SATTA: a Self-Adaptive Temperature-based TDF awareness methodology for dynamically reconfigurable FPGAs

Dependability issues due to non functional properties are emerging as major cause of faults in modern digital systems. Effective countermeasures have to be presented to properly manage their critical timing effects. This paper presents a methodology to avoid transition delay faults in FPGA-based systems, with low area overhead. The approach is able to exploit temperature information and aging characteristics to minimize the cost in terms of performances degradation and power consumption. The architecture of a hardware manager able to avoid delay faults is presented and deeply analyzed, as well as its integration in the standard implementation design flow

로직 및 피지컬 합성에서의 타이밍 분석과 최적화

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 김태환.Timing analysis is one of the necessary steps in the development of a semiconductor circuit. In addition, it is increasingly important in the advanced process technologies due to various factors, including the increase of process–voltage–temperature variation. This dissertation addresses three problems related to timing analysis and optimization in logic and physical synthesis. Firstly, most static timing analysis today are based on conventional fixed flip-flop timing models, in which every flip-flop is assumed to have a fixed clock-to-Q delay. However, setup and hold skews affect the clock-to-Q delay in reality. In this dissertation, I propose a mathematical formulation to solve the problem and apply it to the clock skew scheduling problems as well as to the analysis of a given circuit, with a scalable speedup technique. Secondly, near-threshold computing is one of the promising concepts for energy-efficient operation of VLSI systems, but wide performance variation and nonlinearity to process variations block the proliferation. To cope with this, I propose a holistic hardware performance monitoring methodology for accurate timing prediction in a near-threshold voltage regime and advanced process technology. Lastly, an asynchronous circuit is one of the alternatives to the conventional synchronous style, and asynchronous pipeline circuit especially attractive because of its small design effort. This dissertation addresses the synthesis problem of lightening two-phase bundled-data asynchronous pipeline controllers, in which delay buffers are essential for guaranteeing the correct handshaking operation but incurs considerable area increase.타이밍 분석은 반도체 회로 개발 필수 과정 중 하나로, 최신 공정일수록 공정-전압-온도 변이 증가를 포함한 다양한 요인으로 하여금 그 중요성이 커지고 있다. 본 논문에서는 로직 및 피지컬 합성과 관련하여 세 가지 타이밍 분석 및 최적화 문제에 대해 다룬다. 첫째로, 오늘날 대부분의 정적 타이밍 분석은 모든 플립-플롭의 클럭-출력 딜레이가 고정된 값이라는 가정을 바탕으로 이루어졌다. 하지만 실제 클럭-출력 딜레이는 해당 플립-플롭의 셋업 및 홀드 스큐에 영향을 받는다. 본 논문에서는 이러한 특성을 수학적으로 정리하였으며, 이를 확장 가능한 속도 향상 기법과 더불어 주어진 회로의 타이밍 분석 및 클럭 스큐 스케쥴링 문제에 적용하였다. 둘째로, 유사 문턱 연산은 초고집적 회로 동작의 에너지 효율을 끌어 올릴 수 있다는 점에서 각광받지만, 큰 폭의 성능 변이 및 비선형성 때문에 널리 활용되고 있지 않다. 이를 해결하기 위해 유사 문턱 전압 영역 및 최신 공정 노드에서 보다 정확한 타이밍 예측을 위한 하드웨어 성능 모니터링 방법론 전반을 제안하였다. 마지막으로, 비동기 회로는 기존 동기 회로의 대안 중 하나로, 그 중에서도 비동기 파이프라인 회로는 비교적 적은 설계 노력만으로도 구현 가능하다는 장점이 있다. 본 논문에서는 2위상 묶음 데이터 프로토콜 기반 비동기 파이프라인 컨트롤러 상에서, 정확한 핸드셰이킹 통신을 위해 삽입된 딜레이 버퍼에 의한 면적 증가를 완화할 수 있는 합성 기법을 제시하였다.1 INTRODUCTION 1 1.1 Flexible Flip-Flop Timing Model 1 1.2 Hardware Performance Monitoring Methodology 4 1.3 Asynchronous Pipeline Controller 10 1.4 Contributions of this Dissertation 15 2 ANALYSIS AND OPTIMIZATION CONSIDERING FLEXIBLE FLIP-FLOP TIMING MODEL 17 2.1 Preliminaries 17 2.1.1 Terminologies 17 2.1.2 Timing Analysis 20 2.1.3 Clock-to-Q Delay Surface Modeling 21 2.2 Clock-to-Q Delay Interval Analysis 22 2.2.1 Derivation 23 2.2.2 Additional Constraints 26 2.2.3 Analysis: Finding Minimum Clock Period 28 2.2.4 Optimization: Clock Skew Scheduling 30 2.2.5 Scalable Speedup Technique 33 2.3 Experimental Results 37 2.3.1 Application to Minimum Clock Period Finding 37 2.3.2 Application to Clock Skew Scheduling 39 2.3.3 Efficacy of Scalable Speedup Technique 43 2.4 Summary 44 3 HARDWARE PERFORMANCE MONITORING METHODOLOGY AT NTC AND ADVANCED TECHNOLOGY NODE 45 3.1 Overall Flow of Proposed HPM Methodology 45 3.2 Prerequisites to HPM Methodology 47 3.2.1 BEOL Process Variation Modeling 47 3.2.2 Surrogate Model Preparation 49 3.3 HPM Methodology: Design Phase 52 3.3.1 HPM2PV Model Construction 52 3.3.2 Optimization of Monitoring Circuits Configuration 54 3.3.3 PV2CPT Model Construction 58 3.4 HPM Methodology: Post-Silicon Phase 60 3.4.1 Transfer Learning in Silicon Characterization Step 60 3.4.2 Procedures in Volume Production Phase 61 3.5 Experimental Results 62 3.5.1 Experimental Setup 62 3.5.2 Exploration of Monitoring Circuits Configuration 64 3.5.3 Effectiveness of Monitoring Circuits Optimization 66 3.5.4 Considering BEOL PVs and Uncertainty Learning 68 3.5.5 Comparison among Different Prediction Flows 69 3.5.6 Effectiveness of Prediction Model Calibration 71 3.6 Summary 73 4 LIGHTENING ASYNCHRONOUS PIPELINE CONTROLLER 75 4.1 Preliminaries and State-of-the-Art Work 75 4.1.1 Bundled-data vs. Dual-rail Asynchronous Circuits 75 4.1.2 Two-phase vs. Four-phase Bundled-data Protocol 76 4.1.3 Conventional State-of-the-Art Pipeline Controller Template 77 4.2 Delay Path Sharing for Lightening Pipeline Controller Template 78 4.2.1 Synthesizing Sharable Delay Paths 78 4.2.2 Validating Logical Correctness for Sharable Delay Paths 80 4.2.3 Reformulating Timing Constraints of Controller Template 81 4.2.4 Minimally Allocating Delay Buffers 87 4.3 In-depth Pipeline Controller Template Synthesis with Delay Path Reusing 88 4.3.1 Synthesizing Delay Path Units 88 4.3.2 Validating Logical Correctness of Delay Path Units 89 4.3.3 Updating Timing Constraints for Delay Path Units 91 4.3.4 In-depth Synthesis Flow Utilizing Delay Path Units 95 4.4 Experimental Results 99 4.4.1 Environment Setup 99 4.4.2 Piecewise Linear Modeling of Delay Path Unit Area 99 4.4.3 Comparison of Power, Performance, and Area 102 4.5 Summary 107 5 CONCLUSION 109 5.1 Chapter 2 109 5.2 Chapter 3 110 5.3 Chapter 4 110 Abstract (In Korean) 127Docto

