Capacitive imaging technique for non-destructive evaluation (NDE)

This thesis describes the development and characterization of a novel NDE methodthe Capacitive Imaging (CI) technique. The CI technique employs a pair of (or multiple) electrodes to form a co-planar capacitor, and uses the fringing quasi-static electric field established across the electrodes to investigate specimens of interest. In general, the CI probe is sensitive to surface and hidden defects in insulating materials, and surface features on conducting materials. The CI technique is advantageous for its non-contact and non-invasive nature, and the capacitive coupling allows the CI technique to work on a wide variety of material properties. The theoretical background to the CI technique has been developed. It is shown that in the frequency range of operation (10 kHz to 1 MHz), the quasi-static approximation is valid and the Maxwell’s Equations describing the general electromagnetic phenomena can be simplified. The practical implementation of the CI system is based on this analysis, and it is shown that the CI technique has features that can complement techniques such as eddy current methods that are already established in NDE. The design principles of the CI probes that are required for an optimum imaging performance have been determined, by considering the key measures of the performance including the depth of penetration, the measurement sensitivity, the imaging resolution and the signal to noise ratio (SNR). It has been shown that the operation frequency is not an influential factor - the performance of the CI probe is determined primarily by the geometry of the probe (e.g. size/shape of the electrodes, separation between electrodes, guard electrodes etc.). Symmetric CI probes with triangular-shaped electrodes were identified as a good general purpose design. Finite Element (FE) models were constructed both in 2D and 3D in COMSOLTM to predict the electric field distributions from CI probes. Effects of thickness of specimen, liftoff distance and relative permittivity value etc were examined using the 2D models. The sensitivity distributions of different CI probes were obtained from the 3D models and were used to characterize the imaging ability of the given CI probes. The fundamental concepts of the CI technique have been experimentally validated in a series of scans where the defects were successfully imaged in insulating (Perspex) and conducting (e.g. Aluminium, Steel and carbon fibre composite) specimens. The detection of corrosion under insulation (CUI) has also been demonstrated. The imaging abilities were assessed by investigating various standard specimens under different situations. The CI technique was then successfully applied to various practical specimens, including glass fibre laminated composites and sandwich structures, laminated carbon fibre composites, corroded steel plate and pipe, and concrete specimens. Further measurements were also conducted using modified CI probes, to demonstrate the wide range of applications of the CI technique

Development of a smart sensor to measure moisture content in paper bulb using a capacitive sensor fringing field type based on print circuit board technology

Orientador: José Antonio Siqueira DiasDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: Sensores capacitivos são aqueles que trabalham baseados no funcionamento de um capacitor, ou seja, a formação de um campo elétrico a partir de dois eletrodos energizados e separados de forma específica por um material dielétrico, material este que, ao variar, promove variação no campo que por sua vez, promove alteração na corrente ou na tensão que passam pelos eletrodos. Estes recebem tensão ou corrente e/ou um ou outro retornam ao circuito de processamento, de maneira que a variação interpretada traduz a variação do meio em questão. A forma e os materiais construtivos dos eletrodos determinam o modo de funcionamento do sensor. O objetivo deste trabalho é construir um sensor capacitivo do tipo PCB - Print Circuit Board avaliando os resultados de várias amostragens para determinar a viabilidade deste dispositivo de medição. Os experimentos demonstrados indicaram leituras positivas de variação de capacitância em função de amostras de polpa com umidades entre 90 e 94% com significativa repetibilidade. Os desvios padrão calculados demonstraram a pequena dispersão em relação às amostrasAbstract: Capacitive sensors are sensors that work based on the capacitor principles, it means, an electric field is created from two energized wires with specific dielectric environment that can changes and due the changes can change the current or voltage that goes by through the wires. The wires that connect sensor and processor circuit deliver the current or voltage to the processor that defines the variation of the environment. The form and base materials of the sensors determine how the sensors work. The scope of this work is to build a capacitive sensor type PCB - "Print Circuit Boarding" and evaluate the results and feasibility of this type of capacitive sensor. The experiment had demonstrated positive results of capacitive variation face to samples of pulps with different levels of moisture between 90 and 94% with reasonable repeatability. The standard deviations were calculated and had demonstrated small spread regarding the samples indicating good work of the prototypeMestradoEletrônica, Microeletrônica e OptoeletrônicaMestre em Engenharia Elétric

