Multi-h synchronisation for codes with long constraints-length

Bibliography: p. 64.This dissertation investigates the synchronisation of Multi-h signals with a long constraint length. However, Multi-h codes exhibiting a long constraint length invariably also exhibit a large denominator q. Since traditional methods for synchronising Multi-h signals utilises a q-th power law device, where the frequency spectrum of the qth power of the signal renders all the necessary frequencies for synchronisation, we suspect that a large q could be detrimental. When simulated, it turns out that the qth power law device fails to deliver distinct (and useable) frequency components at a q size of about 8. Unfortunately, the most useful codes have denominators starting at a size of q equals 32. This called for a novel approach to synchronisation. One device that shows much potential is the new Massey-Hodgart coherent MSK demodulator. In a significant departure from standard quadrature structures, this MSK demodulator uses matched filter detection with a pair of reference signals at the two MSK signaling frequencies; an optimal maximum-likelihood bit decision is then formed over two bit intervals. The reference signals are recovered by a pair of decision-switched Costas loops, which are tightly integrated with the demodulator structure. The goal was to modify the Massey-Hodgart MSK demodulator into a Multi-h synchroniser that contained matched filter detection for all the frequencies in the Multi-h signal. The reference frequencies would still be decision switched and recovered by Costas loops

Signal-to-noise ratio estimation in digital computer simulation of lowpass and bandpass systems with applications to analog and digital communications, volume 3

Techniques are developed to estimate power gain, delay, signal-to-noise ratio, and mean square error in digital computer simulations of lowpass and bandpass systems. The techniques are applied to analog and digital communications. The signal-to-noise ratio estimates are shown to be maximum likelihood estimates in additive white Gaussian noise. The methods are seen to be especially useful for digital communication systems where the mapping from the signal-to-noise ratio to the error probability can be obtained. Simulation results show the techniques developed to be accurate and quite versatile in evaluating the performance of many systems through digital computer simulation

Enhanced frequency management for automatic HF radio communication systems

The work described in this thesis aims to enhance the frequency management of automatic high frequency (HF) radio communication systems. During the research programme two new frequency management tools were developed; a chirpsounder monitoring tool to provide accuracy enhancement information for propagation prediction programs and an algorithm designed to allow optimisation of signal formats, so that in-band interference is avoided and the overall system throughput rate is increased. Two new HF communication system architectures are presented, which use system design and programming methodologies derived from the fields of artificial intelligence and computer networks.The characteristics of the HF band are presented from a communicator's viewpoint, rather than the generalised, technical approach normally associated with such reviews. The methods employed by current HF communication systems to overcome the inherent time and frequency variability of HF channels are presented in the form of reviews of propagation, natural noise and co-channel interference prediction methods, embedded real-time channel evaluation algorithms and HF communications system architectures. The inadequacies of these current techniques are analysed. The eradication of their shortcomings is the main objective of the work described in the thesis.The short-term inaccuracies associated with current propagation analysis procedures can limit the performance of automatic HF communication systems. An accuracy enhancement methodology is proposed which makes use of measurements made on oblique chirpsounder transmitters. In order to provide accuracy enhancement data, a chirpsounder-based, propagation monitor was constructed. Its implementation and trials are described and methods of using its output to enhance prediction model accuracy are discussed. Ways in which its performance may be improved are detailed.The theory of a technique, termed "template correlation", which provides automatic HF communication systems with signal format adaptation data in order to enable them to avoid in-band interference, is presented. The objective of this work is to enhance the error-free capacity of a channel via adaptation of the signal. The results of computer simulations and laboratory bench trials of template correlation are presented. Enhancements of the technique in the light of the trials results are included.Two proposed design methodologies for automatic HF communication systems are described. The first uses many of the frequency management tools associated with current automatic systems and it combines the information from these using a blackboard-based expert system architecture. The second proposed design is more conceptual than the first. An inductive expert system is employed to produce rules describing the ways in which an automatic HF system should respond to certain path conditions. Examples of how such a system might function are given.The single, most important factor which has enabled the techniques described in this thesis to be feasible is the availability of cheap but powerful microprocessors. Thus the overall philosophy of the work is to improve the performance of automatic HF communication systems via the incorporation of processing power and "intelligent software" into the communication system's terminals