Timing-Error Tolerance Techniques for Low-Power DSP: Filters and Transforms

Low-power Digital Signal Processing (DSP) circuits are critical to commercial System-on-Chip design for battery powered devices. Dynamic Voltage Scaling (DVS) of digital circuits can reclaim worst-case supply voltage margins for delay variation, reducing power consumption. However, removing static margins without compromising robustness is tremendously challenging, especially in an era of escalating reliability concerns due to continued process scaling. The Razor DVS scheme addresses these concerns, by ensuring robustness using explicit timing-error detection and correction circuits. Nonetheless, the design of low-complexity and low-power error correction is often challenging. In this thesis, the Razor framework is applied to fixed-precision DSP filters and transforms. The inherent error tolerance of many DSP algorithms is exploited to achieve very low-overhead error correction. Novel error correction schemes for DSP datapaths are proposed, with very low-overhead circuit realisations. Two new approximate error correction approaches are proposed. The first is based on an adapted sum-of-products form that prevents errors in intermediate results reaching the output, while the second approach forces errors to occur only in less significant bits of each result by shaping the critical path distribution. A third approach is described that achieves exact error correction using time borrowing techniques on critical paths. Unlike previously published approaches, all three proposed are suitable for high clock frequency implementations, as demonstrated with fully placed and routed FIR, FFT and DCT implementations in 90nm and 32nm CMOS. Design issues and theoretical modelling are presented for each approach, along with SPICE simulation results demonstrating power savings of 21 – 29%. Finally, the design of a baseband transmitter in 32nm CMOS for the Spectrally Efficient FDM (SEFDM) system is presented. SEFDM systems offer bandwidth savings compared to Orthogonal FDM (OFDM), at the cost of increased complexity and power consumption, which is quantified with the first VLSI architecture

Runtime Monitoring for Dependable Hardware Design

Mit dem Voranschreiten der Technologieskalierung und der Globalisierung der Produktion von integrierten Schaltkreisen eröffnen sich eine Fülle von Schwachstellen bezüglich der Verlässlichkeit von Computerhardware. Jeder Mikrochip wird aufgrund von Produktionsschwankungen mit einem einzigartigen Charakter geboren, welcher sich durch seine Arbeitsbedingungen, Belastung und Umgebung in individueller Weise entwickelt. Daher sind deterministische Modelle, welche zur Entwurfszeit die Verlässlichkeit prognostizieren, nicht mehr ausreichend um Integrierte Schaltkreise mit Nanometertechnologie sinnvoll abbilden zu können. Der Bedarf einer Laufzeitanalyse des Zustandes steigt und mit ihm die notwendigen Maßnahmen zum Erhalt der Zuverlässigkeit. Transistoren sind anfällig für auslastungsbedingte Alterung, die die Laufzeit der Schaltung erhöht und mit ihr die Möglichkeit einer Fehlberechnung. Hinzu kommen spezielle Abläufe die das schnelle Altern des Chips befördern und somit seine zuverlässige Lebenszeit reduzieren. Zusätzlich können strahlungsbedingte Laufzeitfehler (Soft-Errors) des Chips abnormales Verhalten kritischer Systeme verursachen. Sowohl das Ausbreiten als auch das Maskieren dieser Fehler wiederum sind abhängig von der Arbeitslast des Systems. Fabrizierten Chips können ebenfalls vorsätzlich während der Produktion boshafte Schaltungen, sogenannte Hardwaretrojaner, hinzugefügt werden. Dies kompromittiert die Sicherheit des Chips. Da diese Art der Manipulation vor ihrer