Benets of tight coupled architectures for the integration of GNSS receiver and Vanet transceiver

Vehicular adhoc networks (VANETs) are one emerging type of networks that will enable a broad range of applications such as public safety, traffic management, traveler information support and entertain ment. Whether wireless access may be asynchronous or synchronous (respectively as in the upcoming IEEE 8021.11p standard or in some alternative emerging solutions), a synchronization among nodes is required. Moreover, the information on position is needed to let vehicular services work and to correctly forward the messages. As a result, timing and positioning are a strong prerequisite of VANETs. Also the diffusion of enhanced GNSS Navigators paves the way to the integration between GNSS receivers and VANET transceiv ers. This position paper presents an analysis on potential benefits coming from a tightcoupling between the two: the dissertation is meant to show to what extent Intelligent Transportation System (ITS) services could benefit from the proposed architectur

Cooperative inter-vehicle communication protocol with low cost differential GPS

This paper describes a cooperative MANET protocol dedicated to intelligent transport systems, named CIVIC (Communication Inter Véhicule Intelligente et Coopérative). The CIVIC protocol is an auto-configuration inter-vehicle communication protocol, which supports adhoc and infrastructure networks, contains reactive and proactive routing components, and adapts different wireless standards. It is a context-aware protocol reacting to vehicle status, road traffic, and geographic environment. It supports location-based communication. To improve the accuracy of GPS, it integrates a localization solution called LCD-GPS (Low Cost Differential GPS). It has been implemented and experimented on the LiveNode sensor developed by our lab. At the end of this paper, an application project MobiPlus is introduced

Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks

Tesis por compendioProducts related with Intelligent Transportation Systems (ITS) are becoming a reality on our roads. All car manufacturers are starting to include Internet access in their vehicles and to integrate smartphones directly from the dashboard, but more and more services will be introduced in the near future. Connectivity through "vehicular networks" will become a cornerstone of every new proposal, and offering an adequate quality of service is obviously desirable. However, a lot of work is needed for vehicular networks to offer performances similar to those of the wired networks. Vehicular networks can be characterized by two main features: high variability due to mobility levels that can reach up to 250 kilometers per hour, and heterogeneity, being that various competing versions from different vendors have and will be released. Therefore, to make the deployment of efficient services possible, an extensive study must be carried out and adequate tools must be proposed and developed. This PhD thesis addresses the service deployment problem in these networks at three different levels: (i) the physical and link layer, showing an exhaustive analysis of the physical channel and models; (ii) the network layer, proposing a forwarding protocol for IP packets; and (iii) the transport layer, where protocols are proposed to improve data delivery. First of all, the two main wireless technologies used in vehicular networks where studied and modeled, namely the 802.11 family of standards, particularly 802.11p, and the cellular networks focusing on LTE. Since 802.11p is a quite mature standard, we defined (i) a propagation and attenuation model capable of replicating the transmission range and the fading behavior of real 802.11p devices, both in line-of-sight conditions and when obstructed by small obstacles, and (ii) a visibility model able to deal with large obstacles, such as buildings and houses, in a realistic manner. Additionally, we proposed a model based on high-level performance indicators (bandwidth and delay) for LTE, which makes application validation and evaluation easier. At the network layer, a hybrid protocol called AVE is proposed for packet forwarding by switching among a set of standard routing strategies. Depending on the specific scenario, AVE selects one out of four different routing solutions: a) two-hop direct delivery, b) Dynamic MANET On-demand (DYMO), c) greedy georouting, and d) store-carry-and-forward technique, to dynamically adapt its behavior to the specific situation. At the transport layer, we proposed a content delivery protocol for reliable and bidirectional unicast communication in lossy links that improves content delivery in situations where the wireless network is the bottleneck. It has been designed, validated, optimized, and its performance has been analyzed in terms of throughput and resource efficiency. Finally, at system level, we propose an edge-assisted computing model that allows reducing the response latency of several queries by placing a computing unit at the network edge. This way, traffic traversal through the Internet is avoided when not needed. This scheme could be used in both 802.11p and cellular networks, and in this thesis we decided to focus on its evaluation using LTE networks. The platform presented in this thesis combines all the individual efforts to create a single efficient platform. This new environment could be used by any provider to improve the quality of the user experience obtainable through the proposed vehicular network-based services.Los productos relacionados con los Sistemas Inteligentes de Transporte (ITS) se están transformando en una realidad en nuestras carreteras. Todos los fabricantes de coches comienzan a incluir acceso a internet en sus vehículos y a facilitar su integración con los teléfonos móviles, pero más y más servicios se introducirán en el futuro. La conectividad usando las "redes vehiculares" se convertirá en la piedra angular de cada nueva propuesta, y ofrecer una calidad de servicio adecuada será, obviamente, deseable. Sin embargo, se necesita una gran cantidad de trabajo para que las redes vehiculares ofrezcan un rendimiento similar al de las redes cableadas. Las redes vehiculares quedan definidas por sus dos características básicas: alto dinamismo, pues los nodos pueden alcanzar una velocidad relativa de más de 250 km/h; y heterogeneidad, por la gran cantidad de propuestas diferentes que los fabricantes están lanzando al mercado. Por ello, para hacer posible el despliegue de servicios sobre ellas, se impone la necesidad de hacer un estudio en profundidad de este entorno, y deben de proponerse y desarrollarse las herramientas adecuadas. Esta tesis ataca la problemática del despliegue de servicios en estas redes a tres niveles diferentes: (i) el nivel físico y de enlace, mostrando varios análisis en profundidad del medio físico y modelos derivados para su simulación; (ii) el nivel de red, proponiendo un protocolo de difusión de la información para los paquetes IP; y (iii) el nivel de transporte, donde otros protocolos son propuestos para mejorar el rendimiento del transporte de datos. En primer lugar, se han estudiado y modelado las dos principales tecnologías inalámbricas que se utilizan para la comunicación en redes vehiculares, la rama de estándares 802.11, en concreto 802.11p; y la comunicación celular, en particular LTE. Dado que el estándar 802.11p es un estándar bastante maduro, nos centramos en crear (i) un modelo de propagación y atenuación capaz de replicar el rango de transmisión de dispositivos 802.11p reales, en condiciones de visión directa y obstrucción por pequeños obstáculos, y (ii) un modelo de visibilidad capaz de simular el efecto de grandes obstáculos, como son los edifcios, de una manera realista. Además, proponemos un modelo basado en indicadores de rendimiento de alto nivel (ancho de banda y retardo) para LTE, que facilita la validación y evaluación de aplicaciones. En el plano de red, se propone un protocolo híbrido, llamado AVE, para el encaminamiento y reenvío de paquetes usando un conjunto de estrategias estándar de enrutamiento. Dependiendo del escenario, AVE elige entre cuatro estrategias diferentes: a) entrega directa a dos saltos, b) Dynamic MANET On-demand (DYMO) c) georouting voraz, y d) una técnica store-carry-and- forward, para adaptar su comportamiento dinámicamente a cada situación. En el plano de transporte, se propone un protocolo bidireccional de distribución de contenidos en canales con pérdidas que mejora la entrega de contenidos en situaciones en las que la red es un cuello de botella, como las redes inalámbricas. Ha sido diseñado, validado, optimizado, y su rendimiento ha sido analizado en términos de productividad y eficiencia en la utilización de recursos. Finalmente, a nivel de sistema, proponemos un modelo de computación asistida que permite reducir la latencia en la respuesta a muchas consultas colocando una unidad de computación en el borde de la red, i.e., la red de acceso. Este esquema podría ser usado en redes basadas en 802.11p y en redes celulares, si bien en esta tesis decidimos centrarnos en su evaluación usando redes LTE. La plataforma presentada en esta tesis combina todos los esfuerzos individuales para crear una plataforma única y eficiente. Este nuevo entorno puede ser usado por cualquier proveedor para mejorar la calidad de la experiencia de usuario en los servicios desplegados sobre redes vehiculares.Els productes relacionats amb els sistemes intel · ligents de transport (ITS) s'estan transformant en una realitat en les nostres carreteres. Tots els fabri- cants de cotxes comencen a incloure accés a internet en els vehicles i a facilitar- ne la integració amb els telèfons mòbils, però en el futur més i més serveis s'hi introduiran. La connectivitat usant les xarxes vehicular esdevindrà la pedra angular de cada nova proposta, i oferir una qualitat de servei adequada serà, òbviament, desitjable. No obstant això, es necessita una gran quantitat de treball perquè les xarxes vehiculars oferisquen un rendiment similar al de les xarxes cablejades. Les xarxes vehiculars queden definides per dues característiques bàsiques: alt dinamisme, ja que els nodes poden arribar a una velocitat relativa de més de 250 km/h; i heterogeneïtat, per la gran quantitat de propostes diferents que els fabricants estan llançant al mercat. Per això, per a fer possible el desplegament de serveis sobre aquestes xarxes, s'imposa la necessitat de fer un estudi en profunditat d'aquest entorn, i cal proposar i desenvolupar les eines adequades. Aquesta tesi ataca la problemàtica del desplegament de serveis en aquestes xarxes a tres nivells diferents: (i) el nivell físic i d'enllaç , mostrant diverses anàlisis en profunditat del medi físic i models derivats per simular-lo; (ii) el nivell de xarxa, proposant un protocol de difusió de la informació per als paquets IP; i (iii) el nivell de transport, on es proposen altres protocols per a millorar el rendiment del transport de dades. En primer lloc, s'han estudiat i modelat les dues principals tecnologies sense fils que s'utilitzen per a la comunicació en xarxes vehiculars, la branca d'estàndards 802.11, en concret 802.11p; i la comunicació cel · lular, en partic- ular LTE. Atès que l'estàndard 802.11p és un estàndard bastant madur, ens centrem a crear (i) un model de propagació i atenuació capaç de replicar el rang de transmissió de dispositius 802.11p reals, en condicions de visió directa i obstrucció per petits obstacles, i (ii) un model de visibilitat capaç de simular l'efecte de grans obstacles, com són els edificis, d'una manera realista. A més, proposem un model basat en indicadors de rendiment d'alt nivell (ample de banda i retard) per a LTE, que facilita la validació i l'avaluació d'aplicacions. En el pla de xarxa, es proposa un protocol híbrid, anomenat AVE, per a l'encaminament i el reenviament de paquets usant un conjunt d'estratègies estàndard d'encaminament. Depenent de l'escenari , AVE tria entre quatre estratègies diferents: a) lliurament directe a dos salts, b) Dynamic MANET On-demand (DYMO) c) georouting voraç, i d) una tècnica store-carry-and- forward, per a adaptar-ne el comportament dinàmicament a cada situació. En el pla de transport, es proposa un protocol bidireccional de distribució de continguts en canals amb pèrdues que millora el lliurament de continguts en situacions en què la xarxa és un coll de botella, com les xarxes sense fils. Ha sigut dissenyat, validat, optimitzat, i el seu rendiment ha sigut analitzat en termes de productivitat i eficiència en la utilització de recursos. Finalment, a nivell de sistema, proposem un model de computació assistida que permet reduir la latència en la resposta a moltes consultes col · locant una unitat de computació a la vora de la xarxa, és a dir, la xarxa d'accés. Aquest esquema podria ser usat en xarxes basades en 802.11p i en xarxes cel · lulars, si bé en aquesta tesi decidim centrar-nos en la seua avaluació usant xarxes LTE. La plataforma presentada en aquesta tesi combina tots els esforços indi- viduals per a crear una plataforma única i eficient. Aquest nou entorn pot ser usat per qualsevol proveïdor per a millorar la qualitat de l'experiència d'usuari en els serveis desplegats sobre xarxes vehiculars.Báguena Albaladejo, M. (2017). Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/85333TESISCompendi

