SystemC Model of Power Side-Channel Attacks Against AI Accelerators: Superstition or not?

As training artificial intelligence (AI) models is a lengthy and hence costly process, leakage of such a model's internal parameters is highly undesirable. In the case of AI accelerators, side-channel information leakage opens up the threat scenario of extracting the internal secrets of pre-trained models. Therefore, sufficiently elaborate methods for design verification as well as fault and security evaluation at the electronic system level are in demand. In this paper, we propose estimating information leakage from the early design steps of AI accelerators to aid in a more robust architectural design. We first introduce the threat scenario before diving into SystemC as a standard method for early design evaluation and how this can be applied to threat modeling. We present two successful side-channel attack methods executed via SystemC-based power modeling: correlation power analysis and template attack, both leading to total information leakage. The presented models are verified against an industry-standard netlist-level power estimation to prove general feasibility and determine accuracy. Consequently, we explore the impact of additive noise in our simulation to establish indicators for early threat evaluation. The presented approach is again validated via a model-vs-netlist comparison, showing high accuracy of the achieved results. This work hence is a solid step towards fast attack deployment and, subsequently, the design of attack-resilient AI accelerators

The COMPLEX reference framework for HW/SW co-design and power management supporting platform-based design-space exploration

n/

Virtual Cycle-accurate Hardware and Software Co-simulation Platform for Cellular IoT

