Random Linear Network Coding for 5G Mobile Video Delivery

An exponential increase in mobile video delivery will continue with the demand for higher resolution, multi-view and large-scale multicast video services. Novel fifth generation (5G) 3GPP New Radio (NR) standard will bring a number of new opportunities for optimizing video delivery across both 5G core and radio access networks. One of the promising approaches for video quality adaptation, throughput enhancement and erasure protection is the use of packet-level random linear network coding (RLNC). In this review paper, we discuss the integration of RLNC into the 5G NR standard, building upon the ideas and opportunities identified in 4G LTE. We explicitly identify and discuss in detail novel 5G NR features that provide support for RLNC-based video delivery in 5G, thus pointing out to the promising avenues for future research.Comment: Invited paper for Special Issue "Network and Rateless Coding for Video Streaming" - MDPI Informatio

Improving Network Performance Through Endpoint Diagnosis And Multipath Communications

Components of networks, and by extension the internet can fail. It is, therefore, important to find the points of failure and resolve existing issues as quickly as possible. Resolution, however, takes time and its important to maintain high quality of service (QoS) for existing clients while it is in progress. In this work, our goal is to provide clients with means of avoiding failures if/when possible to maintain high QoS while enabling them to assist in the diagnosis process to speed up the time to recovery. Fixing failures relies on first detecting that there is one and then identifying where it occurred so as to be able to remedy it. We take a two-step approach in our solution. First, we identify the entity (Client, Server, Network) responsible for the failure. Next, if a failure is identified as network related additional algorithms are triggered to detect the device responsible. To achieve the first step, we revisit the question: how much can you infer about a failure using TCP statistics collected at one of the endpoints in a connection? Using an agent that captures TCP statistics at one of the end points we devise a classification algorithm that identifies the root cause of failures. Using insights derived from this classification algorithm we identify dominant TCP metrics that indicate where/why problems occur. If/when a failure is identified as a network related problem, the second step is triggered, where the algorithm uses additional information that is collected from ``failed\u27\u27 connections to identify the device which resulted in the failure. Failures are also disruptive to user\u27s performance. Resolution may take time. Therefore, it is important to be able to shield clients from their effects as much as possible. One option for avoiding problems resulting from failures is to rely on multiple paths (they are unlikely to go bad at the same time). The use of multiple paths involves both selecting paths (routing) and using them effectively. The second part of this thesis explores the efficacy of multipath communication in such situations. It is expected that multi-path communications have monetary implications for the ISP\u27s and content providers. Our solution, therefore, aims to minimize such costs to the content providers while significantly improving user performance

Reactive traffic control mechanisms for communication networks with self-similar bandwidth demands

Communication network architectures are in the process of being redesigned so that many different services are integrated within the same network. Due to this integration, traffic management algorithms need to balance the requirements of the traffic which the algorithms are directly controlling with Quality of Service (QoS) requirements of other classes of traffic which will be encountered in the network. Of particular interest is one class of traffic, termed elastic traffic, that responds to dynamic feedback from the network regarding the amount of available resources within the network. Examples of this type of traffic include the Available Bit Rate (ABR) service in Asynchronous Transfer Mode (ATM) networks and connections using Transmission Control Protocol (TCP) in the Internet. Both examples aim to utilise available bandwidth within a network. Reactive traffic management, like that which occurs in the ABR service and TCP, depends explicitly on the dynamic bandwidth requirements of other traffic which is currently using the network. In particular, there is significant evidence that a wide range of network traffic, including Ethernet, World Wide Web, Varible Bit Rate video and signalling traffic, is self-similar. The term self-similar refers to the particular characteristic of network traffic to remain bursty over a wide range of time scales. A closely associated characteristic of self-similar traffic is its long-range dependence (LRD), which refers to the significant correlations that occur with the traffic. By utilising these correlations, greater predictability of network traffic can be achieved, and hence the performance of reactive traffic management algorithms can be enhanced. A predictive rate control algorithm, called PERC (Predictive Explicit Rate Control), is proposed in this thesis which is targeted to the ABR service in ATM networks. By incorporating the LRD stochastic structure of background traffic, measurements of the bandwidth requirements of background traffic, and the delay associated with a particular ABR connection, a predictive algorithm is defined which provides explicit rate information that is conveyed to ABR sources. An enhancement to PERC is also described. This algorithm, called PERC+, uses previous control information to correct prediction errors that occur for connections with larger round-trip delay. These algorithms have been extensively analysed with regards to their network performance, and simulation results show that queue lengths and cell loss rates are significantly reduced when these algorithms are deployed. An adaptive version of PERC has also been developed using real-time parameter estimates of self-similar traffic. This has excellent performance compared with standard ABR rate control algorithms such as ERICA. Since PERC and its enhancement PERC+ have explicitly utilised the index of self-similarity, known as the Hurst parameter, the sensitivity of these algorithms to this parameter can be determined analytically. Research work described in this thesis shows that the algorithms have an asymmetric sensitivity to the Hurst parameter, with significant sensitivity in the region where the parameter is underestimated as being close to 0.5. Simulation results reveal the same bias in the performance of the algorithm with regards to the Hurst parameter. In contrast, PERC is insensitive to estimates of the mean, using the sample mean estimator, and estimates of the traffic variance, which is due to the algorithm primarily utilising the correlation structure of the traffic to predict future bandwidth requirements. Sensitivity analysis falls into the area of investigative research, but it naturally leads to the area of robust control, where algorithms are designed so that uncertainty in traffic parameter estimation or modelling can be accommodated. An alternative robust design approach, to the standard maximum entropy approach, is proposed in this thesis that uses the maximum likelihood function to develop the predictive rate controller. The likelihood function defines the proximity of a specific traffic model to the traffic data, and hence gives a measure of the performance of a chosen model. Maximising the likelihood function leads to optimising robust performance, and it is shown, through simulations, that the system performance is close to the optimal performance as compared with maximising the spectral entropy. There is still debate regarding the influence of LRD on network performance. This thesis also considers the question of the influence of LRD on traffic predictability, and demonstrates that predictive rate control algorithms that only use short-term correlations have close performance to algorithms that utilise long-term correlations. It is noted that predictors based on LRD still out-perform ones which use short-term correlations, but that there is Potential simplification in the design of predictors, since traffic predictability can be achieved using short-term correlations. This thesis forms a substantial contribution to the understanding of control in the case where self-similar processes form part of the overall system. Rather than doggedly pursuing self-similar control, a broader view has been taken where the performance of algorithms have been considered from a number of perspectives. A number of different research avenues lead on from this work, and these are outlined