Cost-Effective and Energy-Efficient Techniques for Underwater Acoustic Communication Modems

Finally, the modem developed has been tested experimentally in laboratory (aquatic environment) showing that can communicates at different data rates (100..1200 bps) compared to state-of-the-art research modems. The software used include LabVIEW, MATLAB, Simulink, and Multisim (to test the electronic circuit built) has been employed.Underwater wireless sensor networks (UWSNs) are widely used in many applications related to ecosystem monitoring, and many more fields. Due to the absorption of electromagnetic waves in water and line-of-sight communication of optical waves, acoustic waves are the most suitable medium of communication in underwater environments. Underwater acoustic modem (UAM) is responsible for the transmission and reception of acoustic signals in an aquatic channel. Commercial modems may communicate at longer distances with reliability, but they are expensive and less power efficient. Research modems are designed by using a digital-signal-processor (DSP is expensive) and field-programmable-gate-array (FPGA is high power consuming device). In addition to, the use of a microcontroller is also a common practice (which is less expensive) but provides limited computational power. Hence, there is a need for a cost-effective and energy-efficient UAM to be used in budget limited applications. In this thesis different objectives are proposed. First, to identify the limitations of state-of-the-art commercial and research UAMs through a comprehensive survey. The second contribution has been the design of a low-cost acoustic modem for short-range underwater communications by using a single board computer (Raspberry-Pi), and a microcontroller (Atmega328P). The modulator, demodulator and amplifiers are designed with discrete components to reduce the overall cost. The third contribution is to design a web based underwater acoustic communication testbed along with a simulation platform (with underwater channel and sound propagation models), for testing modems. The fourth contribution is to integrate in a single module two important modules present in UAMs: the PSK modulator and the power amplifier

Classification and modeling of power line noise using machine learning techniques

