Energy Conservation in Passive Optical Networks: A Tutorial and Survey

The Passive Optical Network (PON) has been evolving continuously in terms of architecture and capacity to keep up with the demand for high-speed Internet access in the access network segment. Recently, integration of Software-Defined Networking (SDN), which provides programmable and (logically) centralized network control, with PON has attracted intensive research interest to further enhance PON performance and reduce operational and capital expenditure. Although PON is regarded as an energy-efficient a ccess n etwork s olution, it is a major contributor for increasing energy consumption in the access network segment because of its higher penetration rate than other access network technologies. Over the past several years, the major standardization bodies like IEEE and research communities have engaged in introducing energy-efficient PON solutions. This article familiarizes readers with PON evolution in terms of capacity, architecture, and its integration with virtualization and SDN based control. We present a comprehensive survey of the energy conservation research efforts in PON starting from conventional PON to SDN based PON leveraging virtual and physical network functions. This article also presents contemporary energy-efficient standardization activities in IEEE and ITU. To the best of our knowledge, to date, this article is the first most comprehensive survey on energy saving research and standardization on PON. We summarize the lessons learned from the recent advancements, identify important challenges ahead and outline several future research directions that can contribute to further advancement of energy-efficient PON

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Design and Analysis of Green Mission-Critical Fiber-Wireless Broadband Access Networks

In recent years, the ever-increasing environmental friendliness concern has made energy efficiency in telecom networks as an important theme in their operations. Meanwhile, mission-critical (MC) services and systems (such as healthcare, police, and firefighting) have been acquiring special attention from telecom designers and operators. The currently deployed MC network technologies are indigent in terms of bandwidth capacity, and thus they are not able to support the emerging MC multimedia applications. Therefore in this thesis, we first explore the possibility of provisioning the MC services over the integration of fiber-wireless (FiWi) technologies, which has been considered as a promising candidate for the deployment of high-speed and mobile broadband access networks. We then investigate the energy efficiency problem in the FiWi integration, which consists of WiMAX in the wireless plane, and of Ethernet Passive Optical Network (EPON) - the most popular variant of the next-generation PON (NG-PON) technology, in the optical plane. In WiMAX, the energy saving protocol has been extensively investigated and standardized. Conversely, it has been recently studied in NG-PON, which currently consumes the least power among all the high-speed access networks. However, NG-PON has notably matured in the past few years and is envisioned to massively evolve in the near future. This trend will increase the power requirements of NG-PON and make it no longer coveted. Therefore we address the energy efficiency problem in NG-PON. For each of our contributions, we conduct extensive simulations to demonstrate the effectiveness and advantages of the proposed solutions

Rodovias conectadas por meio de tecnologias PON e fibra ?ptica das operadoras de telecomunica??es

As cidades est?o mais conectadas, constitu?das de uma infraestrutura de telecomunica??es que integra diversos produtos e servi?os, como, por exemplo, Internet acess?vel por fibra ?ptica ou Wifi, voz sobre IP (VOIP) e videomonitoramento, nas modalidades de contrato oneroso ou gratuito. No entanto, n?o existe um equil?brio nos investimentos em todas as regi?es do Brasil, inclusive em termos de tecnologia, pois existem cidades com Internet sem qualidade e territ?rios sem acesso a esse servi?o. Por isso, este trabalho apresenta uma proposta inovadora para implantar os servi?os de telecomunica??es com baixo custo (n?o requer instala??o de fibra ?ptica) e alta qualidade (uso do mecanismo PON - Passive Optical Network) em todas as rodovias brasileiras, utilizando pesquisa de campo, por meio de entrevista com profissionais de telecomunica??es e fabricantes dos equipamentos, validado com testes e simula??es realizados em laborat?rio

Optimization of emerging extended FTTH WDM/TDM PONs and financial overall assessment

Optical access technology has experienced a boost in the last years, thanks to the continuously migrating multimedia services that are offered over the internet. Though the technologies used for deploying Fiber-To-The-x (FTTx) and Fiber-to-the-Home (FTTH) are mostly based on either Active solutions or as far as Passsive Optical Networks (PONs) is concerned, in Time Division Multiplexing (TDM), an evolution towards Hybrid solutions such as Wavelength Division Multiplexing/Time Division Multiplexing (WDM/TDM) can be foreseen. What needs to be researched and finally established are the exact designs for this important step of integration, which should be optimized in terms of transmission performance and cost, to address all requirements of next-generation passive optical networks. As the most critical elements in optical access network, the design and its cost are the main topics of this discussion. The covered topics span over a wide range and include cost estimation of several optical network technologies - architectures and their comparison and furthermore, subjects of design optimization. In this last category, in-line remote amplification, use of an alternative and an extended frequency band, dispersion compensation and equalization techniques have been examined as well as a combination of the aforementioned means of network optimization. Next to the principal proof of the proposed techniques, the benefits are highlighted in different case studies, while the most representative designs are further discussed