Hierarchical Optimization-Based Model Predictive Control for a Class of Discrete Fuzzy Large-Scale Systems Considering Time-Varying Delays and Disturbances

Altres ajuts: Acord transformatiu CRUE-CSICIn this manuscript, model predictive control for class of discrete fuzzy large-scale systems subjected to bounded time-varying delay and disturbances is studied. The considered method is Razumikhin for time-varying delay large-scale systems, in which it includes a Lyapunov function associated with the original non-augmented state space of system dynamics in comparison with the Krasovskii method. As a rule, the Razumikhin method has a perfect potential to avoid the inherent complexity of the Krasovskii method especially in the presence of large delays and disturbances. The considered large-scale system in this manuscript is decomposed into several subsystems, each of which is represented by a fuzzy Takagi-Sugeno (TS) model and the interconnection between any two subsystems is considered. Because the main section of the model predictive control is optimization, the hierarchical scheme is performed for the optimization problem. Furthermore, persistent disturbances are considered that robust positive invariance and input-to-state stability under such circumstances are studied. The linear matrix inequalities (LMIs) method is performed for our computations. So the closed-loop large-scale system is asymptotically stable. Ultimately, by two examples, the effectiveness of the proposed method is illustrated, and a comparison with other papers is made by remarks

How effective are smooth compositions in predictive control of TS fuzzy models?

In This Article, We Study The Structural Properties That Smooth Compositions Bring To Predictive Control Of Ts Fuzzy Models And Examine How They Affect The Uncertainties, Parameter Variations Of The System And Environmental Noises To Die Out. We Have Employed The Smoothness Structure Of Compositions To Convert The Mpc Cost Function Of Ts Fuzzy Model Of The Nonlinear Systems To An Incremental Iterative Algorithm. Hence, The Proposed Algorithm Does Not Linearize The Nonlinear Dynamics, Neither Requires Solving An Np Optimization Problem In Mpc And, Therefore, Is Very Fast And Simple. The Connectivist Identification&#8212 Mpc Approach&#8212 Can Be Employed For The Systems With The Long-Range Horizons. Therefore, The Technique Is Beneficial To The Dead-Time And Non-Minimum Phase Systems. The Stability Analysis Of The Algorithm Has Been Carried Out, And The Performance Of The Smooth Ts Fuzzy Identification&Amp -Controller Scheme To The Classical Ones Has Been Compared On A Non-Min Phase Test Problem With Different Uncertainties And Working Environments, Including (A) The Normal Working Conditions, (B) With The Additive Noises, (C) With The Parametric Changes, (D) With The Additive Time-Varying Disturbances To Demonstrate The Robust Behavior Of The Smooth Compositions

Parameter fault diagnosis in heat exchange networks with distributed time delay

This paper deals with parameter fault diagnosis in heat exchange networks (HENs) with joining and splitting connections where the change in the heat transfer coefficient is considered as fault. The fault diagnosis oriented model of the HEN elements was developed based on the equivalent LTI realization of distributed delay models. The Signed Directed Graph (SDG) method is used to derive the fault observability conditions. The presence of faults induces bi-linear fault-input terms into the system model. Thus, a nonlinear adaptive observer was proposed for fault diagnosis. To verify and validate the proposed method, a case study is presented. The simulation results show that the observers are successfully detecting and estimating the faults and unknown system states

Robust structural control of an underactuated floating wind turbine

This paper investigates the dynamic modeling and robust control of an underactuated floating wind turbine for vibration suppression. The offshore wind turbine is equipped with a tuned mass damper on the floating platform. The Lagrange's equation is employed to establish the limited degree‐of‐freedom dynamic model. A novel disturbance observer‐based hierarchical sliding mode control system is developed for mitigating loads of the underactuated floating wind turbine. In the proposed control scheme, two prescribed performance nonlinear disturbance observers are developed to estimate and counteract unknown disturbances, where the load induced by wave is considered as a mismatched disturbance while the load caused by wind is treated as a matched disturbance. The hierarchical sliding mode controller regulates the states of such an underactuated nonlinear system. In particular, the first‐order sliding mode differentiator is used to avoid the tedious analytic computation in the sliding mode control design. The stability of the whole closed‐loop system is rigorously analyzed, and some sufficient conditions are derived to guarantee the convergence of the states for the considered system. Numerical simulations deployed on both the design model and the National Renewable Energy Laboratory 5‐MW wind turbine model are provided, which demonstrate great effectiveness and strong robustness of the proposed control scheme

A Hierarchical Reliability Control Method for a Space Manipulator Based on the Strategy of Autonomous Decision-Making

In order to maintain and enhance the operational reliability of a robotic manipulator deployed in space, an operational reliability system control method is presented in this paper. First, a method to divide factors affecting the operational reliability is proposed, which divides the operational reliability factors into task-related factors and cost-related factors. Then the models describing the relationships between the two kinds of factors and control variables are established. Based on this, a multivariable and multiconstraint optimization model is constructed. Second, a hierarchical system control model which incorporates the operational reliability factors is constructed. The control process of the space manipulator is divided into three layers: task planning, path planning, and motion control. Operational reliability related performance parameters are measured and used as the system’s feedback. Taking the factors affecting the operational reliability into consideration, the system can autonomously decide which control layer of the system should be optimized and how to optimize it using a control level adjustment decision module. The operational reliability factors affect these three control levels in the form of control variable constraints. Simulation results demonstrate that the proposed method can achieve a greater probability of meeting the task accuracy requirements, while extending the expected lifetime of the space manipulator

Model-based fault diagnosis for aerospace systems: a survey

http://pig.sagepub.com/content/early/2012/01/06/0954410011421717International audienceThis survey of model-based fault diagnosis focuses on those methods that are applicable to aerospace systems. To highlight the characteristics of aerospace models, generic nonlinear dynamical modeling from flight mechanics is recalled and a unifying representation of sensor and actuator faults is presented. An extensive bibliographical review supports a description of the key points of fault detection methods that rely on analytical redundancy. The approaches that best suit the constraints of the field are emphasized and recommendations for future developments in in-flight fault diagnosis are provided

On-line anomaly detection with advanced independent component analysis of multi-variate residual signals from causal relation networks.