Paper-based Screen-printed Passive Electronic Components

This thesis investigates paper-based electronics in terms of various substrates, fabrication methods and example devices, including touch sensors and microwave resonators. The term ‘paper’ is very broad and covers a wide range of substrates. A decision matrix has been created to determine the optimum paper for an application, based on a range of properties. Thermal evaporation and screen printing are compared for their use as fabrication methods for paper-based electronics and a second decision matrix has been compiled. Based on these decision matrices, screen printing onto a thicker matt paper was determined to be optimal. The printing process was further optimised to achieve the best results from the in-house process. Using this well-developed screen-printing method, passive components (including inductors and interdigitated capacitive touch sensors) were fabricated and found to be comparable with state-of-the- art results reported in the literature. Measurements from the touch pads were compared to modelling, with little variation between the two, and were confirmed to work under a wide range of conditions, showing that they are compatible with any user. The microwave characteristics, up to 3GHz, of both the chosen substrate and silver-flake ink were investigated through production of screen-printed transmission lines. These characteristics were then used to create microwave resonators. The frequency range is important for applications as the industrial, scientific and medical radio band (ISM band) lies between 2.45 and 2.55 GHz which includes Wi-Fi and Bluetooth. Initially, stub resonators were considered to determine the cause of differences between theoretical and measured results. Then spiral defected ground structures were made, with multiple resonances, and sensitivity to touch and humidity demonstrated. As paper is hygroscopic, the effect of humidity on paper-based electronics is of key importance. This has been considered for all the devices fabricated in this work and it has been determined that the change in permittivity of the substrate, as a result of absorbed water within paper, is the most dominant factor

Battery-less near field communications (nfc) sensors for internet of things (iot) applications

L’ implementació de la tecnologia de comunicació de camp proper (NFC) en els telèfons intel·ligents no para de créixer degut a l’ús d’aquesta per fer pagaments, això, junt amb el fet de poder aprofitar l’energia generada pel mòbil no només per la comunicació, sinó també per transmetre energia, el baix cost dels xips NFC, i el fet de que els telèfons tinguin connectivitat amb internet, possibilita i fa molt interesant el disseny d’etiquetes sense bateria incorporant-hi sensors i poder enviar la informació al núvol, dins del creixent escenari de l’internet de les coses (IoT). La present Tesi estudia la viabilitat d’aquests sensors, analitzant la màxima distància entre lector i sensor per proveir la potència necessària, presenta tècniques per augmentar el rang d’operació, i analitza els efectes de certs materials quan aquests estan propers a les antenes. Diversos sensors han estat dissenyats i analitzats i son presentats en aquest treball. Aquests son: Una etiqueta que mesura la humitat de la terra, la temperatura i la humitat relativa de l’aire per controlar les condicions de plantes. Un sensor per detectar la humitat en bolquers, imprès en material flexible que s’adapta a la forma del bolquer. Dues aplicacions, una per estimació de pH i una altre per avaluar el grau de maduració de fruites, basats en un sensor de color. I, per últim, s’estudia la viabilitat de sensors en implants per aplicacions mèdiques, analitzant l’efecte del cos i proposant un sistema per augmentar la profunditat a la que aquests es poden llegir utilitzant un telèfon mòbil. Tots aquests sensors poden ser alimentats i llegits per qualsevol dispositiu que disposin de connexió NFC.La implementación de la tecnología de comunicaciones de campo cercano (NFC) en los teléfonos inteligentes no para de crecer debido al uso de esta para llevar a cabo pagos, esto, junto con el hecho de poder aprovechar la energía generada por el móvil no sólo para la comunicación, sino también para transmitir energía, el bajo coste de los chips NFC, i el hecho que los teléfonos tengan conectividad a internet, posibilita y hace muy interesante el diseño de etiquetas sin batería que incorporen sensores i poder enviar la información a la nube, enmarcado en el creciente escenario del internet de las cosas (IoT). La presente Tesis estudia la viabilidad de estos sensores, analizando la máxima distancia entre lector i sensor para proveer la potencia necesaria, presenta técnicas para aumentar el rango de operación, y analiza los efectos de ciertos materiales cuando estos están cerca de las antenas. Varios sensores han sido diseñados y analizados y son presentados en este trabajo. Estos son: Una etiqueta que mide la humedad de la tierra, la temperatura y la humedad relativa del aire para controlar las condiciones de plantas. Un sensor para detectar la humedad en pañales, impreso en material flexible que se adapta a la forma del pañal. Dos aplicaciones, una para estimación de pH y otra para evaluar el grado de maduración de frutas, basados en un sensor de color. Y, por último, se estudia la viabilidad de sensores en implantes para aplicaciones médicas, analizando el efecto del cuerpo y proponiendo un sistema para aumentar la profundidad a la que estos se pueden leer usando un teléfono móvil. Todos estos sensores pueden ser alimentados y leídos por cualquier dispositivo que disponga de conexión NFC.The implementation of near field communication (NFC) technology into smartphones grows rapidly due the use of this technology as a payment system. This, altogether with the fact that the energy generated by the phone can be used not only to communicate but for power transfer as well, the low-cost of the NFC chips, and the fact that the smartphones have connectivity to internet, makes possible and very interesting the design of battery-less sensing tags which information can be sent to the cloud, within the growing internet of things (IoT) scenario. This Thesis studies the feasibility of these sensors, analysing the maximum distance between reader and sensor to provide the necessary power, presents techniques to increase the range of operation, and analyses the effects of certain materials when they are near to the antennas. Several sensors have been designed and analysed and are presented in this work. These are: a tag that measures the soil moisture, the temperature and the relative humidity of the air to control the conditions of plants. A moisture sensor for diapers, printed on flexible material that adapts to the diaper shape. Two applications, one for pH estimation and another for assessing the degree of fruit ripening, based on a colour sensor. And finally, the feasibility of sensors in implants for medical applications is studied, analysing the effect of the body and proposing a system to increase the depth at which they can be read using a mobile phone. All of these sensors can be powered and read by any NFC enabled device