A thesis submitted in ful lment of the requirements for the degree of Doctor of Philosophy in the School of Electrical and Information Engineering Faculty of Engineering and Built Environment June 2017The realization of robust, reliable and e cient data transmission have been the theme of recent research, most importantly in real channel such as the noisy, fading prone power line communication (PLC) channel. The focus is to exploit old techniques or create new techniques capable of improving the transmission reliability and also increasing the transmission capacity of the real communication channels. Multi-carrier modulation scheme such as Orthogonal Frequency Division Multiplexing (OFDM) utilizing conventional single-carrier modulation is developed to facilitate a robust data transmission, increasing transmission capacity (e cient bandwidth usage) and further reducing design complexity in PLC systems. On the contrary, the reliability of data transmission is subjected to several inhibiting factors as a result of the varying nature of the PLC channel. These inhibiting factors include noise, perturbation and disturbances. Contrary to the Additive White Gaussian noise (AWGN) model often assumed in several communication systems, this noise model fails to capture the attributes of noise encountered on the PLC channel. This is because periodic noise or random noise pulses injected by power electronic appliances on the network is a deviation from the AWGN. The nature of the noise is categorized as non-white non-Gaussian and unstable due to its impulsive attributes, thus, it is labeled as Non-additive White Gaussian Noise (NAWGN). These noise and disturbances results into long burst errors that corrupts signals being transmitted, thus, the PLC is labeled as a horrible or burst error channel. The e cient and optimal performance of a conventional linear receiver in the white Gaussian noise environment can therefore be made to drastically degrade in this NAWGN environment. Therefore, transmission reliability in such environment can be greatly enhanced if we know and exploit the knowledge of the channel's statistical attributes, thus, the need for developing statistical channel model based on empirical data. In this thesis, attention is focused on developing a recon gurable software de ned un-coded single-carrier and multicarrier PLC transceiver as a tool for realizing an optimized channel model for the narrowband PLC (NB-PLC) channel. First, a novel recon gurable software de ned un-coded single-carrier and multi-carrier PLC transceiver is developed for real-time NB-PLC transmission. The transceivers can be adapted to implement di erent waveforms for several real-time scenarios and performance evaluation. Due to the varying noise parameters obtained from country to country as a result of the dependence of noise impairment on mains voltages, topology of power line, place and time, the developed transceivers is capable of facilitating constant measurement campaigns to capture these varying noise parameters before statistical and mathematically inclined channel models are derived. Furthermore, the single-carrier (Binary Phase Shift Keying (BPSK), Di erential BPSK (DBPSK), Quadrature Phase Shift Keying (QPSK) and Di erential QPSK (DQPSK)) PLC transceiver system developed is used to facilitate a First-Order semi-hidden Fritchman Markov modeling (SHFMM) of the NB-PLC channel utilizing the e cient iterative Baum- Welch algorithm (BWA) for parameter estimation. The performance of each modulation scheme is evaluated in a mildly and heavily disturbed scenarios for both residential and laboratory site considered. The First-Order estimated error statistics of the realized First- Order SHFMM have been analytically validated in terms of performance metrics such as: log-likelihood ratio (LLR), error-free run distribution (EFRD), error probabilities, mean square error (MSE) and Chi-square ( 2) test. The reliability of the model results is also con rmed by an excellent match between the empirically obtained error sequence and the SHFMM regenerated error sequence as shown by the error-free run distribution plot. This thesis also reports a novel development of a low cost, low complexity Frequency-shift keying (FSK) - On-o keying (OOK) in-house hybrid PLC and VLC system. The functionality of this hybrid PLC-VLC transceiver system was ascertained at both residential and laboratory site at three di erent times of the day: morning, afternoon and evening. A First and Second-Order SHFMM of the hybrid system is realized. The error statistics of the realized First and Second-Order SHFMMs have been analytically validated in terms of LLR, EFRD, error probabilities, MSE and Chi-square ( 2). The Second-Order SHFMMs have also been analytically validated to be superior to the First-Order SHFMMs although at the expense of added computational complexity. The reliability of both First and Second-Order SHFMM results is con rmed by an excellent match between the empirical error sequences and SHFMM re-generated error sequences as shown by the EFRD plot. In addition, the multi-carrier (QPSK-OFDM, Di erential QPSK (DQPSK)-OFDM) and Di erential 8-PSK (D8PSK)-OFDM) PLC transceiver system developed is used to facilitate a First and Second-Order modeling of the NB-PLC system using the SHFMM and BWA for parameter estimation. The performance of each OFDM modulation scheme in evaluated and compared taking into consideration the mildly and heavily disturbed noise scenarios for the two measurement sites considered. The estimated error statistics of the realized SHFMMs have been analytically validated in terms of LLR, EFRD, error probabilities, MSE and Chi-square ( 2) test. The estimated Second-Order SHFMMs have been analytically validated to be outperform the First-Order SHFMMs although with added computational complexity. The reliability of the models is con rmed by an excellent match between the empirical data and SHFMM generated data as shown by the EFRD plot. The statistical models obtained using Baum-Welch to adjust the parameters of the adopted SHFMM are often locally maximized. To solve this problem, a novel Metropolis-Hastings algorithm, a Bayesian inference approach based on Markov Chain Monte Carlo (MCMC) is developed to optimize the parameters of the adopted SHFMM. The algorithm is used to optimize the model results obtained from the single-carrier and multi-carrier PLC systems as well as that of the hybrid PLC-VLC system. Consequently, as deduced from the results, the models obtained utilizing the novel Metropolis-Hastings algorithm are more precise, near optimal model with parameter sets that are closer to the global maxima. Generally, the model results obtained in this thesis are relevant in enhancing transmission reliability on the PLC channel through the use of the models to improve the adopted modulation schemes, create adaptive modulation techniques, develop and evaluate forward error correction (FEC) codes such as a concatenation of Reed-Solomon and Permutation codes and other robust codes suitable for exploiting and mitigating noise impairments encountered on the low voltage NB-PLC channel. Furthermore, the recon gurable software de ned NB-PLC transceiver test-bed developed can be utilized for future measurement campaign as well as adapted for multiple-input and multiple-output (MIMO) PLC applications.MT201