Robust streaming in delay tolerant networks

Delay Tolerant Networks (DTN) do not provide any end to end connectivity guarantee. Thus, transporting data over such networks is a tough challenge as most of Internet applications assume a form of persistent end to end connection. While research in DTN has mainly addressed the problem of routing in various mobility contexts with the aim to improve bundle delay delivery and data delivery ratio, little attention has been paid to applications. This paper investigates the support of streaming-like applications over DTN. We identify how DTN characteristics impact on the overall performances of these applications and present Tetrys, a transport layer mechanism, which enables robust streaming over DTN. Tetrys is based on an on the fly coding mechanism able to ensure full reliability without retransmission and fast in-order bundle delivery in comparison to classical erasure coding schemes. We evaluate our Tetrys prototype on real DTN connectivity traces captured from the Rollerblading tour in Paris. Simulations show that on average, Tetrys clearly outperforms all other reliability schemes in terms of bundles delivery service

Multicast routing strategy for SDN-cluster based MANET

The energy limitation and frequent movement of the mobile Ad hoc network (MANET) nodes (i.e., devices) make the routing process very difficult. The multicast routing problem is one of the NP-complete problems. Therefore, the need for a new power-aware approach to select an optimum multicast path with minimum power consumption that can enhance the performance and increase the lifetime of MANET has become urgent. Software defined network (SDN) is a new technique that can solve many problems of the traditional networks by dividing the architecture into data part and control part. This paper presents three power-aware multicast routing strategies for MANET. First one called a Reactive Multicast routing strategy for cluster based MANET by using SDN (RMCMS), second one called proactive multicast routing strategy for cluster based MANET by using SDN (PMCMS) and third one represents modification of PMCMS called M-PMCMS. Moreover, it produces a new mathematical model to build a multicast tree with minimum power consumption and takes into account the remaining power in each node. All proposed multicast strategies operate based on this mathematical model and aim to maximize the MANET lifetime by exploiting the advantages of SDN and clustering concepts. They consider the multicast tree with minimum power consumption as an optimal one. The simulation results illustrated that RMCMS is better than PMCMS, M-PMCMS, and MAODV in terms of power consumption and network overhead while M-PMCMS is the best one in terms of dropped packets ratio (DPR) and average end to end (E2E) delay

