A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

5G無線通信における誤り訂正符号化方式の評価に関する研究

早大学位記番号:新8267早稲田大

Advanced transmitter and receivers in future wireless networks

O objectivo desta dissertação é aprofundar o estudo de tecnologias que permitam atingir comunicações mais eficientes e fiáveis nas futuras redes sem fios. Uma das tecnologias estudadas nesta dissertação e que ainda não existem muitos estudos é o Complex Rotation Matrix (CRM). Esta tecnologia é bastante útil em sistemas que usem multi-portadoras como o Orthogonal Frequency Division Multiplexing (OFDM) pois permite dividir a informação pelas várias sub-portadoras. Caso este sistema use também a tecnologia MIMO ainda permitirá a divisão da informação por várias antenas. As constelações hierárquicas são outro dos temas abordados nesta dissertação e são um método eficiente de entregar o mesmo conteúdo a diferentes utilizadores. Esta técnica poderá ser bastante útil tanto em sistemas de uma portadora como multi-portadoras. O Single Carrier (SC) é outra das tecnologias abordadas nesta dissertação. Um dos standards em que poderia ser utilizado tanto o OFDM com o SC é no Digital Video Broadcasting – Satellite services to Handhelds (DVB-SH). Este esquema de comunicação tem com propósito a entrega de conteúdos multimédia aos terminais móveis via comunicação com estações base ou por satélite. O uso de o OFDM no downlink (DL) e do SC no uplink (UL) no mesmo standard/protocolo teria repercussões também ao nível dos terminais móveis pois permitiria uma melhor eficiência na duração das baterias. Os resultados obtidos nesta tese visam sobretudo o estudo do CRM, estimação de canal e constelações hierárquicas. Para a obtenção de resultados foram efectuadas simulações com o método de Monte Carlo e Turbo Códigos. Os simuladores foram desenvolvidos em Matlab.The main purpose of this dissertation is the study of technologies that allow achieving more reliable and efficient communications in wireless systems. One of the technologies studied in this dissertation and practically new is the Complex Rotation Matrix (CRM). This technology is useful in systems that use multi-carrier as the Orthogonal Frequency Division Multiplexing (OFDM). The hierarchical constellations are other theme approached in this dissertation and it purpose efficiently is to deliver the same content to different users. Another technology studied in this dissertation was the Single Carrier (SC) with Frequency Division Equalization. The SC is a well-know technology and is used in several telecommunications systems. The goal is the future wireless communications adopt the two technologies in the same system and use one of them depending of the situation. The Digital Video Broadcasting – Satellite services to Handhelds (DVB-SH) is one standard that can take advantage of the using of the OFDM and SC in the same system. The main goal of the DVB-SH is deliver multimedia content via satellite communications or communications with base stations to mobile terminals. The mobile terminals can achieve a more efficiency in their batteries whether in a standard/protocol that uses OFDM in DL and SC in UL. The results obtained with this thesis have the purpose to study the CRM, channel estimation and hierarchical constellation. The simulators were developed in Matlab platform and Turbo Codes are the codification used, channel estimation is also used and all the simulations were made with the Monte Carlo method

Design of a DVB-T2 simulation platform and network optimization with Simulated Annealing

The implementation of the Digital Terrestrial Television is becoming a reality in the Spanish territory. In this context, with the satellite and cable systems, this technology is one of the possible mediums for the television signal transmission. Its development is becoming crucial for the digital transition in those countries which mainly depend on the terrestrial networks for the reception of multimedia contents. However, due to the maturity of the current standard, and also to the higher requirements of the customer needing (HDTV, new contents, etc.), a revision of the current standard becomes necessary. The DVB organisation in collaboration with other entities and organisms has developed a new standard version capable to satisfy those requirements. The main objective of the project is the design and implementation of a physical layer simulation platform for the DVB-T2 standard. This simulator allows the theoretical evaluation of the new enhanced proposals, making easier a later field measurement stage and the future network deployment. The document describes the implementation of the simulation platform as well as its subsequent validation stage, including large graphical results that allow the evaluation and quantification of the improvements introduced over the current standard version (DVB-T). On the other hand, and as future investigation lines, a solution for the future DVB-T2 network deployment is performed, enhancing the coverage capacity of the current network by the use of iterative meta-heuristic techniques. Finally it has to be mentioned that this work has been performed within the context of a project called FURIA, which is a strategic research project funded by the Spanish Ministry of Industry, Tourism and Commerce

Design of a DVB-T2 simulation platform and network optimization with Simulated Annealing

The implementation of the Digital Terrestrial Television is becoming a reality in the Spanish territory. In this context, with the satellite and cable systems, this technology is one of the possible mediums for the television signal transmission. Its development is becoming crucial for the digital transition in those countries which mainly depend on the terrestrial networks for the reception of multimedia contents. However, due to the maturity of the current standard, and also to the higher requirements of the customer needing (HDTV, new contents, etc.), a revision of the current standard becomes necessary. The DVB organisation in collaboration with other entities and organisms has developed a new standard version capable to satisfy those requirements. The main objective of the project is the design and implementation of a physical layer simulation platform for the DVB-T2 standard. This simulator allows the theoretical evaluation of the new enhanced proposals, making easier a later field measurement stage and the future network deployment. The document describes the implementation of the simulation platform as well as its subsequent validation stage, including large graphical results that allow the evaluation and quantification of the improvements introduced over the current standard version (DVB-T). On the other hand, and as future investigation lines, a solution for the future DVB-T2 network deployment is performed, enhancing the coverage capacity of the current network by the use of iterative meta-heuristic techniques. Finally it has to be mentioned that this work has been performed within the context of a project called FURIA, which is a strategic research project funded by the Spanish Ministry of Industry, Tourism and Commerce