Aktivierung kaum zu erfassen ist, ist der Nachweis von Trojanern auf einem Chip direkt nach der Produktion extrem schwierig. Die Komplexität dieser Verlässlichkeitsprobleme machen ein einfaches Modellieren der Zuverlässigkeit und Gegenmaßnahmen ineffizient. Sie entsteht aufgrund verschiedener Quellen, eingeschlossen der Entwicklungsparameter (Technologie, Gerät, Schaltung und Architektur), der Herstellungsparameter, der Laufzeitauslastung und der Arbeitsumgebung. Dies motiviert das Erforschen von maschinellem Lernen und Laufzeitmethoden, welche potentiell mit dieser Komplexität arbeiten können. In dieser Arbeit stellen wir Lösungen vor, die in der Lage sind, eine verlässliche Ausführung von Computerhardware mit unterschiedlichem Laufzeitverhalten und Arbeitsbedingungen zu gewährleisten. Wir entwickelten Techniken des maschinellen Lernens um verschiedene Zuverlässigkeitseffekte zu modellieren, zu überwachen und auszugleichen. Verschiedene Lernmethoden werden genutzt, um günstige Überwachungspunkte zur Kontrolle der Arbeitsbelastung zu finden. Diese werden zusammen mit Zuverlässigkeitsmetriken, aufbauend auf Ausfallsicherheit und generellen Sicherheitsattributen, zum Erstellen von Vorhersagemodellen genutzt. Des Weiteren präsentieren wir eine kosten-optimierte Hardwaremonitorschaltung, welche die Überwachungspunkte zur Laufzeit auswertet. Im Gegensatz zum aktuellen Stand der Technik, welcher mikroarchitektonische Überwachungspunkte ausnutzt, evaluieren wir das Potential von Arbeitsbelastungscharakteristiken auf der Logikebene der zugrundeliegenden Hardware. Wir identifizieren verbesserte Features auf Logikebene um feingranulare Laufzeitüberwachung zu ermöglichen. Diese Logikanalyse wiederum hat verschiedene Stellschrauben um auf höhere Genauigkeit und niedrigeren Overhead zu optimieren. Wir untersuchten die Philosophie, Überwachungspunkte auf Logikebene mit Hilfe von Lernmethoden zu identifizieren und günstigen Monitore zu implementieren um eine adaptive Vorbeugung gegen statisches Altern, dynamisches Altern und strahlungsinduzierte Soft-Errors zu schaffen und zusätzlich die Aktivierung von Hardwaretrojanern zu erkennen. Diesbezüglich haben wir ein Vorhersagemodell entworfen, welches den Arbeitslasteinfluss auf alterungsbedingte Verschlechterungen des Chips mitverfolgt und dazu genutzt werden kann, dynamisch zur Laufzeit vorbeugende Techniken, wie Task-Mitigation, Spannungs- und Frequenzskalierung zu benutzen. Dieses Vorhersagemodell wurde in Software implementiert, welche verschiedene Arbeitslasten aufgrund ihrer Alterungswirkung einordnet. Um die Widerstandsfähigkeit gegenüber beschleunigter Alterung sicherzustellen, stellen wir eine Überwachungshardware vor, welche einen Teil der kritischen Flip-Flops beaufsichtigt, nach beschleunigter Alterung Ausschau hält und davor warnt, wenn ein zeitkritischer Pfad unter starker Alterungsbelastung steht. Wir geben die Implementierung einer Technik zum Reduzieren der durch das Ausführen spezifischer Subroutinen auftretenden Belastung von zeitkritischen Pfaden. Zusätzlich schlagen wir eine Technik zur Abschätzung von online Soft-Error-Schwachstellen von Speicherarrays und Logikkernen vor, welche auf der Überwachung einer kleinen Gruppe Flip-Flops des Entwurfs basiert. Des Weiteren haben wir eine Methode basierend auf Anomalieerkennung entwickelt, um Arbeitslastsignaturen von Hardwaretrojanern während deren Aktivierung zur Laufzeit zu erkennen und somit eine letzte Verteidigungslinie zu bilden. Basierend auf diesen Experimenten demonstriert diese Arbeit das Potential von fortgeschrittener Feature-Extraktion auf Logikebene und lernbasierter Vorhersage basierend auf Laufzeitdaten zur Verbesserung der Zuverlässigkeit von Harwareentwürfen