Capacitive imaging technique for non-destructive evaluation (NDE)

This thesis describes the development and characterization of a novel NDE methodthe Capacitive Imaging (CI) technique. The CI technique employs a pair of (or multiple) electrodes to form a co-planar capacitor, and uses the fringing quasi-static electric field established across the electrodes to investigate specimens of interest. In general, the CI probe is sensitive to surface and hidden defects in insulating materials, and surface features on conducting materials. The CI technique is advantageous for its non-contact and non-invasive nature, and the capacitive coupling allows the CI technique to work on a wide variety of material properties. The theoretical background to the CI technique has been developed. It is shown that in the frequency range of operation (10 kHz to 1 MHz), the quasi-static approximation is valid and the Maxwell’s Equations describing the general electromagnetic phenomena can be simplified. The practical implementation of the CI system is based on this analysis, and it is shown that the CI technique has features that can complement techniques such as eddy current methods that are already established in NDE. The design principles of the CI probes that are required for an optimum imaging performance have been determined, by considering the key measures of the performance including the depth of penetration, the measurement sensitivity, the imaging resolution and the signal to noise ratio (SNR). It has been shown that the operation frequency is not an influential factor - the performance of the CI probe is determined primarily by the geometry of the probe (e.g. size/shape of the electrodes, separation between electrodes, guard electrodes etc.). Symmetric CI probes with triangular-shaped electrodes were identified as a good general purpose design. Finite Element (FE) models were constructed both in 2D and 3D in COMSOLTM to predict the electric field distributions from CI probes. Effects of thickness of specimen, liftoff distance and relative permittivity value etc were examined using the 2D models. The sensitivity distributions of different CI probes were obtained from the 3D models and were used to characterize the imaging ability of the given CI probes. The fundamental concepts of the CI technique have been experimentally validated in a series of scans where the defects were successfully imaged in insulating (Perspex) and conducting (e.g. Aluminium, Steel and carbon fibre composite) specimens. The detection of corrosion under insulation (CUI) has also been demonstrated. The imaging abilities were assessed by investigating various standard specimens under different situations. The CI technique was then successfully applied to various practical specimens, including glass fibre laminated composites and sandwich structures, laminated carbon fibre composites, corroded steel plate and pipe, and concrete specimens. Further measurements were also conducted using modified CI probes, to demonstrate the wide range of applications of the CI technique.EThOS - Electronic Theses Online ServiceUniversity of Warwick. School of EngineeringGBUnited Kingdo

Lab-on-PCB Devices

Lab-on-PCB devices can be considered an emerging technology. In fact, most of the contributions have been published during the last 5 years. It is mainly focussed on both biomedical and electronic applications. The book includes an interesting guide for using the different layers of the Printed Circuit Boards for developing new devices; guidelines for fabricating PCB-based electrochemical biosensors, and an overview of fluid manipulation devices fabricated using Printed Circuit Boards. In addition, current PCB-based devices are reported, and studies for several aspects of research and development of lab-on-PCB devices are described

New Directions in Impedance Spectroscopy for High Accuracy, Augmented Information Extraction and Low Power Implementation

