disturbances. Next, a random white sequence, the element of which obeys a general probabilistic distribution defined on $[0,1]$, is utilized to formulate the occurrence of the missing measurements. Also, an event generator function is employed to regulate the transmission of data to save the precious energy. Then, a non-fragile state estimator is constructed to reflect the randomly occurring gain variations in the implementing process. By means of the Lyapunov-Krasovskii functional, the desired sufficient conditions are obtained such that the Takagi-Sugeno (T-S) fuzzy estimation error system is exponentially ultimately bounded in the mean square. And then the upper bound is minimized via the robust optimization technique and the estimator gain matrices can be calculated. Finally, a simulation example is utilized to demonstrate the effectiveness of the state estimation scheme proposed in this paper

Stability Analysis of Delayed Genetic Regulatory Networks via a Relaxed Double Integral Inequality

Time delay arising in a genetic regulatory network may cause the instability. This paper is concerned with the stability analysis of genetic regulatory networks with interval time-varying delays. Firstly, a relaxed double integral inequality, named as Wirtinger-type double integral inequality (WTDII), is established to estimate the double integral term appearing in the derivative of Lyapunov-Krasovskii functional with a triple integral term. And it is proved theoretically that the proposed WTDII is tighter than the widely used Jensen-based double inequality and the recently developed Wiringter-based double inequality. Then, by applying the WTDII to the stability analysis of a delayed genetic regulatory network, together with the usage of useful information of regulatory functions, several delay-range- and delay-rate-dependent (or delay-rate-independent) criteria are derived in terms of linear matrix inequalities. Finally, an example is carried out to verify the effectiveness of the proposed method and also to show the advantages of the established stability criteria through the comparison with some literature

A Less Conservative Stability Criterion for Delayed Stochastic Genetic Regulatory Networks

This paper concerns the problem of stability analysis for delayed stochastic genetic regulatory networks. By introducing an appropriate Lyapunov-Krasovskii functional and employing delay-range partition approach, a new stability criterion is given to ensure the mean square stability of genetic regulatory networks with time-varying delays and stochastic disturbances. The stability criterion is given in the form of linear matrix inequalities, which can be easily tested by the LMI Toolbox of MATLAB. Moreover, it is theoretically shown that the obtained stability criterion is less conservative than the one in W. Zhang et al., 2012. Finally, a numerical example is presented to illustrate our theory

Robust Controller for Delays and Packet Dropout Avoidance in Solar-Power Wireless Network

Solar Wireless Networked Control Systems (SWNCS) are a style of distributed control systems where sensors, actuators, and controllers are interconnected via a wireless communication network. This system setup has the benefit of low cost, flexibility, low weight, no wiring and simplicity of system diagnoses and maintenance. However, it also unavoidably calls some wireless network time delays and packet dropout into the design procedure. Solar lighting system offers a clean environment, therefore able to continue for a long period. SWNCS also offers multi Service infrastructure solution for both developed and undeveloped countries. The system provides wireless controller lighting, wireless communications network (WI-FI/WIMAX), CCTV surveillance, and wireless sensor for weather measurement which are all powered by solar energy

Exponential state estimation for competitive neural network via stochastic sampled-data control with packet losses

This paper investigates the exponential state estimation problem for competitive neural networks via stochastic sampled-data control with packet losses. Based on this strategy, a switched system model is used to describe packet dropouts for the error system. In addition, transmittal delays between neurons are also considered. Instead of the continuous measurement, the sampled measurement is used to estimate the neuron states, and a sampled-data estimator with probabilistic sampling in two sampling periods is proposed. Then the estimator is designed in terms of the solution to a set of linear matrix inequalities (LMIs), which can be solved by using available software. When the missing of control packet occurs, some sufficient conditions are obtained to guarantee that the exponentially stable of the error system by means of constructing an appropriate Lyapunov function and using the average dwell-time technique. Finally, a numerical example is given to show the effectiveness of the proposed method

Data based identification and prediction of nonlinear and complex dynamical systems

We thank Dr. R. Yang (formerly at ASU), Dr. R.-Q. Su (formerly at ASU), and Mr. Zhesi Shen for their contributions to a number of original papers on which this Review is partly based. This work was supported by ARO under Grant No. W911NF-14-1-0504. W.-X. Wang was also supported by NSFC under Grants No. 61573064 and No. 61074116, as well as by the Fundamental Research Funds for the Central Universities, Beijing Nova Programme.Peer reviewedPostprin

PID controller design and tuning in networked control systems

Networked control systems (NCS) are distributed real-time computing and control systems with sensors, actuators and controllers that communicate over a shared medium. The distributed nature of NCS and issues related to the shared communication medium pose significant challenges for control design, as the control system no longer follows the rules of classical control theory. The main problems that are not well covered by the traditional control theory are varying time-delays due to communication and computation, and packet losses. During recent years, the control design of NCS and varying time-delay systems has been extensively researched. This investment has provided us with new results on stability. Often the proposed methods and solutions are far too complex for industrial use, especially if wireless automation applications are considered. The algorithms are computationally heavy, possibly requiring complete information from say, a network of hundreds or thousands of nodes. In the wireless case this is not feasible. The above justifies the use and research of simple controller structures and algorithms for NCS. Despite the growing interest towards more advanced control algorithms, the Proportional-Integral-Derivative (PID) controller still has a dominant status in the industry. Nevertheless, using PID for NCS has not been thoroughly investigated, especially with regard to controller tuning. This thesis proposes several PID tuning methods, which provide robustness against the challenges of NCS, namely varying time-delays (jitter) and packet loss. The doctoral thesis consists of a summary and eight publications that focus on the PID controller design, tuning and experimentation in NCS. The thesis includes a literature review of recent stability and control design results in NCS, a summary of publications and the original publications. The control design methods applied in the publications are also reviewed. In the thesis, several new methods for PID tuning in NCS are proposed. To make the methods usable, a PID tuning tool that implements one of the tuning methods is also developed. In order to verify the results of control design with real processes, the thesis suggests using the MoCoNet platform developed at the Helsinki University of Technology, Finland. The platform provides the tools for remote laboratory experiments in NCS settings. The results of the thesis indicate that the PID controller is well suited for NCS provided that the properties of the integrated communication and control system are taken into account in the tuning phase