Modern embedded development flows often depend on FPGA board usage for pre-ASIC system verification. The purpose of this project is to instead explore the usage of Electronic System Level (ESL) hardware-software co-simulation through the usage of ARM SoC Designer tool to create a virtual prototype of a cellular IoT modem and thereafter compare the benefits of including such a methodology into the early development cycle. The virtual system is completely developed and executed on a host computer, without the requirement of additional hardware. The virtual prototype hardware is based on C++ ARM verified cycle-accurate models generated from RTL hardware descriptions, High-level synthesis (HLS) pre-synthesis SystemC HW accelerator models and behavioural models which implement the ARM Cycle-accurate Simulation Interface (CASI). The micro-controller of the virtual system which is based on an ARM Cortex-M processor, is capable of executing instructions from a memory module. This report documents the virtual prototype implementation and compares both the software performance and cycle-accuracy of various virtual micro-controller configurations to a commercial reference development board. By altering factors such as memory latencies and bus interconnect subsystem arbitration in co-simulations, the software cycle-count performance of the development board was shown possible to reproduce within a 5% error margin, at the cost of approximately 266 times slower execution speed. Furthermore, the validity of two HLS pre-synthesis hardware models is investigated and proven to be functionally accurate within three clock cycles of individual block latency compared to post-synthesis FPGA synthesized implementations. The final virtual prototype system consisted of the micro-controller and two cellular IoT hardware accelerators. The system runs a FreeRTOS 9.0.0 port, executing a multi-threaded program at an average clock cycle simulation frequency of 10.6 kHz.-Designing and simulating embedded computer systems virtually. Cellular internet of things (IoT) is a new technology that will enable the interconnection of everything: from street lights and parking meters to your gas or water meter at home, wireless cellular networks will allow information to be shared between devices. However, in order for these systems to provide any useful data, they need to include a computer chip with a system to manage the communication itself, enabling the connection to a cellular network and the actual transmission and reception of data. Such a chip is called an embedded chip or system. Traditionally, the design and verification of digital embedded systems, that is to say a system which has both hardware and software components, had to be done in two steps. The first step consists of designing all the hardware, testing it, integrating it and producing it physically on silicon in order to verify the intended functionality of all the components. The second step thus consists of taking the hardware that has been developed and designing the software: a program which will have to execute in complete compliance to the hardware that has been previously developed. This poses two main issues: the software engineers cannot begin their work properly until the hardware is finished, which makes the process very long, and the fact that the hardware has been printed on silicon greatly restricts the possibility of doing changes to accommodate late system requirement alterations; which is quite likely for a tailor-made application specific system such as a cellular IoT chip. A currently widespread technology used to mitigate the previously mentioned negative aspects of embedded design, is the employment of field-programmable gate array (FPGA) development boards which often contain a micro-controller (with a processor and some memories), and a gate array connected to it. The FPGA part consists of a lattice of digital logic gates which can be programmed to interconnect and represent the functionality of the hardware being designed. The processor can thus execute software instructions placed on the memories and the hardware being developed can be programmed into the gate array in order to integrate and verify a full hardware and software system. Nevertheless, this boards are expensive and limit the design to the hardware components available commercially in the different off-the-shelf models, e.g. a specific processor which might not be the desired one. Now imagine there is a way to design hardware components such as processors in the traditional way, however once the hardware has been implemented it can be integrated together with software without the need of printing a physical silicon chip specifically for this purpose. That would be extremely convenient and would save lots of time, would it not? Fortunately, this is already possible due to Electronic System Level (ESL) design, which is compilation of techniques that allow to design, simulate and partially verify a digital chip, all within any normal laptop or desktop computer. Moreover, some ESL tools such as the one investigated in this project, allow you to even simulate a program code written specifically for this hardware; this is known as virtual hardware software co-simulation. The reliability of simulation must however be considered when compared to a traditional two-step methodology or FPGA board usage to verify a full system. This is because a virtual hardware simulation can have several degrees of accuracy, depending on the specificity of component models that make up the virtual prototype of the digital system. Therefore, in order to use co-simulation techniques with a high degree of confidence for verification, the highest accuracy degree should be employed if possible to guarantee that what is being simulated will match the reality of a silicon implementation. The clock cycle-accurate level is one of the highest accuracy system simulation methods available, and it consists of representing the digital states of all hardware components such as signals and registers, in a cycle-by-cycle manner. By using the ARM SoC Designer ESL tool, we have co-designed and co-simulated several microcontrollers on a detailed, cycle-accurate level and confirmed its behaviour by comparing it to a physical reference target development board. Finally, a more complex virtual prototype of a cellular IoT system was also simulated, including a micro-controller running a a real-time operating system (RTOS), hardware accelerators and serial data interfacing. Parts of this virtual prototype where compared to an FPGA board to evaluate the pros and cons of incorporating virtual system simulation into the development cycle and to what extent can ESL methods substitute traditional verification techniques. The ease of interchanging hardware, simplicity of development, simulation speed and the level of debug capabilities available when developing in a virtual environment are some of the aspects of ARM SoC Designer discussed in this thesis. A more in depth description of the methodology and results can be found in the report titled "Virtual Cycle-accurate Hardware and Software Co-simulation Platform for Cellular IoT"

Addressing the Smart Systems Design Challenge: The SMAC Platform

This article presents the concepts, the organization, and the preliminary application results of SMAC, a smart systems co-design platform. The SMAC platform, which has been developed as Integrated Project (IP) of the 7th ICT Call under the Objective 3.2 \u201cSmart components and Smart Systems integration\u201d addresses the challenges of the integration of heterogeneous and conflicting domains that emerge in the design of smart systems. SMAC includes methodologies and EDA tools enabling multi-disciplinary and multi-scale modelling and design, simulation of multidomain systems, subsystems and components at different levels of abstraction, system integration and exploration for optimization of functional and non-functional metrics. The article presents the preliminary results obtained by adopting the SMAC platform for the design of a limb tracking smart system

Embedded Systems Requirements Verification Using HiLeS Designer

International audienceOne of the issues related to systems design is the early verification in first design steps: system specifications verification. Nowadays, it is common to use text-based specifications to begin a system design. However, these specifications cannot be verified until a software model is made. In this work, we show how can we use HiLeS Designer to model and verify, formally and by simulation an embedded system specification. This tool makes easier to build the model, using graphical concepts which are familiar to designers. It also helps to verify formally the structure and some logical behavior, and by simulation, it is possible to verify the consistence of the embedded system specification. We model and verify System Display Selector Requirements applying HiLeS Designer

