Developing large-scale field-programmable analog arrays for rapid prototyping

Field-programmable analog arrays (FPAAs) provide a method for rapidly prototyping analog systems. While currently available FPAAs vary in architecture and interconnect design, they are often limited in size and flexibility. For FPAAs to be as useful and marketable as modern digital reconfigurable devices, new technologies must be explored to provide area efficient, accurately programmable analog circuitry that can be easily integrated into a larger digital/mixed signal system. By leveraging recent advances in floating gate transistors, a new generation of FPAAs are achievable that will dramatically advance the current state of the art in terms of size, functionality, and flexibility

Programming of Floating-Gate Transistors for Nonvolatile Analog Memory Array

Since they were introduced, floating-gate (FG) transistors have been used as non-volatile digital memory. Recent research has shown that floating-gate transistors can be successfully used as analog memory, specifically as programmable voltage and current sources. However, their proliferation has been limited due to the complex programming procedure and the complex testing equipment. Analog applications such as field-programmable analog arrays (FPAAs) require hundreds to thousands of floating-gate transistors on a single chip which makes the programming process even more complicated and very challenging. Therefore, a simplified, compact, and low-power scheme to program FGs are necessary. This work presents an improved version of the typical methodology for FG programming. Additionally, a novel programming methodology that utilizes negative voltages is presented here. This method simplifies the programming process by eliminating the use of supplementary and complicated infrastructure circuits, which makes the FG transistor a good candidate for low-power wireless sensor nodes and portable systems

Programmable mixed-signal circuits

A novel concept for programmable mixed-signal circuits is presented based on programmable transmission gates. For implementation, memristively switching devices are suggested as the most promising candidates for realization of fast and small-footprint signal routing switches with small resistance and capacity. As a proof-of-concept, LT Spice simulations of digital and analogue example circuits implemented by the new concept are demonstrated. It is discussed how important design parameters can be tuned in the circuity. Compared to competing technologies such as Field Programmable Analogue Arrays or Application-Specific Integrated Circuits, the presented concept allows for development of ultra-flexible, reconfigurable, and cheap embedded mixed-signal circuits for applications where only limited space is available or high bandwidth is required

Novel CCII-based Field Programmable Analog Array and its Application to a Sixth-Order Butterworth LPF

In this paper, a field programmable analog array (FPAA) is proposed. The proposed FPAA consists of seven configurable analog blocks (CABs) arranged in a hexagonal lattice such that the CABs are directly connected to each other. This structure improves the overall frequency response of the chip by decreasing the parasitic capacitances in the signal path. The CABS of the FPAA is based on a novel fully differential digitally programmable current conveyor (DPCCII). The programmability of the DPCCII is achieved using digitally controlled three-bit MOS ladder current division network. No extra biasing circuit is required to generate specific analog control voltage signals. The DPCCII has constant standby power consumption, offset voltage, bandwidth and harmonic distortions over all its programming range. A sixth-order Butterworth tunable LPF suitable for WLAN/WiMAX receivers is realized on the proposed FPAA. The filter power consumption is 5.4mW from 1V supply; it’s cutoff frequency is tuned from 5.2 MHz to 16.9 MHz. All the circuits are realized using 90nm CMOS technology from TSMC. All simulations are carried out using Cadence

Can my chip behave like my brain?

Many decades ago, Carver Mead established the foundations of neuromorphic systems. Neuromorphic systems are analog circuits that emulate biology. These circuits utilize subthreshold dynamics of CMOS transistors to mimic the behavior of neurons. The objective is to not only simulate the human brain, but also to build useful applications using these bio-inspired circuits for ultra low power speech processing, image processing, and robotics. This can be achieved using reconfigurable hardware, like field programmable analog arrays (FPAAs), which enable configuring different applications on a cross platform system. As digital systems saturate in terms of power efficiency, this alternate approach has the potential to improve computational efficiency by approximately eight orders of magnitude. These systems, which include analog, digital, and neuromorphic elements combine to result in a very powerful reconfigurable processing machine.Ph.D