Anomaly detection in todays industrial environments is an ambitious challenge to detect possible faults/problems which may turn into severe waste during production, defects, or systems components damage, at an early stage. Data-driven anomaly detection in multi-sensor networks rely on models which are extracted from multi-sensor measurements and which characterize the anomaly-free reference situation. Therefore, significant deviations to these models indicate potential anomalies. In this paper, we propose a new approach which is based on causal relation networks (CRNs) that represent the inner causes and effects between sensor channels (or sensor nodes) in form of partial sub-relations, and evaluate its functionality and performance on two distinct production phases within a micro-fluidic chip manufacturing scenario. The partial relations are modeled by non-linear (fuzzy) regression models for characterizing the (local) degree of influences of the single causes on the effects. An advanced analysis of the multi-variate residual signals, obtained from the partial relations in the CRNs, is conducted. It employs independent component analysis (ICA) to characterize hidden structures in the fused residuals through independent components (latent variables) as obtained through the demixing matrix. A significant change in the energy content of latent variables, detected through automated control limits, indicates an anomaly. Suppression of possible noise content in residuals—to decrease the likelihood of false alarms—is achieved by performing the residual analysis solely on the dominant parts of the demixing matrix. Our approach could detect anomalies in the process which caused bad quality chips (with the occurrence of malfunctions) with negligible delay based on the process data recorded by multiple sensors in two production phases: injection molding and bonding, which are independently carried out with completely different process parameter settings and on different machines (hence, can be seen as two distinct use cases). Our approach furthermore i.) produced lower false alarm rates than several related and well-known state-of-the-art methods for (unsupervised) anomaly detection, and ii.) also caused much lower parametrization efforts (in fact, none at all). Both aspects are essential for the useability of an anomaly detection approach

A control-theoretical fault prognostics and accommodation framework for a class of nonlinear discrete-time systems

Fault diagnostics and prognostics schemes (FDP) are necessary for complex industrial systems to prevent unscheduled downtime resulting from component failures. Existing schemes in continuous-time are useful for diagnosing complex industrial systems and no work has been done for prognostics. Therefore, in this dissertation, a systematic design methodology for model-based fault prognostics and accommodation is undertaken for a class of nonlinear discrete-time systems. This design methodology, which does not require any failure data, is introduced in six papers. In Paper I, a fault detection and prediction (FDP) scheme is developed for a class of nonlinear system with state faults by assuming that all the states are measurable. A novel estimator is utilized for detecting a fault. Upon detection, an online approximator in discrete-time (OLAD) and a robust adaptive term are activated online in the estimator wherein the OLAD learns the unknown fault dynamics while the robust adaptive term ensures asymptotic performance guarantee. A novel update law is proposed for tuning the OLAD parameters. Additionally, by using the parameter update law, time to reach an a priori selected failure threshold is derived for prognostics. Subsequently, the FDP scheme is used to estimate the states and detect faults in nonlinear input-output systems in Paper II and to nonlinear discrete-time systems with both state and sensor faults in Paper III. Upon detection, a novel fault isolation estimator is used to identify the faults in Paper IV. It was shown that certain faults can be accommodated via controller reconfiguration in Paper V. Finally, the performance of the FDP framework is demonstrated via Lyapunov stability analysis and experimentally on the Caterpillar hydraulics test-bed in Paper VI by using an artificial immune system as an OLAD --Abstract, page iv

State estimators in soft sensing and sensor fusion for sustainable manufacturing

State estimators, including observers and Bayesian filters, are a class of model-based algorithms for estimating variables in a dynamical system given sensor measurements of related system states. They can be used to derive fast and accurate estimates of system variables which cannot be measured directly (’soft sensing’) or for which only noisy, intermittent, delayed, indirect or unreliable measurements are available, perhaps from multiple sources (’sensor fusion’). In this paper we introduce the concepts and main methods of state estimation and review recent applications in improving the sustainability of manufacturing processes. It is shown that state estimation algorithms can play a key role in manufacturing systems to accurately monitor and control processes to improve efficiencies, lower environmental impact, enhance product quality, improve the feasibility of processing more sustainable raw materials, and ensure safer working environments for humans. We discuss current and emerging trends in using state estimation as a framework for combining physical knowledge with other sources of data for monitoring and control of distributed manufacturing systems

Time-Delay Systems

Time delay is very often encountered in various technical systems, such as electric, pneumatic and hydraulic networks, chemical processes, long transmission lines, robotics, etc. The existence of pure time lag, regardless if it is present in the control or/and the state, may cause undesirable system transient response, or even instability. Consequently, the problem of controllability, observability, robustness, optimization, adaptive control, pole placement and particularly stability and robustness stabilization for this class of systems, has been one of the main interests for many scientists and researchers during the last five decades