Low-Power Embedded Design Solutions and Low-Latency On-Chip Interconnect Architecture for System-On-Chip Design

This dissertation presents three design solutions to support several key system-on-chip (SoC) issues to achieve low-power and high performance. These are: 1) joint source and channel decoding (JSCD) schemes for low-power SoCs used in portable multimedia systems, 2) efficient on-chip interconnect architecture for massive multimedia data streaming on multiprocessor SoCs (MPSoCs), and 3) data processing architecture for low-power SoCs in distributed sensor network (DSS) systems and its implementation. The first part includes a low-power embedded low density parity check code (LDPC) - H.264 joint decoding architecture to lower the baseband energy consumption of a channel decoder using joint source decoding and dynamic voltage and frequency scaling (DVFS). A low-power multiple-input multiple-output (MIMO) and H.264 video joint detector/decoder design that minimizes energy for portable, wireless embedded systems is also designed. In the second part, a link-level quality of service (QoS) scheme using unequal error protection (UEP) for low-power network-on-chip (NoC) and low latency on-chip network designs for MPSoCs is proposed. This part contains WaveSync, a low-latency focused network-on-chip architecture for globally-asynchronous locally-synchronous (GALS) designs and a simultaneous dual-path routing (SDPR) scheme utilizing path diversity present in typical mesh topology network-on-chips. SDPR is akin to having a higher link width but without the significant hardware overhead associated with simple bus width scaling. The last part shows data processing unit designs for embedded SoCs. We propose a data processing and control logic design for a new radiation detection sensor system generating data at or above Peta-bits-per-second level. Implementation results show that the intended clock rate is achieved within the power target of less than 200mW. We also present a digital signal processing (DSP) accelerator supporting configurable MAC, FFT, FIR, and 3-D cross product operations for embedded SoCs. It consumes 12.35mW along with 0.167mm2 area at 333MHz

Towards reliable communication in LTE-A connected heterogeneous machine to machine network

Machine to machine (M2M) communication is an emerging technology that enables heterogeneous devices to communicate with each other without human intervention and thus forming so-called Internet of Things (IoTs). Wireless cellular networks (WCNs) play a significant role in the successful deployment of M2M communication. Specially the ongoing massive deployment of long term evolution advanced (LTE-A) makes it possible to establish machine type communication (MTC) in most urban and remote areas, and by using LTE-A backhaul network, a seamless network communication is being established between MTC-devices and-applications. However, the extensive network coverage does not ensure a successful implementation of M2M communication in the LTE-A, and therefore there are still some challenges. Energy efficient reliable transmission is perhaps the most compelling demand for various M2M applications. Among the factors affecting reliability of M2M communication are the high endto-end delay and high bit error rate. The objective of the thesis is to provide reliable M2M communication in LTE-A network. In this aim, to alleviate the signalling congestion on air interface and efficient data aggregation we consider a cluster based architecture where the MTC devices are grouped into number of clusters and traffics are forwarded through some special nodes called cluster heads (CHs) to the base station (BS) using single or multi-hop transmissions. In many deployment scenarios, some machines are allowed to move and change their location in the deployment area with very low mobility. In practice, the performance of data transmission often degrades with the increase of distance between neighboring CHs. CH needs to be reselected in such cases. However, frequent re-selection of CHs results in counter effect on routing and reconfiguration of resource allocation associated with CH-dependent protocols. In addition, the link quality between a CH-CH and CH-BS are very often affected by various dynamic environmental factors such as heat and humidity, obstacles and RF interferences. Since CH aggregates the traffic from all cluster members, failure of the CH means that the full cluster will fail. Many solutions have been proposed to combat with error prone wireless channel such as automatic repeat request (ARQ) and multipath routing. Though the above mentioned techniques improve the communication reliability but intervene the communication efficiency. In the former scheme, the transmitter retransmits the whole packet even though the part of the packet has been received correctly and in the later one, the receiver may receive the same information from multiple paths; thus both techniques are bandwidth and energy inefficient. In addition, with retransmission, overall end to end delay may exceed the maximum allowable delay budget. Based on the aforementioned observations, we identify CH-to-CH channel is one of the bottlenecks to provide reliable communication in cluster based multihop M2M network and present a full solution to support fountain coded cooperative communications. Our solution covers many aspects from relay selection to cooperative formation to meet the user’s QoS requirements. In the first part of the thesis, we first design a rateless-coded-incremental-relay selection (RCIRS) algorithm based on greedy techniques to guarantee the required data rate with a minimum cost. After that, we develop fountain coded cooperative communication protocols to facilitate the data transmission between two neighbor CHs. In the second part, we propose joint network and fountain coding schemes for reliable communication. Through coupling channel coding and network coding simultaneously in the physical layer, joint network and fountain coding schemes efficiently exploit the redundancy of both codes and effectively combat the detrimental effect of fading conditions in wireless channels. In the proposed scheme, after correctly decoding the information from different sources, a relay node applies network and fountain coding on the received signals and then transmits to the destination in a single transmission. Therefore, the proposed schemes exploit the diversity and coding gain to improve the system performance. In the third part, we focus on the reliable uplink transmission between CHs and BS where CHs transmit to BS directly or with the help of the LTE-A relay nodes (RN). We investigate both type-I and type-II enhanced LTE-A networks and propose a set of joint network and fountain coding schemes to enhance the link robustness. Finally, the proposed solutions are evaluated through extensive numerical simulations and the numerical results are presented to provide a comparison with the related works found in the literature