Design and test for timing uncertainty in VLSI circuits.

由於特徵尺寸不斷縮小，集成電路在生產過程中的工藝偏差在運行環境中溫度和電壓等參數的波動以及在使用過程中的老化等效應越來越嚴重，導致芯片的時序行為出現很大的不確定性。多數情況下，芯片的關鍵路徑會不時出現時序錯誤。加入更多的時序餘量不是一種很好的解決方案，因為這種保守的設計方法會抵消工藝進步帶來的性能上的好處。這就為設計一個時序可靠的系統提出了極大的挑戰，其中的一些關鍵問題包括：(一)如何有效地分配有限的功率預算去優化那些正爆炸式增加的關鍵路徑的時序性能；(二)如何產生能夠捕捉準確的最壞情況時延的高品質測試向量；(三)為了能夠取得更好的功耗和性能上的平衡，我們將不得不允許芯片在使用過程中出現一些頻率很低的時序錯誤。隨之而來的問題是如何做到在線的檢錯和糾錯。為了解決上述問題，我們首先發明了一種新的技術用於識別所謂的虛假路徑，該方法使我們能夠發現比傳統方法更多的虛假路徑。當將所提取的虛假路徑集成到靜態時序分析工具里以後，我們可以得到更為準確的時序分析結果，同時也能節省本來用於優化這些路徑的成本。接著，考慮到現有的延時自動向量生成(ATPG) 方法會產生功能模式下無法出現的測試向量，這種向量可能會造成測試過程中在被激活的路徑周圍出現過多(或過少)的電源噪聲(PSN) ，從而導致測試過度或者測試不足情況。為此，我們提出了一種新的偽功能ATPG工具。通過同時考慮功能約束以及電路的物理佈局信息，我們使用類似ATPG 的算法產生狀態跳變使其能最大化已激活的路徑周圍的PSN影響。最後，基於近似電路的原理，我們提出了一種新的在線原位校正技術，即InTimeFix，用於糾正時序錯誤。由於實現近似電路的綜合僅需要簡單的電路結構分析，因此該技術能夠很容易的擴展到大型電路設計上去。With technology scaling, integrated circuits (ICs) suffer from increasing process, voltage, and temperature (PVT) variations and aging effects. In most cases, these reliability threats manifest themselves as timing errors on speed-paths (i.e., critical or near-critical paths) of the circuit. Embedding a large design guard band to prevent timing errors to occur is not an attractive solution, since this conservative design methodology diminishes the benefit of technology scaling. This creates several challenges on build a reliable systems, and the key problems include (i) how to optimize circuit’s timing performance with limited power budget for explosively increased potential speed-paths; (ii) how to generate high quality delay test pattern to capture ICs’ accurate worst-case delay; (iii) to have better power and performance tradeoff, we have to accept some infrequent timing errors in circuit’s the usage phase. Therefore, the question is how to achieve online timing error resilience.To address the above issues, we first develop a novel technique to identify so-called false paths, which facilitate us to find much more false paths than conventional methods. By integrating our identified false paths into static timing analysis tool, we are able to achieve more accurate timing information and also save the cost used to optimize false paths. Then, due to the fact that existing delay automated test pattern generation (ATPG) methods may generate test patterns that are functionally-unreachable, and such patterns may incur excessive (or limited) power supply noise (PSN) on sensitized paths in test mode, thus leading to over-testing or under-testing of the circuits, we propose a novel pseudo-functional ATPG tool. By taking both circuit layout information and functional constrains into account, we use ATPG like algorithm to justify transitions that pose the maximized functional PSN effects on sensitized critical paths. Finally, we propose a novel in-situ correction technique to mask timing errors, namely InTimeFix, by introducing redundant approximation circuit with more timing slack for speed-paths into the design. The synthesis of the approximation circuit relies on simple structural analysis of the original circuit, which is easily scalable to large IC designs.Detailed summary in vernacular field only.Detailed summary in vernacular field only.Yuan, Feng.Thesis (Ph.D.)