Classification and modeling of power line noise using machine learning techniques

A thesis submitted in ful lment of the requirements for the degree of Doctor of Philosophy in the School of Electrical and Information Engineering Faculty of Engineering and Built Environment June 2017The realization of robust, reliable and e cient data transmission have been the theme of recent research, most importantly in real channel such as the noisy, fading prone power line communication (PLC) channel. The focus is to exploit old techniques or create new techniques capable of improving the transmission reliability and also increasing the transmission capacity of the real communication channels. Multi-carrier modulation scheme such as Orthogonal Frequency Division Multiplexing (OFDM) utilizing conventional single-carrier modulation is developed to facilitate a robust data transmission, increasing transmission capacity (e cient bandwidth usage) and further reducing design complexity in PLC systems. On the contrary, the reliability of data transmission is subjected to several inhibiting factors as a result of the varying nature of the PLC channel. These inhibiting factors include noise, perturbation and disturbances. Contrary to the Additive White Gaussian noise (AWGN) model often assumed in several communication systems, this noise model fails to capture the attributes of noise encountered on the PLC channel. This is because periodic noise or random noise pulses injected by power electronic appliances on the network is a deviation from the AWGN. The nature of the noise is categorized as non-white non-Gaussian and unstable due to its impulsive attributes, thus, it is labeled as Non-additive White Gaussian Noise (NAWGN). These noise and disturbances results into long burst errors that corrupts signals being transmitted, thus, the PLC is labeled as a horrible or burst error channel. The e cient and optimal performance of a conventional linear receiver in the white Gaussian noise environment can therefore be made to drastically degrade in this NAWGN environment. Therefore, transmission reliability in such environment can be greatly enhanced if we know and exploit the knowledge of the channel's statistical attributes, thus, the need for developing statistical channel model based on empirical data. In this thesis, attention is focused on developing a recon gurable software de ned un-coded single-carrier and multicarrier PLC transceiver as a tool for realizing an optimized channel model for the narrowband PLC (NB-PLC) channel. First, a novel recon gurable software de ned un-coded single-carrier and multi-carrier PLC transceiver is developed for real-time NB-PLC transmission. The transceivers can be adapted to implement di erent waveforms for several real-time scenarios and performance evaluation. Due to the varying noise parameters obtained from country to country as a result of the dependence of noise impairment on mains voltages, topology of power line, place and time, the developed transceivers is capable of facilitating constant measurement campaigns to capture these varying noise parameters before statistical and mathematically inclined channel models are derived. Furthermore, the single-carrier (Binary Phase Shift Keying (BPSK), Di erential BPSK (DBPSK), Quadrature Phase Shift Keying (QPSK) and Di erential QPSK (DQPSK)) PLC transceiver system developed is used to facilitate a First-Order semi-hidden Fritchman Markov modeling (SHFMM) of the NB-PLC channel utilizing the e cient iterative Baum- Welch algorithm (BWA) for parameter estimation. The performance of each modulation scheme is evaluated in a mildly and heavily disturbed scenarios for both residential and laboratory site considered. The First-Order estimated error statistics of the realized First- Order SHFMM have been analytically validated in terms of performance metrics such as: log-likelihood ratio (LLR), error-free run distribution (EFRD), error probabilities, mean square error (MSE) and Chi-square ( 2) test. The reliability of the model results is also con rmed by an excellent match between the empirically obtained error sequence and the SHFMM regenerated error sequence as shown by the error-free run distribution plot. This thesis also reports a novel development of a low cost, low complexity Frequency-shift keying (FSK) - On-o keying (OOK) in-house hybrid PLC and VLC system. The functionality of this hybrid PLC-VLC transceiver system was ascertained at both residential and laboratory site at three di erent times of the day: morning, afternoon and evening. A First and Second-Order SHFMM of the hybrid system is realized. The error statistics of the realized First and Second-Order SHFMMs have been analytically validated in terms of LLR, EFRD, error probabilities, MSE and Chi-square ( 2). The Second-Order SHFMMs have also been analytically validated to be superior to the First-Order SHFMMs although at the expense of added computational complexity. The reliability of both First and Second-Order SHFMM results is con rmed by an excellent match between the empirical error sequences and SHFMM re-generated error sequences as shown by the EFRD plot. In addition, the multi-carrier (QPSK-OFDM, Di erential QPSK (DQPSK)-OFDM) and Di erential 8-PSK (D8PSK)-OFDM) PLC transceiver system developed is used to facilitate a First and Second-Order modeling of the NB-PLC system using the SHFMM and BWA for parameter estimation. The performance of each OFDM modulation scheme in evaluated and compared taking into consideration the mildly and heavily disturbed noise scenarios for the two measurement sites considered. The estimated error statistics of the realized SHFMMs have been analytically validated in terms of LLR, EFRD, error probabilities, MSE and Chi-square ( 2) test. The estimated Second-Order SHFMMs have been analytically validated to be outperform the First-Order SHFMMs although with added computational complexity. The reliability of the models is con rmed by an excellent match between the empirical data and SHFMM generated data as shown by the EFRD plot. The statistical models obtained using Baum-Welch to adjust the parameters of the adopted SHFMM are often locally maximized. To solve this problem, a novel Metropolis-Hastings algorithm, a Bayesian inference approach based on Markov Chain Monte Carlo (MCMC) is developed to optimize the parameters of the adopted SHFMM. The algorithm is used to optimize the model results obtained from the single-carrier and multi-carrier PLC systems as well as that of the hybrid PLC-VLC system. Consequently, as deduced from the results, the models obtained utilizing the novel Metropolis-Hastings algorithm are more precise, near optimal model with parameter sets that are closer to the global maxima. Generally, the model results obtained in this thesis are relevant in enhancing transmission reliability on the PLC channel through the use of the models to improve the adopted modulation schemes, create adaptive modulation techniques, develop and evaluate forward error correction (FEC) codes such as a concatenation of Reed-Solomon and Permutation codes and other robust codes suitable for exploiting and mitigating noise impairments encountered on the low voltage NB-PLC channel. Furthermore, the recon gurable software de ned NB-PLC transceiver test-bed developed can be utilized for future measurement campaign as well as adapted for multiple-input and multiple-output (MIMO) PLC applications.MT201