SystemC Through the Looking Glass : Non-Intrusive Analysis of Electronic System Level Designs in SystemC

Due to the ever increasing complexity of hardware and hardware/software co-designs, developers strive for higher levels of abstractions in the early stages of the design flow. To address these demands, design at the Electronic System Level (ESL) has been introduced. SystemC currently is the de-facto standard for ESL design. The extraction of data from system designs written in SystemC is thereby crucial e.g. for the proper understanding of a given system. However, no satisfactory support of reflection/introspection of SystemC has been provided yet. Previously proposed methods for this purpose %introduced to achieve the goal nonetheless either focus on static aspects only, restrict the language means of SystemC, or rely on modifications of the compiler and/or parser. In this thesis, approaches that overcome these limitations are introduced, allowing the extraction of information from a given SystemC design without changing the SystemC library or the compiler. The proposed approaches retrieve both, static and dynamic (i.e. run-time) information

Hybrid Multiresolution Simulation & Model Checking: Network-On-Chip Systems

abstract: Designers employ a variety of modeling theories and methodologies to create functional models of discrete network systems. These dynamical models are evaluated using verification and validation techniques throughout incremental design stages. Models created for these systems should directly represent their growing complexity with respect to composition and heterogeneity. Similar to software engineering practices, incremental model design is required for complex system design. As a result, models at early increments are significantly simpler relative to real systems. While experimenting (verification or validation) on models at early increments are computationally less demanding, the results of these experiments are less trustworthy and less rewarding. At any increment of design, a set of tools and technique are required for controlling the complexity of models and experimentation. A complex system such as Network-on-Chip (NoC) may benefit from incremental design stages. Current design methods for NoC rely on multiple models developed using various modeling frameworks. It is useful to develop frameworks that can formalize the relationships among these models. Fine-grain models are derived using their coarse-grain counterparts. Moreover, validation and verification capability at various design stages enabled through disciplined model conversion is very beneficial. In this research, Multiresolution Modeling (MRM) is used for system level design of NoC. MRM aids in creating a family of models at different levels of scale and complexity with well-formed relationships. In addition, a variant of the Discrete Event System Specification (DEVS) formalism is proposed which supports model checking. Hierarchical models of Network-on-Chip components may be created at different resolutions while each model can be validated using discrete-event simulation and verified via state exploration. System property expressions are defined in the DEVS language and developed as Transducers which can be applied seamlessly for model checking and simulation purposes. Multiresolution Modeling with verification and validation capabilities of this framework complement one another. MRM manages the scale and complexity of models which in turn can reduces V&V time and effort and conversely the V&V helps ensure correctness of models at multiple resolutions. This framework is realized through extending the DEVS-Suite simulator and its applicability demonstrated for exemplar NoC models.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Power estimation of an ECDSA core applied in V2X scenarios using heterogeneous distributed simulation

Embedded systems are steadily growing in complexity and nowadays power consumption additionally plays an important role. Designing and exploring such systems embedded in its environment demand for holistic and efficient simulations. In this work we use a simulation framework based on the HLA (High-Level Architecture) and the modeling tool Ptolemy II to enable complex heterogeneous distributed simulations of embedded systems. In this context, we introduce a co-simulation based power estimation approach by integrating domain-specific simulators as well as off-the-shelf HDL simulator and synthesis tools. This enables cross-domain interaction and generation of realistic on-the-fly stimuli data for Register Transfer Level and Gate Level models as well as the gathering of power estimation data. We apply the framework to a Vehicle-2-X scenario evaluating an ECDSA signature processing core which ensures trustworthiness in vehicular wireless networks. To evaluate dynamic power reduction possibilities on application level we additionally introduce a V2X Message Evaluation technique to reduce signature verification efforts. It shows how realistic on-the-fly stimuli data obtained by the framework can improve the exploration and estimation of dynamic power consumption