Fuzzy based obstacle avoidance system for autonomous mobile robot

The goal of this research was to develop a fuzzy obstacle avoidance system for an autonomous mobile robot using IR detection sensors. This paper presents implemented control architecture for behavior-based mobile robot. The mobile robot is able to interact with an unknown environment using a reactive strategy determined by sensory information. Current research in robotics aims to build autonomous and intelligent robots, which can plan its motion in a dynamic environment. Autonomous mobile robots are increasingly used in well structured environment such as warehouses, offices and industries. Fuzzy behavior able to make inferences is well suited for mobile robot navigation because of the uncertainty of the environment. A rule-based fuzzy controller with reactive behavior was implemented and tested on a two wheels mobile robot equipped with infrared sensors to perform collision-free navigation. The experimental results have shown that the proposed architecture provides an efficient and flexible solution for small wheeled mobile robots

Intelligent wheeled mobile robot navigation

The paper deals with the wireless sensor-based remote control of mobile robots motion in an unknown environment with obstacles using the Sun SPOT technology and gives the fuzzy velocity control of a mobile robot motion in an unknown environment with obstacles. When the vehicle is moving towards the target and the sensors detect an obstacle, an avoiding strategy and velocity control are necessary. We proposed the wireless sensor-based remote control of mobile robots motion in an unknown environment with obstacles using the Sun SPOT technology and a fuzzy reactive navigation strategy of collision-free motion and velocity control in an unknown environment with obstacles. The simulation results show the effectiveness and the validity of the obstacle avoidance behavior in an unknown environment. The proposed method have been implemented on the miniature mobile robot Khepera® that is equipped with sensors

A Systematic Literature Review of Path-Planning Strategies for Robot Navigation in Unknown Environment

The Many industries, including ports, space, surveillance, military, medicine and agriculture have benefited greatly from mobile robot technology.  An autonomous mobile robot navigates in situations that are both static and dynamic. As a result, robotics experts have proposed a range of strategies. Perception, localization, path planning, and motion control are all required for mobile robot navigation. However, Path planning is a critical component of a quick and secure navigation. Over the previous few decades, many path-planning algorithms have been developed. Despite the fact that the majority of mobile robot applications take place in static environments, there is a scarcity of algorithms capable of guiding robots in dynamic contexts. This review compares qualitatively mobile robot path-planning systems capable of navigating robots in static and dynamic situations. Artificial potential fields, fuzzy logic, genetic algorithms, neural networks, particle swarm optimization, artificial bee colonies, bacterial foraging optimization, and ant-colony are all discussed in the paper. Each method's application domain, navigation technique and validation context are discussed and commonly utilized cutting-edge methods are analyzed. This research will help researchers choose appropriate path-planning approaches for various applications including robotic cranes at the sea ports as well as discover gaps for optimization

Reusable Software Components for Robots Using Fuzzy Abstractions

Mobile robots today, while varying greatly in design, often have a large number of similarities in terms of their tasks and goals. Navigation, obstacle avoidance, and vision are all examples. In turn, robots of similar design, but with varying configurations, should be able to share the bulk of their controlling software. Any changes required should be minimal and ideally only to specify new hardware configurations. However, it is difficult to achieve such flexibility, mainly due to the enormous variety of robot hardware available and the huge number of possible configurations. Monolithic controllers that can handle such variety are impossible to build. This paper will investigate these portability problems, as well as techniques to manage common abstractions for user-designed components. The challenge is in creating new methods for robot software to support a diverse variety of robots, while also being easily upgraded and extended. These methods can then provide new ways to support the operational and functional reuse of the same high-level components across a variety of robots

Integrating an electronic compass for position tracking on a wheeled tricycle mobile robot

Dead-reckoning via encoders on wheeled-mobile robots is a simple but inaccurate method to estimate position. The major drawback of encoders is wheel slippage errors that accumulate over time. This problem is often addressed by using additional sensors such as compass, gyroscope, or GPS. This paper details the integration and effectiveness of a relatively low-cost solution using an electronic compass to reduce positioning error on a wheeled tricycle mobile robot. A customised Visual Studio program has been developed to adjust the settings of the electronic compass and integrate it with the Visual Studio based robot control system. The electronic compass heading data is fused with the encoder odometry heading data in three different ways: simple fusion, linear weighted fusion, and Kalman filter fusion. Simple fusion and linear weighted fusion rely on parameters determined from angular acceleration and angular velocity, respectively. The Kalman filter uses variance data for the encoders and electronic compass to determine an optimal heading. Experiments have been conducted in an indoor corridor environment to evaluate and compare the various fusion methods. Position error is successfully reduced and is sufficient to locate the robot within the corridor

Efficient PID Controller based Hexapod Wall Following Robot

This paper presents a design of wall followingbehaviour for hexapod robot based on PID controller. PIDcontroller is proposed here because of its ability to controlmany cases of non-linear systems. In this case, we proposed aPID controller to improve the speed and stability of hexapodrobot movement while following the wall. In this paper, PIDcontroller is used to control the robot legs, by adjusting thevalue of swing angle during forward or backward movement tomaintain the distance between the robot and the wall. Theexperimental result was verified by implementing the proposedcontrol method into actual prototype of hexapod robot

Development of Autonomous Anthropomorphic Wheeled Mobile Robotic Platform

This article presents the intelligent autonomous anthropomorphic wheeled mobile robotic platform motion control in unstructured environments. The fuzzy control of a wheeled autonomous anthropomorphic mobile robotic platform motion in unstructured environments with obstacles is proposed. Outputs of the fuzzy controller are the angular speed difference between the left and right wheels of the autonomous anthropomorphic robotic platform and the robot velocity. The simulation results show the effectiveness and the validity of the obstacle avoidance behaviour in the unstructured environment and velocity control of autonomous anthropomorphic mobile robotic platform motion of the proposed fuzzy control strategy. Wireless sensor-based remote control of autonomous anthropomorphic mobile robotic platform motion in unstructured environments is proposed