Advanced Modulation and Coding Technology Conference

The objectives, approach, and status of all current LeRC-sponsored industry contracts and university grants are presented. The following topics are covered: (1) the LeRC Space Communications Program, and Advanced Modulation and Coding Projects; (2) the status of four contracts for development of proof-of-concept modems; (3) modulation and coding work done under three university grants, two small business innovation research contracts, and two demonstration model hardware development contracts; and (4) technology needs and opportunities for future missions

Passive Mixer-based UWB Receiver with Low Loss, High Linearity and Noise-cancelling for Medical Applications

A double balanced passive mixer-based receiver operating in the 3-5 GHz UWB for medical applications is described in this paper. The receiver front-end circuit is composed of an inductorless low noise amplifier (LNA) followed by a fully differential voltage-driven double-balanced passive mixer. A duty cycle of 25% was chosen to eliminate overlap between LO signals, thereby improving receiver linearity. The LNA realizes a gain of 25.3 dB and a noise figure of 2.9 dB. The proposed receiver achieves an IIP3 of 3.14 dBm, an IIP2 of 17.5 dBm and an input return loss (S11) below -12.5dB. Designed in 0.18μm CMOS technology, the proposed mixer consumes 0.72pW from a 1.8V power supply. The designed receiver demonstrated a good ports isolation performance with LO_IF isolation of 60dB and RF_IF isolation of 78dB