Methods of Congestion Control for Adaptive Continuous Media

Since the first exchange of data between machines in different locations in early 1960s, computer networks have grown exponentially with millions of people now using the Internet. With this, there has also been a rapid increase in different kinds of services offered over the World Wide Web from simple e-mails to streaming video. It is generally accepted that the commonly used protocol suite TCP/IP alone is not adequate for a number of modern applications with high bandwidth and minimal delay requirements. Many technologies are emerging such as IPv6, Diffserv, Intserv etc, which aim to replace the onesize-fits-all approach of the current lPv4. There is a consensus that the networks will have to be capable of multi-service and will have to isolate different classes of traffic through bandwidth partitioning such that, for example, low priority best-effort traffic does not cause delay for high priority video traffic. However, this research identifies that even within a class there may be delays or losses due to congestion and the problem will require different solutions in different classes. The focus of this research is on the requirements of the adaptive continuous media class. These are traffic flows that require a good Quality of Service but are also able to adapt to the network conditions by accepting some degradation in quality. It is potentially the most flexible traffic class and therefore, one of the most useful types for an increasing number of applications. This thesis discusses the QoS requirements of adaptive continuous media and identifies an ideal feedback based control system that would be suitable for this class. A number of current methods of congestion control have been investigated and two methods that have been shown to be successful with data traffic have been evaluated to ascertain if they could be adapted for adaptive continuous media. A novel method of control based on percentile monitoring of the queue occupancy is then proposed and developed. Simulation results demonstrate that the percentile monitoring based method is more appropriate to this type of flow. The problem of congestion control at aggregating nodes of the network hierarchy, where thousands of adaptive flows may be aggregated to a single flow, is then considered. A unique method of pricing mean and variance is developed such that each individual flow is charged fairly for its contribution to the congestion

SIMULATION AND ANALYSIS OF VEHICULAR AD-HOC NETWORKS IN URBAN AND RURAL AREAS

According to the American National Highway Traffic Safety Administration, in 2010, there were an estimated 5,419,000 police-reported traffic crashes, in which 32,885 people were killed and 2,239,000 people were injured in the US alone. Vehicular Ad-Hoc Network (VANET) is an emerging technology which promises to decrease car accidents by providing several safety related services such as blind spot, forward collision and sudden braking ahead warnings. Unfortunately, research of VANET is hindered by the extremely high cost and complexity of field testing. Hence it becomes important to simulate VANET protocols and applications thoroughly before attempting to implement them. This thesis studies the feasibility of common mobility and wireless channel models in VANET simulation and provides a general overview of the currently available VANET simulators and their features. Six different simulation scenarios are performed to evaluate the performance of AODV, DSDV, DSR and OLSR Ad-Hoc routing protocols with UDP and TCP packets. Simulation results indicate that reactive protocols are more robust and suitable for the highly dynamic VANET networks. Furthermore, TCP is found to be more suitable for VANET safety applications due to the high delay and packet drop of UDP packets.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format