--Chinese University of Hong Kong, 2012.Includes bibliographical references (leaves 88-100).Abstract also in Chinese.Abstract --- p.iAcknowledgement --- p.ivChapter 1 --- Introduction --- p.1Chapter 1.1 --- Challenges to Solve Timing Uncertainty Problem --- p.2Chapter 1.2 --- Contributions and Thesis Outline --- p.5Chapter 2 --- Background --- p.7Chapter 2.1 --- Sources of Timing Uncertainty --- p.7Chapter 2.1.1 --- Process Variation --- p.7Chapter 2.1.2 --- Runtime Environment Fluctuation --- p.9Chapter 2.1.3 --- Aging Effect --- p.10Chapter 2.2 --- Technical Flow to Solve Timing Uncertainty Problem --- p.10Chapter 2.3 --- False Path --- p.12Chapter 2.3.1 --- Path Sensitization Criteria --- p.12Chapter 2.3.2 --- False Path Aware Timing Analysis --- p.13Chapter 2.4 --- Manufacturing Testing --- p.14Chapter 2.4.1 --- Functional Testing vs. Structural Testing --- p.14Chapter 2.4.2 --- Scan-Based DfT --- p.15Chapter 2.4.3 --- Pseudo-Functional Testing --- p.17Chapter 2.5 --- Timing Error Tolerance --- p.19Chapter 2.5.1 --- Timing Error Detection --- p.19Chapter 2.5.2 --- Timing Error Recover --- p.20Chapter 3 --- Timing-Independent False Path Identification --- p.23Chapter 3.1 --- Introduction --- p.23Chapter 3.2 --- Preliminaries and Motivation --- p.26Chapter 3.2.1 --- Motivation --- p.27Chapter 3.3 --- False Path Examination Considering Illegal States --- p.28Chapter 3.3.1 --- Path Sensitization Criterion --- p.28Chapter 3.3.2 --- Path-Aware Illegal State Identification --- p.30Chapter 3.3.3 --- Proposed Examination Procedure --- p.31Chapter 3.4 --- False Path Identification --- p.32Chapter 3.4.1 --- Overall Flow --- p.34Chapter 3.4.2 --- Static Implication Learning --- p.35Chapter 3.4.3 --- Suspicious Node Extraction --- p.36Chapter 3.4.4 --- S-Frontier Propagation --- p.37Chapter 3.5 --- Experimental Results --- p.38Chapter 3.6 --- Conclusion and Future Work --- p.42Chapter 4 --- PSN Aware Pseudo-Functional Delay Testing --- p.43Chapter 4.1 --- Introduction --- p.43Chapter 4.2 --- Preliminaries and Motivation --- p.45Chapter 4.2.1 --- Motivation --- p.46Chapter 4.3 --- Proposed Methodology --- p.48Chapter 4.4 --- Maximizing PSN Effects under Functional Constraints --- p.50Chapter 4.4.1 --- Pseudo-Functional Relevant Transitions Generation --- p.51Chapter 4.5 --- Experimental Results --- p.59Chapter 4.5.1 --- Experimental Setup --- p.59Chapter 4.5.2 --- Results and Discussion --- p.60Chapter 4.6 --- Conclusion --- p.64Chapter 5 --- In-Situ Timing Error Masking in Logic Circuits --- p.65Chapter 5.1 --- Introduction --- p.65Chapter 5.2 --- Prior Work and Motivation --- p.67Chapter 5.3 --- In-Situ Timing Error Masking with Approximate Logic --- p.69Chapter 5.3.1 --- Equivalent Circuit Construction with Approximate Logic --- p.70Chapter 5.3.2 --- Timing Error Masking with Approximate Logic --- p.72Chapter 5.4 --- Cost-Efficient Synthesis for InTimeFix --- p.75Chapter 5.4.1 --- Overall Flow --- p.76Chapter 5.4.2 --- Prime Critical Segment Extraction --- p.77Chapter 5.4.3 --- Prime Critical Segment Merging --- p.79Chapter 5.5 --- Experimental Results --- p.81Chapter 5.5.1 --- Experimental Setup --- p.81Chapter 5.5.2 --- Results and Discussion --- p.82Chapter 5.6 --- Conclusion --- p.85Chapter 6 --- Conclusion and Future Work --- p.86Bibliography --- p.10