Analog-to-digital Converter With Programmable Floating Gate

Systems and methods are discussed for using a floating-gate MOSFET as a programmable reference circuit. One example of the programmable reference circuit is a programmable voltage reference source, while a second example of a programmable reference circuit is a programmable reference current source. The programmable voltage reference source and/or the reference current source may be incorporated into several types of circuits, such as comparator circuits, current-mirror circuits, and converter circuits. Comparator circuits and current-mirror circuits are often incorporated into circuits such as converter circuits. Converter circuits include analog-to-digital converters and digital-to-analog converters.Georgia Tech Research Corporatio

Mixed Signal Integrated Circuit Design for Custom Sensor Interfacing

Low-power analog integrated circuits (ICs) can be utilized at the interface between an analog sensor and a digital system\u27s input to decrease power consumption, increase system accuracy, perform signal processing, and make the necessary adjustments for compatibility between the two devices. This interfacing has typically been done with custom integrated solutions, but advancements in floating-gate technologies have made reconfigurable analog ICs a competitive option. Whether the solution is a custom design or built from a reconfigurable system, digital peripheral circuits are needed to configure their operation for these analog circuits to work with the best accuracy.;Using an analog IC as a front end signal processor between an analog sensor and wireless sensor mote can greatly decrease battery consumption. Processing in the digital domain requires more power than when done on an analog system. An Analog Signal Processor (ASP) can allow the digital wireless mote to remain in sleep mode while the ASP is always listening for an important event. Once this event occurs, the ASP will wake the wireless mote, allowing it to record the event and send radio transmissions if necessary. As most wireless sensor networks employ the use of batteries as a power source, an energy harvesting system in addition to an ASP can be used to further supplement this battery consumption.;This thesis documents the development of mixed-signal integrated circuits for use as interfaces between analog sensors and digital Wireless Sensor Networks (WSNs). The following work outlines, as well as shows the results, of development for sensor interfacing utilizing both custom mixed signal integrated circuits as well as a Field Programmable Analog Array (FPAA) for post fabrication customization. An Analog Signal Processor (ASP) has been used in an Acoustic Vehicle Classification system. To keep these interfacing methods low power, a prototype energy harvesting system using commercial-off-the-shelf (COTS) devices is detailed which has led to the design of a fully integrated solution

Floating-Gate Design and Linearization for Reconfigurable Analog Signal Processing

Analog and mixed-signal integrated circuits have found a place in modern electronics design as a viable alternative to digital pre-processing. With metrics that boast high accuracy and low power consumption, analog pre-processing has opened the door to low-power state-monitoring systems when it is utilized in place of a power-hungry digital signal-processing stage. However, the complicated design process required by analog and mixed-signal systems has been a barrier to broader applications. The implementation of floating-gate transistors has begun to pave the way for a more reasonable approach to analog design. Floating-gate technology has widespread use in the digital domain. Analog and mixed-signal use of floating-gate transistors has only become a rising field of study in recent years. Analog floating gates allow for low-power implementation of mixed-signal systems, such as the field-programmable analog array, while simultaneously opening the door to complex signal-processing techniques. The field-programmable analog array, which leverages floating-gate technologies, is demonstrated as a reliable replacement to signal-processing tasks previously only solved by custom design. Living in an analog world demands the constant use and refinement of analog signal processing for the purpose of interfacing with digital systems. This work offers a comprehensive look at utilizing floating-gate transistors as the core element for analog signal-processing tasks. This work demonstrates the floating gate\u27s merit in large reconfigurable array-driven systems and in smaller-scale implementations, such as linearization techniques for oscillators and analog-to-digital converters. A study on analog floating-gate reliability is complemented with a temperature compensation scheme for implementing these systems in ever-changing, realistic environments

Low-Power Reconfigurable Sensing Circuitry for the Internet-of-Things Paradigm

With ubiquitous wireless communication via Wi-Fi and nascent 5th Generation mobile communications, more devices -- both smart and traditionally dumb -- will be interconnected than ever before. This burgeoning trend is referred to as the Internet-of-Things. These new sensing opportunities place a larger burden on the underlying circuitry that must operate on finite battery power and/or within energy-constrained environments. New developments of low-power reconfigurable analog sensing platforms like field-programmable analog arrays (FPAAs) present an attractive sensing solution by processing data in the analog domain while staying flexible in design. This work addresses some of the contemporary challenges of low-power wireless sensing via traditional application-specific sensing and with FPAAs. A large emphasis is placed on furthering the development of FPAAs by making them more accessible to designers without a strong integrated-circuit background -- much like FPGAs have done for digital designers