This thesis provides new directions in the impedance spectroscopy, making it an interesting investigation technique for emerging smart sensors. Modern technologies increasingly require sensors capable of giving accurate measurements extracted among a lot of undesired surrounding information while maintaining low power consumptions. In this scenario, the main focuses of this thesis are: 1) developing an accurate complex impedance system, 2) extracting the augmented information using multivariate statistical analysis and 3) implementing IS-based systems with low power consumptions. The first project shows the design of a miniaturized, low power and accurate vector analyser for multi-parameter measurements in real-time. It is a versatile platform well-suited to be interfaced with various impedance-based sensors. The vector analyser, based on an accurate application specific integrated circuit and a digital interface, has been statistically characterized in order to evaluate accuracy and resolution. The validation of the entire system was performing on two real-time biomedical applications. The second project concerns the combination of powerful statistical methods inside moisture content sensors. The multivariate statistical approaches boost the prediction capability of the sensors exploiting the impedance mismatch between a transmitting and reflecting excitation on a soil. Two probe systems have been manufactured and associated with linear and non-linear models for being tested on three soil types. The third project shows a low-power implementation of an impedance sensor based on a digital random excitation. The entire system is almost digital, made up by an ultra-low power platform with the aim to become a wearable device. In future developments, these new investigated directions can be simultaneously applied in the design of IS based sensors which extract the desired information with high accuracy and reduced power budget. The potential of such improved system can be employed in a lot of smart sensors, involving electrochemical, environmental, food, biological applications and wearable devices

Passive low frequency RFID for non-destructive evaluation and monitoring

Ph. D ThesisDespite of immense research over the years, defect monitoring in harsh environmental conditions still presents notable challenges for Non-Destructive Testing and Evaluation (NDT&E) and Structural Health Monitoring (SHM). One of the substantial challenges is the inaccessibility to the metal surface due to the large stand-off distance caused by the insulation layer. The hidden nature of corrosion and defect under thick insulation in harsh environmental conditions may result in it being not noticed and ultimately leading to failures. Generally electromagnetic NDT&E techniques which are used in pipeline industries require the removal of the insulation layer or high powered expensive equipment. Along with these, other limitations in the existing techniques create opportunities for novel systems to solve the challenges caused by Corrosion under Insulation (CUI). Extending from Pulsed Eddy Current (PEC), this research proposes the development and use of passive Low Frequency (LF) RFID hardware system for the detection and monitoring of corrosion and cracks on both ferrous and non-ferrous materials at varying high temperature conditions. The passive, low cost essence of RFID makes it an enchanting technique for long term condition monitoring. The contribution of the research work can be summarised as follows: (1) implementation of novel LF RFID sensor systems and the rig platform, experimental studies validating the detection capabilities of corrosion progression samples using transient feature analysis with respect to permeability and electrical conductivity changes along with enhanced sensitivity demonstration using ferrite sheet attached to the tag; (2) defect detection using swept frequency method to study the multiple frequency behaviour and further temperature suppression using feature fusion technique; (3) inhomogeneity study on ferrous materials at varying temperature and demonstration of the potential of the RFID system; (4) use of RFID tag with ceramic filled Poly-tetra-fluoro-ethyulene (PTFE) substrate for larger applicability of the sensing system in the industry; (5) lift-off independent defect monitoring using passive sweep frequency RFID sensors and feature extraction and fusion for robustness improvement. This research concludes that passive LF RFID system can be used to detect corrosion and crack on both ferrous and non-ferrous materials and then the system can be used to compensate for temperature variation making it useful for a wider range of applications. However, significant challenges such as permanent deployment of the tags for long term monitoring at higher temperatures and much higher standoff distance, still require improvement for real-world applicability.Engineering and Physical Sciences Research Council (EPSRC) CASE, National Nuclear Laboratory (NNL)

Advances in the Field of Electrical Machines and Drives

Electrical machines and drives dominate our everyday lives. This is due to their numerous applications in industry, power production, home appliances, and transportation systems such as electric and hybrid electric vehicles, ships, and aircrafts. Their development follows rapid advances in science, engineering, and technology. Researchers around the world are extensively investigating electrical machines and drives because of their reliability, efficiency, performance, and fault-tolerant structure. In particular, there is a focus on the importance of utilizing these new trends in technology for energy saving and reducing greenhouse gas emissions. This Special Issue will provide the platform for researchers to present their recent work on advances in the field of electrical machines and drives, including special machines and their applications; new materials, including the insulation of electrical machines; new trends in diagnostics and condition monitoring; power electronics, control schemes, and algorithms for electrical drives; new topologies; and innovative applications