Reconnection–less Reconfigurable Fractional–Order Current–Mode Integrator Design with Simple Control

A design of a fractional-order (FO) integrator is introduced for operation of resulting solution in the current mode (CM). The solution of the integrator is based on the utilization of RC structures, but in comparison to other RC structure based FO designs, the proposed integrator offers the electronic control of the order. Moreover, the control of the proposed integrator does not require multiple specific and accurate values of the control voltages/currents in comparison to the topologies based on the approximation of the FO Laplacian operator. The electronic control of a gain level (gain adjustment) of the proposed integrator is available. The paper offers the results of Cadence IC6 (spectre) simulations and more importantly experimental measurements to support the presented design. The proposed integrator can be used to build various FO circuits as demonstrated by the utilization of the integrator into a structure of a frequency filter in order to provide FO characteristics

Analysis and implementation of fractional-order chaotic system with standard components

This paper is devoted to the problem of uncertainty in fractional-order Chaotic systems implemented by means of standard electronic components. The fractional order element (FOE) is typically substituted by one complex impedance network containing a huge number of discrete resistors and capacitors. In order to balance the complexity and accuracy of the circuit, a sparse optimization based parameter selection method is proposed. The random error and the uncertainty of system implementation are analyzed through numerical simulations. The effectiveness of the method is verified by numerical and circuit simulations, tested experimentally with electronic circuit implementations. The simulations and experiments show that the proposed method reduces the order of circuit systems and finds a minimum number for the combination of commercially available standard components.This work was supported in part by the National Natural Science Foundation of China under Grant 61501385, in part by the National Nuclear Energy Development Project of State Administration for Science, Technology and Industry for National Defense, PRC under Grant 18zg6103, and in part by Sichuan Science and Technology Program under Grant 2018JY0522. We would like to thank Xinghua Feng for meaningful discussion.info:eu-repo/semantics/publishedVersio

Analysis and implementation of fractional-order chaotic system with standard components

This paper is devoted to the problem of uncertainty in fractional-order Chaotic systems implemented by means of standard electronic components. The fractional order element (FOE) is typically substituted by one complex impedance network containing a huge number of discrete resistors and capacitors. In order to balance the complexity and accuracy of the circuit, a sparse optimization based parameter selection method is proposed. The random error and the uncertainty of system implementation are analyzed through numerical simulations. The effectiveness of the method is verified by numerical and circuit simulations, tested experimentally with electronic circuit implementations. The simulations and experiments show that the proposed method reduces the order of circuit systems and finds a minimum number for the combination of commercially available standard components.This work was supported in part by the National Natural Science Foundation of China under Grant 61501385, in part by the National Nuclear Energy Development Project of State Administration for Science, Technology and Industry for National Defense, PRC under Grant 18zg6103, and in part by Sichuan Science and Technology Program under Grant 2018JY0522. We would like to thank Xinghua Feng for meaningful discussion.info:eu-repo/semantics/publishedVersio

Design of a Fractional Order Low-pass Filter Using a Differential Voltage Current Conveyor, Journal of Telecommunications and Information Technology, 2023, nr 2

In this paper, an active implementation of a differential voltage current conveyor (DVCC) based on a low-pass filter operating in the fractional order domain is presented. The transfer function for a fractional order system is dependent on the rational approximation of sα. Different methods used for calculating the rational approximation, including Carlson, Elkhazalil, and curve fitting, are evaluated here. Finally, to validate the theoretical results, a fractional order Butterworth filter is simulated in the Pspice environment using the 0.5 micrometer CMOS technology with an R-C network-based fractional order capacitor. Additionally, using the Monte Carlo analysis, the impact of current and voltage faults on DVCC response is investigated. It has been inferred that realization with a wider bandwidth is possible

Digital Filter Design Using Improved Artificial Bee Colony Algorithms

Digital filters are often used in digital signal processing applications. The design objective of a digital filter is to find the optimal set of filter coefficients, which satisfies the desired specifications of magnitude and group delay responses. Evolutionary algorithms are population-based meta-heuristic algorithms inspired by the biological behaviors of species. Compared to gradient-based optimization algorithms such as steepest descent and Newton’s like methods, these bio-inspired algorithms have the advantages of not getting stuck at local optima and being independent of the starting point in the solution space. The limitations of evolutionary algorithms include the presence of control parameters, problem specific tuning procedure, premature convergence and slower convergence rate. The artificial bee colony (ABC) algorithm is a swarm-based search meta-heuristic algorithm inspired by the foraging behaviors of honey bee colonies, with the benefit of a relatively fewer control parameters. In its original form, the ABC algorithm has certain limitations such as low convergence rate, and insufficient balance between exploration and exploitation in the search equations. In this dissertation, an ABC-AMR algorithm is proposed by incorporating an adaptive modification rate (AMR) into the original ABC algorithm to increase convergence rate by adjusting the balance between exploration and exploitation in the search equations through an adaptive determination of the number of parameters to be updated in every iteration. A constrained ABC-AMR algorithm is also developed for solving constrained optimization problems.There are many real-world problems requiring simultaneous optimizations of more than one conflicting objectives. Multiobjective (MO) optimization produces a set of feasible solutions called the Pareto front instead of a single optimum solution. For multiobjective optimization, if a decision maker’s preferences can be incorporated during the optimization process, the search process can be confined to the region of interest instead of searching the entire region. In this dissertation, two algorithms are developed for such incorporation. The first one is a reference-point-based MOABC algorithm in which a decision maker’s preferences are included in the optimization process as the reference point. The second one is a physical-programming-based MOABC algorithm in which physical programming is used for setting the region of interest of a decision maker. In this dissertation, the four developed algorithms are applied to solve digital filter design problems. The ABC-AMR algorithm is used to design Types 3 and 4 linear phase FIR differentiators, and the results are compared to those obtained by the original ABC algorithm, three improved ABC algorithms, and the Parks-McClellan algorithm. The constrained ABC-AMR algorithm is applied to the design of sparse Type 1 linear phase FIR filters of filter orders 60, 70 and 80, and the results are compared to three state-of-the-art design methods. The reference-point-based multiobjective ABC algorithm is used to design of asymmetric lowpass, highpass, bandpass and bandstop FIR filters, and the results are compared to those obtained by the preference-based multiobjective differential evolution algorithm. The physical-programming-based multiobjective ABC algorithm is used to design IIR lowpass, highpass and bandpass filters, and the results are compared to three state-of-the-art design methods. Based on the obtained design results, the four design algorithms are shown to be competitive as compared to the state-of-the-art design methods

Analog Implementation of Fractional-Order Elements and Their Applications

With advancements in the theory of fractional calculus and also with widespread engineering application of fractional-order systems, analog implementation of fractional-order integrators and differentiators have received considerable attention. This is due to the fact that this powerful mathematical tool allows us to describe and model a real-world phenomenon more accurately than via classical “integer” methods. Moreover, their additional degree of freedom allows researchers to design accurate and more robust systems that would be impractical or impossible to implement with conventional capacitors. Throughout this thesis, a wide range of problems associated with analog circuit design of fractional-order systems are covered: passive component optimization of resistive-capacitive and resistive-inductive type fractional-order elements, realization of active fractional-order capacitors (FOCs), analog implementation of fractional-order integrators, robust fractional-order proportional-integral control design, investigation of different materials for FOC fabrication having ultra-wide frequency band, low phase error, possible low- and high-frequency realization of fractional-order oscillators in analog domain, mathematical and experimental study of solid-state FOCs in series-, parallel- and interconnected circuit networks. Consequently, the proposed approaches in this thesis are important considerations in beyond the future studies of fractional dynamic systems