Circuits and Systems Advances in Near Threshold Computing

Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing

Dynamic Partial Reconfiguration for Dependable Systems

Moore’s law has served as goal and motivation for consumer electronics manufacturers in the last decades. The results in terms of processing power increase in the consumer electronics devices have been mainly achieved due to cost reduction and technology shrinking. However, reducing physical geometries mainly affects the electronic devices’ dependability, making them more sensitive to soft-errors like Single Event Transient (SET) of Single Event Upset (SEU) and hard (permanent) faults, e.g. due to aging effects. Accordingly, safety critical systems often rely on the adoption of old technology nodes, even if they introduce longer design time w.r.t. consumer electronics. In fact, functional safety requirements are increasingly pushing industry in developing innovative methodologies to design high-dependable systems with the required diagnostic coverage. On the other hand commercial off-the-shelf (COTS) devices adoption began to be considered for safety-related systems due to real-time requirements, the need for the implementation of computationally hungry algorithms and lower design costs. In this field FPGA market share is constantly increased, thanks to their flexibility and low non-recurrent engineering costs, making them suitable for a set of safety critical applications with low production volumes. The works presented in this thesis tries to face new dependability issues in modern reconfigurable systems, exploiting their special features to take proper counteractions with low impacton performances, namely Dynamic Partial Reconfiguration