Airborne Directional Networking: Topology Control Protocol Design

This research identifies and evaluates the impact of several architectural design choices in relation to airborne networking in contested environments related to autonomous topology control. Using simulation, we evaluate topology reconfiguration effectiveness using classical performance metrics for different point-to-point communication architectures. Our attention is focused on the design choices which have the greatest impact on reliability, scalability, and performance. In this work, we discuss the impact of several practical considerations of airborne networking in contested environments related to autonomous topology control modeling. Using simulation, we derive multiple classical performance metrics to evaluate topology reconfiguration effectiveness for different point-to-point communication architecture attributes for the purpose of qualifying protocol design elements

Bandwidth and Energy-Efficient Route Discovery for Noisy Mobile Ad-Hoc Networks

Broadcasting is used in on-demand routing protocols to discover routes in Mobile Ad-hoc Networks (MANETs). On-demand routing protocols, such as Ad-hoc On-demand Distance Vector (AODV) commonly employ pure flooding based broadcasting to discover new routes. In pure flooding, a route request (RREQ) packet is broadcast by the source node and each receiving node rebroadcasts it. This continues until the RREQ packet arrives at the destination node. Pure flooding generates excessive redundant routing traffic that may lead to the broadcast storm problem (BSP) and deteriorate the performance of MANETs significantly. A number of probabilistic broadcasting schemes have been proposed in the literature to address BSP. However, these schemes do not consider thermal noise and interference which exist in real life MANETs, and therefore, do not perform well in real life MANETs. Real life MANETs are noisy and the communication is not error free. This research argues that a broadcast scheme that considers the effects of thermal noise, co-channel interference, and node density in the neighbourhood simultaneously can reduce the broadcast storm problem and enhance the MANET performance. To achieve this, three investigations have been carried out: First, the effect of carrier sensing ranges on on-demand routing protocol such as AODV and their impact on interference; second, effects of thermal noise on on-demand routing protocols and third, evaluation of pure flooding and probabilistic broadcasting schemes under noisy and noiseless conditions. The findings of these investigations are exploited to propose a Channel Adaptive Probabilistic Broadcast (CAPB) scheme to disseminate RREQ packets efficiently. The proposed CAPB scheme determines the probability of rebroadcasting RREQ packets on the fly according to the current Signal to Interference plus Noise Ratio (SINR) and node density in the neighbourhood. The proposed scheme and two related state of the art (SoA) schemes from the literature are implemented in the standard AODV to replace the pure flooding based broadcast scheme. Ns-2 simulation results show that the proposed CAPB scheme outperforms the other schemes in terms of routing overhead, average end-to-end delay, throughput and energy consumption

Mobile Ad Hoc Networks

Guiding readers through the basics of these rapidly emerging networks to more advanced concepts and future expectations, Mobile Ad hoc Networks: Current Status and Future Trends identifies and examines the most pressing research issues in Mobile Ad hoc Networks (MANETs). Containing the contributions of leading researchers, industry professionals, and academics, this forward-looking reference provides an authoritative perspective of the state of the art in MANETs. The book includes surveys of recent publications that investigate key areas of interest such as limited resources and the mobility of mobile nodes. It considers routing, multicast, energy, security, channel assignment, and ensuring quality of service. Also suitable as a text for graduate students, the book is organized into three sections: Fundamentals of MANET Modeling and Simulation—Describes how MANETs operate and perform through simulations and models Communication Protocols of MANETs—Presents cutting-edge research on key issues, including MAC layer issues and routing in high mobility Future Networks Inspired By MANETs—Tackles open research issues and emerging trends Illustrating the role MANETs are likely to play in future networks, this book supplies the foundation and insight you will need to make your own contributions to the field. It includes coverage of routing protocols, modeling and simulations tools, intelligent optimization techniques to multicriteria routing, security issues in FHAMIPv6, connecting moving smart objects to the Internet, underwater sensor networks, wireless mesh network architecture and protocols, adaptive routing provision using Bayesian inference, and adaptive flow control in transport layer using genetic algorithms

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: vehicular ad-hoc networks, security and caching, TCP in ad-hoc networks and emerging applications. It is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks